staging: ti-soc-thermal: rename Kconfig options

This patch renames the Kconfig options to cope with
the new naming convention.

Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
Cc: Benoit <b-cousson@ti.com>
Cc: Nishanth Menon <nm@ti.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/Makefile

@@ -53,7 +53,7 @@ obj-$(CONFIG_ANDROID)		+= android/
 obj-$(CONFIG_USB_WPAN_HCD)	+= ozwpan/
 obj-$(CONFIG_WIMAX_GDM72XX)	+= gdm72xx/
 obj-$(CONFIG_CSR_WIFI)		+= csr/
-obj-$(CONFIG_OMAP_BANDGAP)	+= ti-soc-thermal/
+obj-$(CONFIG_TI_SOC_THERMAL)	+= ti-soc-thermal/
 obj-$(CONFIG_NET_VENDOR_SILICOM)	+= silicom/
 obj-$(CONFIG_CED1401)		+= ced1401/
 obj-$(CONFIG_DRM_IMX)		+= imx-drm/

drivers/staging/ti-soc-thermal/Kconfig

-config OMAP_BANDGAP
-	tristate "Texas Instruments OMAP4+ temperature sensor driver"
+config TI_SOC_THERMAL
+	tristate "Texas Instruments SoCs temperature sensor driver"
 	depends on THERMAL
 	depends on ARCH_HAS_BANDGAP
 	help
@@ -10,9 +10,9 @@ config OMAP_BANDGAP
 	  This includes alert interrupts generation and also the TSHUT
 	  support.
 
-config OMAP_THERMAL
-	bool "Texas Instruments OMAP4+ thermal framework support"
-	depends on OMAP_BANDGAP
+config TI_THERMAL
+	bool "Texas Instruments SoCs thermal framework support"
+	depends on TI_SOC_THERMAL
 	depends on CPU_THERMAL
 	help
 	  If you say yes here you want to get support for generic thermal
@@ -23,7 +23,7 @@ config OMAP_THERMAL
 
 config OMAP4_THERMAL
 	bool "Texas Instruments OMAP4 thermal support"
-	depends on OMAP_BANDGAP
+	depends on TI_SOC_THERMAL
 	depends on ARCH_OMAP4
 	help
 	  If you say yes here you get thermal support for the Texas Instruments
@@ -37,7 +37,7 @@ config OMAP4_THERMAL
 
 config OMAP5_THERMAL
 	bool "Texas Instruments OMAP5 thermal support"
-	depends on OMAP_BANDGAP
+	depends on TI_SOC_THERMAL
 	depends on SOC_OMAP5
 	help
 	  If you say yes here you get thermal support for the Texas Instruments

drivers/staging/ti-soc-thermal/Makefile

-obj-$(CONFIG_OMAP_BANDGAP)		+= ti-soc-thermal.o
+obj-$(CONFIG_TI_SOC_THERMAL)		+= ti-soc-thermal.o
 ti-soc-thermal-y			:= ti-bandgap.o
-ti-soc-thermal-$(CONFIG_OMAP_THERMAL)	+= ti-thermal-common.o
+ti-soc-thermal-$(CONFIG_TI_THERMAL)	+= ti-thermal-common.o
 ti-soc-thermal-$(CONFIG_OMAP4_THERMAL)	+= omap4-thermal-data.o
 ti-soc-thermal-$(CONFIG_OMAP5_THERMAL)	+= omap5-thermal-data.o

drivers/staging/ti-soc-thermal/ti-thermal.h

@@ -20,8 +20,8 @@
  * 02110-1301 USA
  *
  */
-#ifndef __OMAP_THERMAL_H
-#define __OMAP_THERMAL_H
+#ifndef __TI_THERMAL_H
+#define __TI_THERMAL_H
 
 #include "ti-bandgap.h"
 
@@ -73,7 +73,7 @@
 #define omap_thermal_is_valid_trip(trip)				\
 	((trip) >= 0 && (trip) < OMAP_TRIP_NUMBER)
 
-#ifdef CONFIG_OMAP_THERMAL
+#ifdef CONFIG_TI_THERMAL
 int omap_thermal_expose_sensor(struct omap_bandgap *bgp, int id,
 			       char *domain);
 int omap_thermal_remove_sensor(struct omap_bandgap *bgp, int id);