staging: iio: meter: new driver for ADE7753/6 devices

This also kicks off the new meter subsection.
Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/staging/iio/Kconfig

@@ -49,7 +49,7 @@ source "drivers/staging/iio/gyro/Kconfig"
 source "drivers/staging/iio/imu/Kconfig"
 source "drivers/staging/iio/light/Kconfig"
 source "drivers/staging/iio/magnetometer/Kconfig"
-
+source "drivers/staging/iio/meter/Kconfig"
 source "drivers/staging/iio/trigger/Kconfig"
 
 endif # IIO

drivers/staging/iio/Makefile

@@ -17,5 +17,6 @@ obj-y += dds/
 obj-y += gyro/
 obj-y += imu/
 obj-y += light/
-obj-y += trigger/
 obj-y += magnetometer/
+obj-y += meter/
+obj-y += trigger/

drivers/staging/iio/meter/Kconfig

+#
+# IIO meter drivers configuration
+#
+comment "Active energy metering IC"
+
+config ADE7753
+	tristate "Analog Devices ADE7753/6 Single-Phase Multifunction Metering IC Driver"
+	depends on SPI
+	help
+	  Say yes here to build support for Analog Devices ADE7753 Single-Phase Multifunction
+	  Metering IC with di/dt Sensor Interface.

drivers/staging/iio/meter/Makefile

+#
+# Makefile for metering ic drivers
+#
+
+obj-$(CONFIG_ADE7753) += ade7753.o

drivers/staging/iio/meter/ade7753.h

+#ifndef _ADE7753_H
+#define _ADE7753_H
+
+#define ADE7753_WAVEFORM   0x01
+#define ADE7753_AENERGY    0x02
+#define ADE7753_RAENERGY   0x03
+#define ADE7753_LAENERGY   0x04
+#define ADE7753_VAENERGY   0x05
+#define ADE7753_RVAENERGY  0x06
+#define ADE7753_LVAENERGY  0x07
+#define ADE7753_LVARENERGY 0x08
+#define ADE7753_MODE       0x09
+#define ADE7753_IRQEN      0x0A
+#define ADE7753_STATUS     0x0B
+#define ADE7753_RSTSTATUS  0x0C
+#define ADE7753_CH1OS      0x0D
+#define ADE7753_CH2OS      0x0E
+#define ADE7753_GAIN       0x0F
+#define ADE7753_PHCAL      0x10
+#define ADE7753_APOS       0x11
+#define ADE7753_WGAIN      0x12
+#define ADE7753_WDIV       0x13
+#define ADE7753_CFNUM      0x14
+#define ADE7753_CFDEN      0x15
+#define ADE7753_IRMS       0x16
+#define ADE7753_VRMS       0x17
+#define ADE7753_IRMSOS     0x18
+#define ADE7753_VRMSOS     0x19
+#define ADE7753_VAGAIN     0x1A
+#define ADE7753_VADIV      0x1B
+#define ADE7753_LINECYC    0x1C
+#define ADE7753_ZXTOUT     0x1D
+#define ADE7753_SAGCYC     0x1E
+#define ADE7753_SAGLVL     0x1F
+#define ADE7753_IPKLVL     0x20
+#define ADE7753_VPKLVL     0x21
+#define ADE7753_IPEAK      0x22
+#define ADE7753_RSTIPEAK   0x23
+#define ADE7753_VPEAK      0x24
+#define ADE7753_RSTVPEAK   0x25
+#define ADE7753_TEMP       0x26
+#define ADE7753_PERIOD     0x27
+#define ADE7753_TMODE      0x3D
+#define ADE7753_CHKSUM     0x3E
+#define ADE7753_DIEREV     0x3F
+
+#define ADE7753_READ_REG(a)    a
+#define ADE7753_WRITE_REG(a) ((a) | 0x80)
+
+#define ADE7753_MAX_TX    4
+#define ADE7753_MAX_RX    4
+#define ADE7753_STARTUP_DELAY 1
+
+#define ADE7753_SPI_SLOW	(u32)(300 * 1000)
+#define ADE7753_SPI_BURST	(u32)(1000 * 1000)
+#define ADE7753_SPI_FAST	(u32)(2000 * 1000)
+
+#define DRIVER_NAME		"ade7753"
+
+/**
+ * struct ade7753_state - device instance specific data
+ * @us:			actual spi_device
+ * @work_trigger_to_ring: bh for triggered event handling
+ * @inter:		used to check if new interrupt has been triggered
+ * @last_timestamp:	passing timestamp from th to bh of interrupt handler
+ * @indio_dev:		industrial I/O device structure
+ * @trig:		data ready trigger registered with iio
+ * @tx:			transmit buffer
+ * @rx:			recieve buffer
+ * @buf_lock:		mutex to protect tx and rx
+ **/
+struct ade7753_state {
+	struct spi_device		*us;
+	struct work_struct		work_trigger_to_ring;
+	s64				last_timestamp;
+	struct iio_dev			*indio_dev;
+	struct iio_trigger		*trig;
+	u8				*tx;
+	u8				*rx;
+	struct mutex			buf_lock;
+};
+#if defined(CONFIG_IIO_RING_BUFFER) && defined(THIS_HAS_RING_BUFFER_SUPPORT)
+/* At the moment triggers are only used for ring buffer
+ * filling. This may change!
+ */
+
+enum ade7753_scan {
+	ADE7753_SCAN_ACTIVE_POWER,
+	ADE7753_SCAN_CH1,
+	ADE7753_SCAN_CH2,
+};
+
+void ade7753_remove_trigger(struct iio_dev *indio_dev);
+int ade7753_probe_trigger(struct iio_dev *indio_dev);
+
+ssize_t ade7753_read_data_from_ring(struct device *dev,
+		struct device_attribute *attr,
+		char *buf);
+
+
+int ade7753_configure_ring(struct iio_dev *indio_dev);
+void ade7753_unconfigure_ring(struct iio_dev *indio_dev);
+
+int ade7753_initialize_ring(struct iio_ring_buffer *ring);
+void ade7753_uninitialize_ring(struct iio_ring_buffer *ring);
+#else /* CONFIG_IIO_RING_BUFFER */
+
+static inline void ade7753_remove_trigger(struct iio_dev *indio_dev)
+{
+}
+static inline int ade7753_probe_trigger(struct iio_dev *indio_dev)
+{
+	return 0;
+}
+
+static inline ssize_t
+ade7753_read_data_from_ring(struct device *dev,
+		struct device_attribute *attr,
+		char *buf)
+{
+	return 0;
+}
+
+static int ade7753_configure_ring(struct iio_dev *indio_dev)
+{
+	return 0;
+}
+static inline void ade7753_unconfigure_ring(struct iio_dev *indio_dev)
+{
+}
+static inline int ade7753_initialize_ring(struct iio_ring_buffer *ring)
+{
+	return 0;
+}
+static inline void ade7753_uninitialize_ring(struct iio_ring_buffer *ring)
+{
+}
+#endif /* CONFIG_IIO_RING_BUFFER */
+
+#endif