media: mt9p031: Use BIT macro

Make use of the BIT macro for setting individual bits. This improves
readability and safety with respect to shifts.

When on it also remove two zero value disable defines.
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

drivers/media/i2c/mt9p031.c

@@ -76,40 +76,38 @@
 #define	MT9P031_PLL_CONFIG_1				0x11
 #define	MT9P031_PLL_CONFIG_2				0x12
 #define MT9P031_PIXEL_CLOCK_CONTROL			0x0a
-#define		MT9P031_PIXEL_CLOCK_INVERT		(1 << 15)
+#define		MT9P031_PIXEL_CLOCK_INVERT		BIT(15)
 #define		MT9P031_PIXEL_CLOCK_SHIFT(n)		((n) << 8)
 #define		MT9P031_PIXEL_CLOCK_DIVIDE(n)		((n) << 0)
 #define MT9P031_RESTART					0x0b
-#define		MT9P031_FRAME_PAUSE_RESTART		(1 << 1)
-#define		MT9P031_FRAME_RESTART			(1 << 0)
+#define		MT9P031_FRAME_PAUSE_RESTART		BIT(1)
+#define		MT9P031_FRAME_RESTART			BIT(0)
 #define MT9P031_SHUTTER_DELAY				0x0c
 #define MT9P031_RST					0x0d
-#define		MT9P031_RST_ENABLE			1
-#define		MT9P031_RST_DISABLE			0
+#define		MT9P031_RST_ENABLE			BIT(0)
 #define MT9P031_READ_MODE_1				0x1e
 #define MT9P031_READ_MODE_2				0x20
-#define		MT9P031_READ_MODE_2_ROW_MIR		(1 << 15)
-#define		MT9P031_READ_MODE_2_COL_MIR		(1 << 14)
-#define		MT9P031_READ_MODE_2_ROW_BLC		(1 << 6)
+#define		MT9P031_READ_MODE_2_ROW_MIR		BIT(15)
+#define		MT9P031_READ_MODE_2_COL_MIR		BIT(14)
+#define		MT9P031_READ_MODE_2_ROW_BLC		BIT(6)
 #define MT9P031_ROW_ADDRESS_MODE			0x22
 #define MT9P031_COLUMN_ADDRESS_MODE			0x23
 #define MT9P031_GLOBAL_GAIN				0x35
 #define		MT9P031_GLOBAL_GAIN_MIN			8
 #define		MT9P031_GLOBAL_GAIN_MAX			1024
 #define		MT9P031_GLOBAL_GAIN_DEF			8
-#define		MT9P031_GLOBAL_GAIN_MULT		(1 << 6)
+#define		MT9P031_GLOBAL_GAIN_MULT		BIT(6)
 #define MT9P031_ROW_BLACK_TARGET			0x49
 #define MT9P031_ROW_BLACK_DEF_OFFSET			0x4b
 #define MT9P031_GREEN1_OFFSET				0x60
 #define MT9P031_GREEN2_OFFSET				0x61
 #define MT9P031_BLACK_LEVEL_CALIBRATION			0x62
-#define		MT9P031_BLC_MANUAL_BLC			(1 << 0)
+#define		MT9P031_BLC_MANUAL_BLC			BIT(0)
 #define MT9P031_RED_OFFSET				0x63
 #define MT9P031_BLUE_OFFSET				0x64
 #define MT9P031_TEST_PATTERN				0xa0
 #define		MT9P031_TEST_PATTERN_SHIFT		3
-#define		MT9P031_TEST_PATTERN_ENABLE		(1 << 0)
-#define		MT9P031_TEST_PATTERN_DISABLE		(0 << 0)
+#define		MT9P031_TEST_PATTERN_ENABLE		BIT(0)
 #define MT9P031_TEST_PATTERN_GREEN			0xa1
 #define MT9P031_TEST_PATTERN_RED			0xa2
 #define MT9P031_TEST_PATTERN_BLUE			0xa3
@@ -199,7 +197,7 @@ static int mt9p031_reset(struct mt9p031 *mt9p031)
 	ret = mt9p031_write(client, MT9P031_RST, MT9P031_RST_ENABLE);
 	if (ret < 0)
 		return ret;
-	ret = mt9p031_write(client, MT9P031_RST, MT9P031_RST_DISABLE);
+	ret = mt9p031_write(client, MT9P031_RST, 0);
 	if (ret < 0)
 		return ret;
 
@@ -794,8 +792,7 @@ static int mt9p031_s_ctrl(struct v4l2_ctrl *ctrl)
 			if (ret < 0)
 				return ret;
 
-			return mt9p031_write(client, MT9P031_TEST_PATTERN,
-					     MT9P031_TEST_PATTERN_DISABLE);
+			return mt9p031_write(client, MT9P031_TEST_PATTERN, 0);
 		}
 
 		ret = mt9p031_write(client, MT9P031_TEST_PATTERN_GREEN, 0x05a0);