Commit 0819ac8c authored by Suresh B. Siddha's avatar Suresh B. Siddha Committed by Linus Torvalds

[PATCH] Disable SW irqbalance/irqaffinity for E7520/E7320/E7525 - change TARGET_CPUS on x86_64

Set TARGET_CPUS on x86_64 to cpu_online_map.  This brings the code inline
with x86 mach-default.  Fix MSI_TARGET_CPU code which will break with this
target_cpus change.
Signed-off-by: default avatarSuresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
parent f1b519a3
......@@ -735,7 +735,7 @@ void __init setup_IO_APIC_irqs(void)
entry.delivery_mode = dest_LowestPrio;
entry.dest_mode = INT_DELIVERY_MODE;
entry.mask = 0; /* enable IRQ */
entry.dest.logical.logical_dest = TARGET_CPUS;
entry.dest.logical.logical_dest = cpu_mask_to_apicid(TARGET_CPUS);
idx = find_irq_entry(apic,pin,mp_INT);
if (idx == -1) {
......@@ -753,7 +753,7 @@ void __init setup_IO_APIC_irqs(void)
if (irq_trigger(idx)) {
entry.trigger = 1;
entry.mask = 1;
entry.dest.logical.logical_dest = TARGET_CPUS;
entry.dest.logical.logical_dest = cpu_mask_to_apicid(TARGET_CPUS);
}
irq = pin_2_irq(idx, apic, pin);
......@@ -803,7 +803,7 @@ void __init setup_ExtINT_IRQ0_pin(unsigned int pin, int vector)
*/
entry.dest_mode = INT_DELIVERY_MODE;
entry.mask = 0; /* unmask IRQ now */
entry.dest.logical.logical_dest = TARGET_CPUS;
entry.dest.logical.logical_dest = cpu_mask_to_apicid(TARGET_CPUS);
entry.delivery_mode = dest_LowestPrio;
entry.polarity = 0;
entry.trigger = 0;
......@@ -2011,7 +2011,7 @@ int io_apic_set_pci_routing (int ioapic, int pin, int irq, int edge_level, int a
entry.delivery_mode = dest_LowestPrio;
entry.dest_mode = INT_DELIVERY_MODE;
entry.dest.logical.logical_dest = TARGET_CPUS;
entry.dest.logical.logical_dest = cpu_mask_to_apicid(TARGET_CPUS);
entry.trigger = edge_level;
entry.polarity = active_high_low;
entry.mask = 1; /* Disabled (masked) */
......@@ -2069,3 +2069,28 @@ void send_IPI_self(int vector)
apic_write_around(APIC_ICR, cfg);
}
#endif
/*
* This function currently is only a helper for the i386 smp boot process where
* we need to reprogram the ioredtbls to cater for the cpus which have come online
* so mask in all cases should simply be TARGET_CPUS
*/
void __init setup_ioapic_dest(void)
{
int pin, ioapic, irq, irq_entry;
if (skip_ioapic_setup == 1)
return;
for (ioapic = 0; ioapic < nr_ioapics; ioapic++) {
for (pin = 0; pin < nr_ioapic_registers[ioapic]; pin++) {
irq_entry = find_irq_entry(ioapic, pin, mp_INT);
if (irq_entry == -1)
continue;
irq = pin_2_irq(irq_entry, ioapic, pin);
set_ioapic_affinity_irq(irq, TARGET_CPUS);
}
}
}
......@@ -950,6 +950,9 @@ int __devinit __cpu_up(unsigned int cpu)
void __init smp_cpus_done(unsigned int max_cpus)
{
#ifdef CONFIG_X86_IO_APIC
setup_ioapic_dest();
#endif
zap_low_mappings();
}
......@@ -101,6 +101,7 @@ extern void disable_IO_APIC(void);
extern void print_IO_APIC(void);
extern int IO_APIC_get_PCI_irq_vector(int bus, int slot, int fn);
extern void send_IPI(int dest, int vector);
extern void setup_ioapic_dest(void);
extern unsigned long io_apic_irqs;
......
......@@ -110,9 +110,13 @@ static inline int cpu_present_to_apicid(int mps_cpu)
#endif
#define INT_DELIVERY_MODE 1 /* logical delivery */
#define TARGET_CPUS 1
#ifndef ASSEMBLY
#ifdef CONFIG_SMP
#define TARGET_CPUS cpu_online_map
#else
#define TARGET_CPUS cpumask_of_cpu(0)
#endif
static inline unsigned int cpu_mask_to_apicid(cpumask_t cpumask)
{
return cpus_addr(cpumask)[0];
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment