staging: comedi: amplc_pci230: use comedi_timeout()

Use comedi_timeout() to wait for the analog input end-of-conversion.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/comedi/drivers/amplc_pci230.c

@@ -799,19 +799,29 @@ static void pci230_cancel_ct(struct comedi_device *dev, unsigned int ct)
 	/* Counter ct, 8254 mode 1, initial count not written. */
 }
 
-/*
- *  COMEDI_SUBD_AI instruction;
- */
+static int pci230_ai_eoc(struct comedi_device *dev,
+			 struct comedi_subdevice *s,
+			 struct comedi_insn *insn,
+			 unsigned long context)
+{
+	unsigned int status;
+
+	status = inw(dev->iobase + PCI230_ADCCON);
+	if ((status & PCI230_ADC_FIFO_EMPTY) == 0)
+		return 0;
+	return -EBUSY;
+}
+
 static int pci230_ai_rinsn(struct comedi_device *dev,
 			   struct comedi_subdevice *s, struct comedi_insn *insn,
 			   unsigned int *data)
 {
 	struct pci230_private *devpriv = dev->private;
-	unsigned int n, i;
+	unsigned int n;
 	unsigned int chan, range, aref;
 	unsigned int gainshift;
-	unsigned int status;
 	unsigned short adccon, adcen;
+	int ret;
 
 	/* Unpack channel and range. */
 	chan = CR_CHAN(insn->chanspec);
@@ -883,17 +893,11 @@ static int pci230_ai_rinsn(struct comedi_device *dev,
 		i8254_set_mode(devpriv->iobase1 + PCI230_Z2_CT_BASE, 0, 2,
 			       I8254_MODE1);
 
-#define TIMEOUT 100
 		/* wait for conversion to end */
-		for (i = 0; i < TIMEOUT; i++) {
-			status = inw(dev->iobase + PCI230_ADCCON);
-			if (!(status & PCI230_ADC_FIFO_EMPTY))
-				break;
-			udelay(1);
-		}
-		if (i == TIMEOUT) {
+		ret = comedi_timeout(dev, s, insn, pci230_ai_eoc, 0);
+		if (ret) {
 			dev_err(dev->class_dev, "timeout\n");
-			return -ETIMEDOUT;
+			return ret;
 		}
 
 		/* read data */