Commit 09d8e315 authored by Felix Fietkau's avatar Felix Fietkau Committed by John W. Linville

ath9k_hw: fix TSF save/restore around chip reset

A cold reset can be triggered because of DMA stop issues, and this leads
to TSF being cleared on all chipsets. To properly deal with this, always
save the TSF.
Additionally, account for the time it takes to do the actual chip reset,
which can be quite significant. On AR9344 it takes around 4.5 ms.
Signed-off-by: default avatarFelix Fietkau <nbd@openwrt.org>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent 10e23181
......@@ -17,6 +17,7 @@
#include <linux/io.h>
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/time.h>
#include <asm/unaligned.h>
#include "hw.h"
......@@ -1855,10 +1856,12 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan,
struct ath9k_hw_cal_data *caldata, bool fastcc)
{
struct ath_common *common = ath9k_hw_common(ah);
struct timespec ts;
u32 saveLedState;
u32 saveDefAntenna;
u32 macStaId1;
u64 tsf = 0;
s64 usec = 0;
int r;
bool start_mci_reset = false;
bool save_fullsleep = ah->chip_fullsleep;
......@@ -1901,10 +1904,10 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan,
macStaId1 = REG_READ(ah, AR_STA_ID1) & AR_STA_ID1_BASE_RATE_11B;
/* For chips on which RTC reset is done, save TSF before it gets cleared */
if (AR_SREV_9100(ah) ||
(AR_SREV_9280(ah) && ah->eep_ops->get_eeprom(ah, EEP_OL_PWRCTRL)))
tsf = ath9k_hw_gettsf64(ah);
/* Save TSF before chip reset, a cold reset clears it */
tsf = ath9k_hw_gettsf64(ah);
getrawmonotonic(&ts);
usec = ts.tv_sec * 1000 + ts.tv_nsec / 1000;
saveLedState = REG_READ(ah, AR_CFG_LED) &
(AR_CFG_LED_ASSOC_CTL | AR_CFG_LED_MODE_SEL |
......@@ -1937,8 +1940,9 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan,
}
/* Restore TSF */
if (tsf)
ath9k_hw_settsf64(ah, tsf);
getrawmonotonic(&ts);
usec = ts.tv_sec * 1000 + ts.tv_nsec / 1000 - usec;
ath9k_hw_settsf64(ah, tsf + usec);
if (AR_SREV_9280_20_OR_LATER(ah))
REG_SET_BIT(ah, AR_GPIO_INPUT_EN_VAL, AR_GPIO_JTAG_DISABLE);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment