powerpc/powernv: Reserve PE#0 on NPU

P8+ hardware reports all errors on PE#0. This patch ensures PE#0 is
not assigned to NPU devices so that it can be used for EEH.
Signed-off-by: Alistair Popple <alistair@popple.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

arch/powerpc/platforms/powernv/pci-ioda.c

@@ -1186,9 +1186,11 @@ static void pnv_pci_ioda_setup_PEs(void)
 		 * functions. PCI bus dependent PEs are required for the
 		 * remaining types of PHBs.
 		 */
-		if (phb->type == PNV_PHB_NPU)
+		if (phb->type == PNV_PHB_NPU) {
+			/* PE#0 is needed for error reporting */
+			pnv_ioda_reserve_pe(phb, 0);
 			pnv_ioda_setup_npu_PEs(hose->bus);
-		else
+		} else
 			pnv_ioda_setup_PEs(hose->bus);
 	}
 }