Commit 0875dd59 authored by Stephen Boyd's avatar Stephen Boyd

Merge branch 'clk-stm32f4' into clk-next

* clk-stm32f4:
  clk: stm32f7: Add stm32f7 clock DT bindings for STM32F746 boards
parents f080a493 52af8557
......@@ -10,6 +10,7 @@ Required properties:
- compatible: Should be:
"st,stm32f42xx-rcc"
"st,stm32f469-rcc"
"st,stm32f746-rcc"
- reg: should be register base and length as documented in the
datasheet
- #reset-cells: 1, see below
......@@ -84,6 +85,25 @@ The secondary index is bound with the following magic numbers:
12 CLK_I2SQ_PDIV (post divisor of pll i2s q divisor)
13 CLK_SAIQ_PDIV (post divisor of pll sai q divisor)
14 CLK_HSI (Internal ocscillator clock)
15 CLK_SYSCLK (System Clock)
16 CLK_HDMI_CEC (HDMI-CEC clock)
17 CLK_SPDIF (SPDIF-Rx clock)
18 CLK_USART1 (U(s)arts clocks)
19 CLK_USART2
20 CLK_USART3
21 CLK_UART4
22 CLK_UART5
23 CLK_USART6
24 CLK_UART7
25 CLK_UART8
26 CLK_I2C1 (I2S clocks)
27 CLK_I2C2
28 CLK_I2C3
29 CLK_I2C4
30 CLK_LPTIMER (LPTimer1 clock)
)
Example:
/* Misc clock, FCLK */
......
......@@ -36,4 +36,24 @@
#define END_PRIMARY_CLK 14
#define CLK_HSI 14
#define CLK_SYSCLK 15
#define CLK_HDMI_CEC 16
#define CLK_SPDIF 17
#define CLK_USART1 18
#define CLK_USART2 19
#define CLK_USART3 20
#define CLK_UART4 21
#define CLK_UART5 22
#define CLK_USART6 23
#define CLK_UART7 24
#define CLK_UART8 25
#define CLK_I2C1 26
#define CLK_I2C2 27
#define CLK_I2C3 28
#define CLK_I2C4 29
#define CLK_LPTIMER 30
#define END_PRIMARY_CLK_F7 31
#endif
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment