Commit 082ff36b authored by Lorenzo Bianconi's avatar Lorenzo Bianconi Committed by David S. Miller

arm64: dts: mediatek: mt7986: introduce ethernet nodes

Introduce ethernet nodes in mt7986 bindings in order to
enable mt7986a/mt7986b ethernet support.
Co-developed-by: default avatarSam Shih <sam.shih@mediatek.com>
Signed-off-by: default avatarSam Shih <sam.shih@mediatek.com>
Signed-off-by: default avatarLorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent cf0005d2
......@@ -25,6 +25,80 @@ memory@40000000 {
};
};
&eth {
status = "okay";
gmac0: mac@0 {
compatible = "mediatek,eth-mac";
reg = <0>;
phy-mode = "2500base-x";
fixed-link {
speed = <2500>;
full-duplex;
pause;
};
};
mdio: mdio-bus {
#address-cells = <1>;
#size-cells = <0>;
};
};
&mdio {
switch: switch@0 {
compatible = "mediatek,mt7531";
reg = <31>;
reset-gpios = <&pio 5 0>;
};
};
&switch {
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
label = "lan0";
};
port@1 {
reg = <1>;
label = "lan1";
};
port@2 {
reg = <2>;
label = "lan2";
};
port@3 {
reg = <3>;
label = "lan3";
};
port@4 {
reg = <4>;
label = "lan4";
};
port@6 {
reg = <6>;
label = "cpu";
ethernet = <&gmac0>;
phy-mode = "2500base-x";
fixed-link {
speed = <2500>;
full-duplex;
pause;
};
};
};
};
&uart0 {
status = "okay";
};
......
......@@ -222,6 +222,45 @@ ethsys: syscon@15000000 {
#reset-cells = <1>;
};
eth: ethernet@15100000 {
compatible = "mediatek,mt7986-eth";
reg = <0 0x15100000 0 0x80000>;
interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ethsys CLK_ETH_FE_EN>,
<&ethsys CLK_ETH_GP2_EN>,
<&ethsys CLK_ETH_GP1_EN>,
<&ethsys CLK_ETH_WOCPU1_EN>,
<&ethsys CLK_ETH_WOCPU0_EN>,
<&sgmiisys0 CLK_SGMII0_TX250M_EN>,
<&sgmiisys0 CLK_SGMII0_RX250M_EN>,
<&sgmiisys0 CLK_SGMII0_CDR_REF>,
<&sgmiisys0 CLK_SGMII0_CDR_FB>,
<&sgmiisys1 CLK_SGMII1_TX250M_EN>,
<&sgmiisys1 CLK_SGMII1_RX250M_EN>,
<&sgmiisys1 CLK_SGMII1_CDR_REF>,
<&sgmiisys1 CLK_SGMII1_CDR_FB>,
<&topckgen CLK_TOP_NETSYS_SEL>,
<&topckgen CLK_TOP_NETSYS_500M_SEL>;
clock-names = "fe", "gp2", "gp1", "wocpu1", "wocpu0",
"sgmii_tx250m", "sgmii_rx250m",
"sgmii_cdr_ref", "sgmii_cdr_fb",
"sgmii2_tx250m", "sgmii2_rx250m",
"sgmii2_cdr_ref", "sgmii2_cdr_fb",
"netsys0", "netsys1";
assigned-clocks = <&topckgen CLK_TOP_NETSYS_2X_SEL>,
<&topckgen CLK_TOP_SGM_325M_SEL>;
assigned-clock-parents = <&apmixedsys CLK_APMIXED_NET2PLL>,
<&apmixedsys CLK_APMIXED_SGMPLL>;
mediatek,ethsys = <&ethsys>;
mediatek,sgmiisys = <&sgmiisys0>, <&sgmiisys1>;
#reset-cells = <1>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
};
};
......@@ -28,3 +28,73 @@ memory@40000000 {
&uart0 {
status = "okay";
};
&eth {
status = "okay";
gmac0: mac@0 {
compatible = "mediatek,eth-mac";
reg = <0>;
phy-mode = "2500base-x";
fixed-link {
speed = <2500>;
full-duplex;
pause;
};
};
mdio: mdio-bus {
#address-cells = <1>;
#size-cells = <0>;
switch@0 {
compatible = "mediatek,mt7531";
reg = <31>;
reset-gpios = <&pio 5 0>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
label = "lan0";
};
port@1 {
reg = <1>;
label = "lan1";
};
port@2 {
reg = <2>;
label = "lan2";
};
port@3 {
reg = <3>;
label = "lan3";
};
port@4 {
reg = <4>;
label = "lan4";
};
port@6 {
reg = <6>;
label = "cpu";
ethernet = <&gmac0>;
phy-mode = "2500base-x";
fixed-link {
speed = <2500>;
full-duplex;
pause;
};
};
};
};
};
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment