Skip to content

L
linux
Commit 0a276d16 authored by Linus Torvalds's avatar Linus Torvalds
Browse files
Options

Merge tag 'sh-for-linus' of git://github.com/pmundt/linux-sh 

Pull SuperH fixes from Paul Mundt.

* tag 'sh-for-linus' of git://github.com/pmundt/linux-sh: (24 commits)
  sh: explicitly include sh_dma.h in setup-sh7722.c
  sh: ecovec: care CN5 VBUS if USB host mode
  sh: sh7724: fixup renesas_usbhs clock settings
  sh: intc: initial irqdomain support.
  sh: pfc: Fix up init ordering mess.
  serial: sh-sci: fix compilation breakage, when DMA is enabled
  dmaengine: shdma: restore partial transfer calculation
  sh: modify the sh_dmae_slave_config for RSPI in setup-sh7757
  sh: Fix up recursive fault in oops with unset TTB.
  sh: pfc: Build fix for pinctrl_remove_gpio_range() changes.
  sh: select the fixed regulator driver on several boards
  sh: ecovec: switch MMC power control to regulators
  sh: add fixed voltage regulators to se7724
  sh: add fixed voltage regulators to sdk7786
  sh: add fixed voltage regulators to rsk
  sh: add fixed voltage regulators to migor
  sh: add fixed voltage regulators to kfr2r09
  sh: add fixed voltage regulators to ap325rxa
  sh: add fixed voltage regulators to sh7757lcr
  sh: add fixed voltage regulators to sh2007
  ...
parents 25aa6a7a 08298f06
Hide whitespace changes
Inline Side-by-side
Showing with 419 additions and 47 deletions
arch/sh/boards/Kconfig
View file @ 0a276d16
...@@ -57,6 +57,7 @@ config SH_7724_SOLUTION_ENGINE ...@@ -57,6 +57,7 @@ config SH_7724_SOLUTION_ENGINE
depends on CPU_SUBTYPE_SH7724 depends on CPU_SUBTYPE_SH7724
select ARCH_REQUIRE_GPIOLIB select ARCH_REQUIRE_GPIOLIB
select SND_SOC_AK4642 if SND_SIMPLE_CARD select SND_SOC_AK4642 if SND_SIMPLE_CARD
select REGULATOR_FIXED_VOLTAGE if REGULATOR
help help
Select 7724 SolutionEngine if configuring for a Hitachi SH7724 Select 7724 SolutionEngine if configuring for a Hitachi SH7724
evaluation board. evaluation board.
...@@ -140,6 +141,7 @@ config SH_RSK ...@@ -140,6 +141,7 @@ config SH_RSK
bool "Renesas Starter Kit" bool "Renesas Starter Kit"
depends on CPU_SUBTYPE_SH7201 || CPU_SUBTYPE_SH7203 || \ depends on CPU_SUBTYPE_SH7201 || CPU_SUBTYPE_SH7203 || \
CPU_SUBTYPE_SH7264 || CPU_SUBTYPE_SH7269 CPU_SUBTYPE_SH7264 || CPU_SUBTYPE_SH7269
select REGULATOR_FIXED_VOLTAGE if REGULATOR
help help
Select this option if configuring for any of the RSK+ MCU Select this option if configuring for any of the RSK+ MCU
evaluation platforms. evaluation platforms.
...@@ -159,6 +161,7 @@ config SH_SDK7786 ...@@ -159,6 +161,7 @@ config SH_SDK7786
select NO_IOPORT if !PCI select NO_IOPORT if !PCI
select ARCH_WANT_OPTIONAL_GPIOLIB select ARCH_WANT_OPTIONAL_GPIOLIB
select HAVE_SRAM_POOL select HAVE_SRAM_POOL
select REGULATOR_FIXED_VOLTAGE if REGULATOR
help help
Select SDK7786 if configuring for a Renesas Technology Europe Select SDK7786 if configuring for a Renesas Technology Europe
SH7786-65nm board. SH7786-65nm board.
...@@ -173,6 +176,7 @@ config SH_SH7757LCR ...@@ -173,6 +176,7 @@ config SH_SH7757LCR
bool "SH7757LCR" bool "SH7757LCR"
depends on CPU_SUBTYPE_SH7757 depends on CPU_SUBTYPE_SH7757
select ARCH_REQUIRE_GPIOLIB select ARCH_REQUIRE_GPIOLIB
select REGULATOR_FIXED_VOLTAGE if REGULATOR
config SH_SH7785LCR config SH_SH7785LCR
bool "SH7785LCR" bool "SH7785LCR"
...@@ -206,6 +210,7 @@ config SH_MIGOR ...@@ -206,6 +210,7 @@ config SH_MIGOR
bool "Migo-R" bool "Migo-R"
depends on CPU_SUBTYPE_SH7722 depends on CPU_SUBTYPE_SH7722
select ARCH_REQUIRE_GPIOLIB select ARCH_REQUIRE_GPIOLIB
select REGULATOR_FIXED_VOLTAGE if REGULATOR
help help
Select Migo-R if configuring for the SH7722 Migo-R platform Select Migo-R if configuring for the SH7722 Migo-R platform
by Renesas System Solutions Asia Pte. Ltd. by Renesas System Solutions Asia Pte. Ltd.
...@@ -214,6 +219,7 @@ config SH_AP325RXA ...@@ -214,6 +219,7 @@ config SH_AP325RXA
bool "AP-325RXA" bool "AP-325RXA"
depends on CPU_SUBTYPE_SH7723 depends on CPU_SUBTYPE_SH7723
select ARCH_REQUIRE_GPIOLIB select ARCH_REQUIRE_GPIOLIB
select REGULATOR_FIXED_VOLTAGE if REGULATOR
help help
Renesas "AP-325RXA" support. Renesas "AP-325RXA" support.
Compatible with ALGO SYSTEM CO.,LTD. "AP-320A" Compatible with ALGO SYSTEM CO.,LTD. "AP-320A"
...@@ -222,6 +228,7 @@ config SH_KFR2R09 ...@@ -222,6 +228,7 @@ config SH_KFR2R09
bool "KFR2R09" bool "KFR2R09"
depends on CPU_SUBTYPE_SH7724 depends on CPU_SUBTYPE_SH7724
select ARCH_REQUIRE_GPIOLIB select ARCH_REQUIRE_GPIOLIB
select REGULATOR_FIXED_VOLTAGE if REGULATOR
help help
"Kit For R2R for 2009" support. "Kit For R2R for 2009" support.
...@@ -230,6 +237,7 @@ config SH_ECOVEC ...@@ -230,6 +237,7 @@ config SH_ECOVEC
depends on CPU_SUBTYPE_SH7724 depends on CPU_SUBTYPE_SH7724
select ARCH_REQUIRE_GPIOLIB select ARCH_REQUIRE_GPIOLIB
select SND_SOC_DA7210 if SND_SIMPLE_CARD select SND_SOC_DA7210 if SND_SIMPLE_CARD
select REGULATOR_FIXED_VOLTAGE if REGULATOR
help help
Renesas "R0P7724LC0011/21RL (EcoVec)" support. Renesas "R0P7724LC0011/21RL (EcoVec)" support.
...@@ -305,6 +313,7 @@ config SH_MAGIC_PANEL_R2 ...@@ -305,6 +313,7 @@ config SH_MAGIC_PANEL_R2
bool "Magic Panel R2" bool "Magic Panel R2"
depends on CPU_SUBTYPE_SH7720 depends on CPU_SUBTYPE_SH7720
select ARCH_REQUIRE_GPIOLIB select ARCH_REQUIRE_GPIOLIB
select REGULATOR_FIXED_VOLTAGE if REGULATOR
help help
Select Magic Panel R2 if configuring for Magic Panel R2. Select Magic Panel R2 if configuring for Magic Panel R2.
...@@ -316,6 +325,7 @@ config SH_CAYMAN ...@@ -316,6 +325,7 @@ config SH_CAYMAN
config SH_POLARIS config SH_POLARIS
bool "SMSC Polaris" bool "SMSC Polaris"
select CPU_HAS_IPR_IRQ select CPU_HAS_IPR_IRQ
select REGULATOR_FIXED_VOLTAGE if REGULATOR
depends on CPU_SUBTYPE_SH7709 depends on CPU_SUBTYPE_SH7709
help help
Select if configuring for an SMSC Polaris development board Select if configuring for an SMSC Polaris development board
...@@ -323,6 +333,7 @@ config SH_POLARIS ...@@ -323,6 +333,7 @@ config SH_POLARIS
config SH_SH2007 config SH_SH2007
bool "SH-2007 board" bool "SH-2007 board"
select NO_IOPORT select NO_IOPORT
select REGULATOR_FIXED_VOLTAGE if REGULATOR
depends on CPU_SUBTYPE_SH7780 depends on CPU_SUBTYPE_SH7780
help help
SH-2007 is a single-board computer based around SH7780 chip SH-2007 is a single-board computer based around SH7780 chip
...@@ -334,6 +345,7 @@ config SH_SH2007 ...@@ -334,6 +345,7 @@ config SH_SH2007
config SH_APSH4A3A config SH_APSH4A3A
bool "AP-SH4A-3A" bool "AP-SH4A-3A"
select SH_ALPHA_BOARD select SH_ALPHA_BOARD
select REGULATOR_FIXED_VOLTAGE if REGULATOR
depends on CPU_SUBTYPE_SH7785 depends on CPU_SUBTYPE_SH7785
help help
Select AP-SH4A-3A if configuring for an ALPHAPROJECT AP-SH4A-3A. Select AP-SH4A-3A if configuring for an ALPHAPROJECT AP-SH4A-3A.
...@@ -342,6 +354,7 @@ config SH_APSH4AD0A ...@@ -342,6 +354,7 @@ config SH_APSH4AD0A
bool "AP-SH4AD-0A" bool "AP-SH4AD-0A"
select SH_ALPHA_BOARD select SH_ALPHA_BOARD
select SYS_SUPPORTS_PCI select SYS_SUPPORTS_PCI
select REGULATOR_FIXED_VOLTAGE if REGULATOR
depends on CPU_SUBTYPE_SH7786 depends on CPU_SUBTYPE_SH7786
help help
Select AP-SH4AD-0A if configuring for an ALPHAPROJECT AP-SH4AD-0A. Select AP-SH4AD-0A if configuring for an ALPHAPROJECT AP-SH4AD-0A.
......
arch/sh/boards/board-apsh4a3a.c
View file @ 0a276d16
...@@ -13,6 +13,8 @@ ...@@ -13,6 +13,8 @@
#include <linux/platform_device.h> #include <linux/platform_device.h>
#include <linux/io.h> #include <linux/io.h>
#include <linux/mtd/physmap.h> #include <linux/mtd/physmap.h>
#include <linux/regulator/fixed.h>
#include <linux/regulator/machine.h>
#include <linux/smsc911x.h> #include <linux/smsc911x.h>
#include <linux/irq.h> #include <linux/irq.h>
#include <linux/clk.h> #include <linux/clk.h>
...@@ -66,6 +68,12 @@ static struct platform_device nor_flash_device = { ...@@ -66,6 +68,12 @@ static struct platform_device nor_flash_device = {
.resource = nor_flash_resources, .resource = nor_flash_resources,
}; };
/* Dummy supplies, where voltage doesn't matter */
static struct regulator_consumer_supply dummy_supplies[] = {
REGULATOR_SUPPLY("vddvario", "smsc911x"),
REGULATOR_SUPPLY("vdd33a", "smsc911x"),
};
static struct resource smsc911x_resources[] = { static struct resource smsc911x_resources[] = {
[0] = { [0] = {
.name = "smsc911x-memory", .name = "smsc911x-memory",
...@@ -105,6 +113,8 @@ static struct platform_device *apsh4a3a_devices[] __initdata = { ...@@ -105,6 +113,8 @@ static struct platform_device *apsh4a3a_devices[] __initdata = {
static int __init apsh4a3a_devices_setup(void) static int __init apsh4a3a_devices_setup(void)
{ {
regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
return platform_add_devices(apsh4a3a_devices, return platform_add_devices(apsh4a3a_devices,
ARRAY_SIZE(apsh4a3a_devices)); ARRAY_SIZE(apsh4a3a_devices));
} }
......
arch/sh/boards/board-apsh4ad0a.c
View file @ 0a276d16
...@@ -12,12 +12,20 @@ ...@@ -12,12 +12,20 @@
#include <linux/init.h> #include <linux/init.h>
#include <linux/platform_device.h> #include <linux/platform_device.h>
#include <linux/io.h> #include <linux/io.h>
#include <linux/regulator/fixed.h>
#include <linux/regulator/machine.h>
#include <linux/smsc911x.h> #include <linux/smsc911x.h>
#include <linux/irq.h> #include <linux/irq.h>
#include <linux/clk.h> #include <linux/clk.h>
#include <asm/machvec.h> #include <asm/machvec.h>
#include <asm/sizes.h> #include <asm/sizes.h>
/* Dummy supplies, where voltage doesn't matter */
static struct regulator_consumer_supply dummy_supplies[] = {
REGULATOR_SUPPLY("vddvario", "smsc911x"),
REGULATOR_SUPPLY("vdd33a", "smsc911x"),
};
static struct resource smsc911x_resources[] = { static struct resource smsc911x_resources[] = {
[0] = { [0] = {
.name = "smsc911x-memory", .name = "smsc911x-memory",
...@@ -56,6 +64,8 @@ static struct platform_device *apsh4ad0a_devices[] __initdata = { ...@@ -56,6 +64,8 @@ static struct platform_device *apsh4ad0a_devices[] __initdata = {
static int __init apsh4ad0a_devices_setup(void) static int __init apsh4ad0a_devices_setup(void)
{ {
regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
return platform_add_devices(apsh4ad0a_devices, return platform_add_devices(apsh4ad0a_devices,
ARRAY_SIZE(apsh4ad0a_devices)); ARRAY_SIZE(apsh4ad0a_devices));
} }
......
arch/sh/boards/board-magicpanelr2.c
View file @ 0a276d16
...@@ -14,6 +14,8 @@ ...@@ -14,6 +14,8 @@
#include <linux/platform_device.h> #include <linux/platform_device.h>
#include <linux/delay.h> #include <linux/delay.h>
#include <linux/gpio.h> #include <linux/gpio.h>
#include <linux/regulator/fixed.h>
#include <linux/regulator/machine.h>
#include <linux/smsc911x.h> #include <linux/smsc911x.h>
#include <linux/mtd/mtd.h> #include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h> #include <linux/mtd/partitions.h>
...@@ -24,6 +26,12 @@ ...@@ -24,6 +26,12 @@
#include <asm/heartbeat.h> #include <asm/heartbeat.h>
#include <cpu/sh7720.h> #include <cpu/sh7720.h>
/* Dummy supplies, where voltage doesn't matter */
static struct regulator_consumer_supply dummy_supplies[] = {
REGULATOR_SUPPLY("vddvario", "smsc911x"),
REGULATOR_SUPPLY("vdd33a", "smsc911x"),
};
#define LAN9115_READY (__raw_readl(0xA8000084UL) & 0x00000001UL) #define LAN9115_READY (__raw_readl(0xA8000084UL) & 0x00000001UL)
/* Wait until reset finished. Timeout is 100ms. */ /* Wait until reset finished. Timeout is 100ms. */
...@@ -348,6 +356,8 @@ static struct platform_device *mpr2_devices[] __initdata = { ...@@ -348,6 +356,8 @@ static struct platform_device *mpr2_devices[] __initdata = {
static int __init mpr2_devices_setup(void) static int __init mpr2_devices_setup(void)
{ {
regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
return platform_add_devices(mpr2_devices, ARRAY_SIZE(mpr2_devices)); return platform_add_devices(mpr2_devices, ARRAY_SIZE(mpr2_devices));
} }
device_initcall(mpr2_devices_setup); device_initcall(mpr2_devices_setup);
......
arch/sh/boards/board-polaris.c
View file @ 0a276d16
...@@ -9,6 +9,8 @@ ...@@ -9,6 +9,8 @@
#include <linux/interrupt.h> #include <linux/interrupt.h>
#include <linux/irq.h> #include <linux/irq.h>
#include <linux/platform_device.h> #include <linux/platform_device.h>
#include <linux/regulator/fixed.h>
#include <linux/regulator/machine.h>
#include <linux/smsc911x.h> #include <linux/smsc911x.h>
#include <linux/io.h> #include <linux/io.h>
#include <asm/irq.h> #include <asm/irq.h>
...@@ -22,6 +24,12 @@ ...@@ -22,6 +24,12 @@
#define AREA5_WAIT_CTRL (0x1C00) #define AREA5_WAIT_CTRL (0x1C00)
#define WAIT_STATES_10 (0x7) #define WAIT_STATES_10 (0x7)
/* Dummy supplies, where voltage doesn't matter */
static struct regulator_consumer_supply dummy_supplies[] = {
REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
};
static struct resource smsc911x_resources[] = { static struct resource smsc911x_resources[] = {
[0] = { [0] = {
.name = "smsc911x-memory", .name = "smsc911x-memory",
...@@ -88,6 +96,8 @@ static int __init polaris_initialise(void) ...@@ -88,6 +96,8 @@ static int __init polaris_initialise(void)
printk(KERN_INFO "Configuring Polaris external bus\n"); printk(KERN_INFO "Configuring Polaris external bus\n");
regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
/* Configure area 5 with 2 wait states */ /* Configure area 5 with 2 wait states */
wcr = __raw_readw(WCR2); wcr = __raw_readw(WCR2);
wcr &= (~AREA5_WAIT_CTRL); wcr &= (~AREA5_WAIT_CTRL);
......
arch/sh/boards/board-sh2007.c
View file @ 0a276d16
...@@ -6,6 +6,8 @@ ...@@ -6,6 +6,8 @@
*/ */
#include <linux/init.h> #include <linux/init.h>
#include <linux/irq.h> #include <linux/irq.h>
#include <linux/regulator/fixed.h>
#include <linux/regulator/machine.h>
#include <linux/smsc911x.h> #include <linux/smsc911x.h>
#include <linux/platform_device.h> #include <linux/platform_device.h>
#include <linux/ata_platform.h> #include <linux/ata_platform.h>
...@@ -13,6 +15,14 @@ ...@@ -13,6 +15,14 @@
#include <asm/machvec.h> #include <asm/machvec.h>
#include <mach/sh2007.h> #include <mach/sh2007.h>
/* Dummy supplies, where voltage doesn't matter */
static struct regulator_consumer_supply dummy_supplies[] = {
REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
REGULATOR_SUPPLY("vddvario", "smsc911x.1"),
REGULATOR_SUPPLY("vdd33a", "smsc911x.1"),
};
struct smsc911x_platform_config smc911x_info = { struct smsc911x_platform_config smc911x_info = {
.flags = SMSC911X_USE_32BIT, .flags = SMSC911X_USE_32BIT,
.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
...@@ -98,6 +108,8 @@ static struct platform_device *sh2007_devices[] __initdata = { ...@@ -98,6 +108,8 @@ static struct platform_device *sh2007_devices[] __initdata = {
static int __init sh2007_io_init(void) static int __init sh2007_io_init(void)
{ {
regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
platform_add_devices(sh2007_devices, ARRAY_SIZE(sh2007_devices)); platform_add_devices(sh2007_devices, ARRAY_SIZE(sh2007_devices));
return 0; return 0;
} }
......
arch/sh/boards/board-sh7757lcr.c
View file @ 0a276d16
...@@ -12,6 +12,8 @@ ...@@ -12,6 +12,8 @@
#include <linux/platform_device.h> #include <linux/platform_device.h>
#include <linux/gpio.h> #include <linux/gpio.h>
#include <linux/irq.h> #include <linux/irq.h>
#include <linux/regulator/fixed.h>
#include <linux/regulator/machine.h>
#include <linux/spi/spi.h> #include <linux/spi/spi.h>
#include <linux/spi/flash.h> #include <linux/spi/flash.h>
#include <linux/io.h> #include <linux/io.h>
...@@ -199,6 +201,15 @@ static struct platform_device sh7757_eth_giga1_device = { ...@@ -199,6 +201,15 @@ static struct platform_device sh7757_eth_giga1_device = {
}, },
}; };
/* Fixed 3.3V regulator to be used by SDHI0, MMCIF */
static struct regulator_consumer_supply fixed3v3_power_consumers[] =
{
REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
REGULATOR_SUPPLY("vmmc", "sh_mmcif.0"),
REGULATOR_SUPPLY("vqmmc", "sh_mmcif.0"),
};
/* SH_MMCIF */ /* SH_MMCIF */
static struct resource sh_mmcif_resources[] = { static struct resource sh_mmcif_resources[] = {
[0] = { [0] = {
...@@ -329,6 +340,9 @@ static struct spi_board_info spi_board_info[] = { ...@@ -329,6 +340,9 @@ static struct spi_board_info spi_board_info[] = {
static int __init sh7757lcr_devices_setup(void) static int __init sh7757lcr_devices_setup(void)
{ {
regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers,
ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
/* RGMII (PTA) */ /* RGMII (PTA) */
gpio_request(GPIO_FN_ET0_MDC, NULL); gpio_request(GPIO_FN_ET0_MDC, NULL);
gpio_request(GPIO_FN_ET0_MDIO, NULL); gpio_request(GPIO_FN_ET0_MDIO, NULL);
......
arch/sh/boards/mach-ap325rxa/setup.c
View file @ 0a276d16
...@@ -20,6 +20,8 @@ ...@@ -20,6 +20,8 @@
#include <linux/mtd/sh_flctl.h> #include <linux/mtd/sh_flctl.h>
#include <linux/delay.h> #include <linux/delay.h>
#include <linux/i2c.h> #include <linux/i2c.h>
#include <linux/regulator/fixed.h>
#include <linux/regulator/machine.h>
#include <linux/smsc911x.h> #include <linux/smsc911x.h>
#include <linux/gpio.h> #include <linux/gpio.h>
#include <linux/videodev2.h> #include <linux/videodev2.h>
...@@ -34,6 +36,12 @@ ...@@ -34,6 +36,12 @@
#include <asm/suspend.h> #include <asm/suspend.h>
#include <cpu/sh7723.h> #include <cpu/sh7723.h>
/* Dummy supplies, where voltage doesn't matter */
static struct regulator_consumer_supply dummy_supplies[] = {
REGULATOR_SUPPLY("vddvario", "smsc911x"),
REGULATOR_SUPPLY("vdd33a", "smsc911x"),
};
static struct smsc911x_platform_config smsc911x_config = { static struct smsc911x_platform_config smsc911x_config = {
.phy_interface = PHY_INTERFACE_MODE_MII, .phy_interface = PHY_INTERFACE_MODE_MII,
.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
...@@ -423,6 +431,15 @@ static struct platform_device ceu_device = { ...@@ -423,6 +431,15 @@ static struct platform_device ceu_device = {
}, },
}; };
/* Fixed 3.3V regulators to be used by SDHI0, SDHI1 */
static struct regulator_consumer_supply fixed3v3_power_consumers[] =
{
REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"),
REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"),
};
static struct resource sdhi0_cn3_resources[] = { static struct resource sdhi0_cn3_resources[] = {
[0] = { [0] = {
.name = "SDHI0", .name = "SDHI0",
...@@ -544,6 +561,10 @@ static int __init ap325rxa_devices_setup(void) ...@@ -544,6 +561,10 @@ static int __init ap325rxa_devices_setup(void)
&ap325rxa_sdram_leave_start, &ap325rxa_sdram_leave_start,
&ap325rxa_sdram_leave_end); &ap325rxa_sdram_leave_end);
regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers,
ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
regulator_register_fixed(1, dummy_supplies, ARRAY_SIZE(dummy_supplies));
/* LD3 and LD4 LEDs */ /* LD3 and LD4 LEDs */
gpio_request(GPIO_PTX5, NULL); /* RUN */ gpio_request(GPIO_PTX5, NULL); /* RUN */
gpio_direction_output(GPIO_PTX5, 1); gpio_direction_output(GPIO_PTX5, 1);
......
arch/sh/boards/mach-ecovec24/setup.c
View file @ 0a276d16
...@@ -19,6 +19,8 @@ ...@@ -19,6 +19,8 @@
#include <linux/interrupt.h> #include <linux/interrupt.h>
#include <linux/io.h> #include <linux/io.h>
#include <linux/delay.h> #include <linux/delay.h>
#include <linux/regulator/fixed.h>
#include <linux/regulator/machine.h>
#include <linux/usb/r8a66597.h> #include <linux/usb/r8a66597.h>
#include <linux/usb/renesas_usbhs.h> #include <linux/usb/renesas_usbhs.h>
#include <linux/i2c.h> #include <linux/i2c.h>
...@@ -242,9 +244,17 @@ static int usbhs_get_id(struct platform_device *pdev) ...@@ -242,9 +244,17 @@ static int usbhs_get_id(struct platform_device *pdev)
return gpio_get_value(GPIO_PTB3); return gpio_get_value(GPIO_PTB3);
} }
static void usbhs_phy_reset(struct platform_device *pdev)
{
/* enable vbus if HOST */
if (!gpio_get_value(GPIO_PTB3))
gpio_set_value(GPIO_PTB5, 1);
}
static struct renesas_usbhs_platform_info usbhs_info = { static struct renesas_usbhs_platform_info usbhs_info = {
.platform_callback = { .platform_callback = {
.get_id = usbhs_get_id, .get_id = usbhs_get_id,
.phy_reset = usbhs_phy_reset,
}, },
.driver_param = { .driver_param = {
.buswait_bwait = 4, .buswait_bwait = 4,
...@@ -518,10 +528,86 @@ static struct i2c_board_info ts_i2c_clients = { ...@@ -518,10 +528,86 @@ static struct i2c_board_info ts_i2c_clients = {
.irq = IRQ0, .irq = IRQ0,
}; };
static struct regulator_consumer_supply cn12_power_consumers[] =
{
REGULATOR_SUPPLY("vmmc", "sh_mmcif.0"),
REGULATOR_SUPPLY("vqmmc", "sh_mmcif.0"),
REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"),
REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"),
};
static struct regulator_init_data cn12_power_init_data = {
.constraints = {
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = ARRAY_SIZE(cn12_power_consumers),
.consumer_supplies = cn12_power_consumers,
};
static struct fixed_voltage_config cn12_power_info = {
.supply_name = "CN12 SD/MMC Vdd",
.microvolts = 3300000,
.gpio = GPIO_PTB7,
.enable_high = 1,
.init_data = &cn12_power_init_data,
};
static struct platform_device cn12_power = {
.name = "reg-fixed-voltage",
.id = 0,
.dev = {
.platform_data = &cn12_power_info,
},
};
#if defined(CONFIG_MMC_SDHI) || defined(CONFIG_MMC_SDHI_MODULE) #if defined(CONFIG_MMC_SDHI) || defined(CONFIG_MMC_SDHI_MODULE)
/* SDHI0 */ /* SDHI0 */
static struct regulator_consumer_supply sdhi0_power_consumers[] =
{
REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
};
static struct regulator_init_data sdhi0_power_init_data = {
.constraints = {
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = ARRAY_SIZE(sdhi0_power_consumers),
.consumer_supplies = sdhi0_power_consumers,
};
static struct fixed_voltage_config sdhi0_power_info = {
.supply_name = "CN11 SD/MMC Vdd",
.microvolts = 3300000,
.gpio = GPIO_PTB6,
.enable_high = 1,
.init_data = &sdhi0_power_init_data,
};
static struct platform_device sdhi0_power = {
.name = "reg-fixed-voltage",
.id = 1,
.dev = {
.platform_data = &sdhi0_power_info,
},
};
static void sdhi0_set_pwr(struct platform_device *pdev, int state) static void sdhi0_set_pwr(struct platform_device *pdev, int state)
{ {
static int power_gpio = -EINVAL;
if (power_gpio < 0) {
int ret = gpio_request(GPIO_PTB6, NULL);
if (!ret) {
power_gpio = GPIO_PTB6;
gpio_direction_output(power_gpio, 0);
}
}
/*
* Toggle the GPIO regardless, whether we managed to grab it above or
* the fixed regulator driver did.
*/
gpio_set_value(GPIO_PTB6, state); gpio_set_value(GPIO_PTB6, state);
} }
...@@ -562,13 +648,27 @@ static struct platform_device sdhi0_device = { ...@@ -562,13 +648,27 @@ static struct platform_device sdhi0_device = {
}, },
}; };
#if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE) static void cn12_set_pwr(struct platform_device *pdev, int state)
/* SDHI1 */
static void sdhi1_set_pwr(struct platform_device *pdev, int state)
{ {
static int power_gpio = -EINVAL;
if (power_gpio < 0) {
int ret = gpio_request(GPIO_PTB7, NULL);
if (!ret) {
power_gpio = GPIO_PTB7;
gpio_direction_output(power_gpio, 0);
}
}
/*
* Toggle the GPIO regardless, whether we managed to grab it above or
* the fixed regulator driver did.
*/
gpio_set_value(GPIO_PTB7, state); gpio_set_value(GPIO_PTB7, state);
} }
#if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE)
/* SDHI1 */
static int sdhi1_get_cd(struct platform_device *pdev) static int sdhi1_get_cd(struct platform_device *pdev)
{ {
return !gpio_get_value(GPIO_PTW7); return !gpio_get_value(GPIO_PTW7);
...@@ -579,7 +679,7 @@ static struct sh_mobile_sdhi_info sdhi1_info = { ...@@ -579,7 +679,7 @@ static struct sh_mobile_sdhi_info sdhi1_info = {
.dma_slave_rx = SHDMA_SLAVE_SDHI1_RX, .dma_slave_rx = SHDMA_SLAVE_SDHI1_RX,
.tmio_caps = MMC_CAP_SDIO_IRQ | MMC_CAP_POWER_OFF_CARD | .tmio_caps = MMC_CAP_SDIO_IRQ | MMC_CAP_POWER_OFF_CARD |
MMC_CAP_NEEDS_POLL, MMC_CAP_NEEDS_POLL,
.set_pwr = sdhi1_set_pwr, .set_pwr = cn12_set_pwr,
.get_cd = sdhi1_get_cd, .get_cd = sdhi1_get_cd,
}; };
...@@ -899,14 +999,9 @@ static struct platform_device vou_device = { ...@@ -899,14 +999,9 @@ static struct platform_device vou_device = {
#if defined(CONFIG_MMC_SH_MMCIF) || defined(CONFIG_MMC_SH_MMCIF_MODULE) #if defined(CONFIG_MMC_SH_MMCIF) || defined(CONFIG_MMC_SH_MMCIF_MODULE)
/* SH_MMCIF */ /* SH_MMCIF */
static void mmcif_set_pwr(struct platform_device *pdev, int state)
{
gpio_set_value(GPIO_PTB7, state);
}
static void mmcif_down_pwr(struct platform_device *pdev) static void mmcif_down_pwr(struct platform_device *pdev)
{ {
gpio_set_value(GPIO_PTB7, 0); cn12_set_pwr(pdev, 0);
} }
static struct resource sh_mmcif_resources[] = { static struct resource sh_mmcif_resources[] = {
...@@ -929,7 +1024,7 @@ static struct resource sh_mmcif_resources[] = { ...@@ -929,7 +1024,7 @@ static struct resource sh_mmcif_resources[] = {
}; };
static struct sh_mmcif_plat_data sh_mmcif_plat = { static struct sh_mmcif_plat_data sh_mmcif_plat = {
.set_pwr = mmcif_set_pwr, .set_pwr = cn12_set_pwr,
.down_pwr = mmcif_down_pwr, .down_pwr = mmcif_down_pwr,
.sup_pclk = 0, /* SH7724: Max Pclk/2 */ .sup_pclk = 0, /* SH7724: Max Pclk/2 */
.caps = MMC_CAP_4_BIT_DATA | .caps = MMC_CAP_4_BIT_DATA |
...@@ -960,7 +1055,9 @@ static struct platform_device *ecovec_devices[] __initdata = { ...@@ -960,7 +1055,9 @@ static struct platform_device *ecovec_devices[] __initdata = {
&ceu0_device, &ceu0_device,
&ceu1_device, &ceu1_device,
&keysc_device, &keysc_device,
&cn12_power,
#if defined(CONFIG_MMC_SDHI) || defined(CONFIG_MMC_SDHI_MODULE) #if defined(CONFIG_MMC_SDHI) || defined(CONFIG_MMC_SDHI_MODULE)
&sdhi0_power,
&sdhi0_device, &sdhi0_device,
#if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE) #if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE)
&sdhi1_device, &sdhi1_device,
...@@ -1258,8 +1355,6 @@ static int __init arch_setup(void) ...@@ -1258,8 +1355,6 @@ static int __init arch_setup(void)
gpio_request(GPIO_FN_SDHI0D2, NULL); gpio_request(GPIO_FN_SDHI0D2, NULL);
gpio_request(GPIO_FN_SDHI0D1, NULL); gpio_request(GPIO_FN_SDHI0D1, NULL);
gpio_request(GPIO_FN_SDHI0D0, NULL); gpio_request(GPIO_FN_SDHI0D0, NULL);
gpio_request(GPIO_PTB6, NULL);
gpio_direction_output(GPIO_PTB6, 0);
#else #else
/* enable MSIOF0 on CN11 (needs DS2.4 set to OFF) */ /* enable MSIOF0 on CN11 (needs DS2.4 set to OFF) */
gpio_request(GPIO_FN_MSIOF0_TXD, NULL); gpio_request(GPIO_FN_MSIOF0_TXD, NULL);
...@@ -1288,8 +1383,6 @@ static int __init arch_setup(void) ...@@ -1288,8 +1383,6 @@ static int __init arch_setup(void)
gpio_request(GPIO_FN_MMC_D0, NULL); gpio_request(GPIO_FN_MMC_D0, NULL);
gpio_request(GPIO_FN_MMC_CLK, NULL); gpio_request(GPIO_FN_MMC_CLK, NULL);
gpio_request(GPIO_FN_MMC_CMD, NULL); gpio_request(GPIO_FN_MMC_CMD, NULL);
gpio_request(GPIO_PTB7, NULL);
gpio_direction_output(GPIO_PTB7, 0);
cn12_enabled = true; cn12_enabled = true;
#elif defined(CONFIG_MMC_SDHI) || defined(CONFIG_MMC_SDHI_MODULE) #elif defined(CONFIG_MMC_SDHI) || defined(CONFIG_MMC_SDHI_MODULE)
...@@ -1301,8 +1394,6 @@ static int __init arch_setup(void) ...@@ -1301,8 +1394,6 @@ static int __init arch_setup(void)
gpio_request(GPIO_FN_SDHI1D2, NULL); gpio_request(GPIO_FN_SDHI1D2, NULL);
gpio_request(GPIO_FN_SDHI1D1, NULL); gpio_request(GPIO_FN_SDHI1D1, NULL);
gpio_request(GPIO_FN_SDHI1D0, NULL); gpio_request(GPIO_FN_SDHI1D0, NULL);
gpio_request(GPIO_PTB7, NULL);
gpio_direction_output(GPIO_PTB7, 0);
/* Card-detect, used on CN12 with SDHI1 */ /* Card-detect, used on CN12 with SDHI1 */
gpio_request(GPIO_PTW7, NULL); gpio_request(GPIO_PTW7, NULL);
......
arch/sh/boards/mach-kfr2r09/setup.c
View file @ 0a276d16
...@@ -21,6 +21,8 @@ ...@@ -21,6 +21,8 @@
#include <linux/input.h> #include <linux/input.h>
#include <linux/input/sh_keysc.h> #include <linux/input/sh_keysc.h>
#include <linux/i2c.h> #include <linux/i2c.h>
#include <linux/regulator/fixed.h>
#include <linux/regulator/machine.h>
#include <linux/usb/r8a66597.h> #include <linux/usb/r8a66597.h>
#include <linux/videodev2.h> #include <linux/videodev2.h>
#include <linux/sh_intc.h> #include <linux/sh_intc.h>
...@@ -341,6 +343,13 @@ static struct platform_device kfr2r09_camera = { ...@@ -341,6 +343,13 @@ static struct platform_device kfr2r09_camera = {
}, },
}; };
/* Fixed 3.3V regulator to be used by SDHI0 */
static struct regulator_consumer_supply fixed3v3_power_consumers[] =
{
REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
};
static struct resource kfr2r09_sh_sdhi0_resources[] = { static struct resource kfr2r09_sh_sdhi0_resources[] = {
[0] = { [0] = {
.name = "SDHI0", .name = "SDHI0",
...@@ -523,6 +532,9 @@ static int __init kfr2r09_devices_setup(void) ...@@ -523,6 +532,9 @@ static int __init kfr2r09_devices_setup(void)
&kfr2r09_sdram_leave_start, &kfr2r09_sdram_leave_start,
&kfr2r09_sdram_leave_end); &kfr2r09_sdram_leave_end);
regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers,
ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
/* enable SCIF1 serial port for YC401 console support */ /* enable SCIF1 serial port for YC401 console support */
gpio_request(GPIO_FN_SCIF1_RXD, NULL); gpio_request(GPIO_FN_SCIF1_RXD, NULL);
gpio_request(GPIO_FN_SCIF1_TXD, NULL); gpio_request(GPIO_FN_SCIF1_TXD, NULL);
......
arch/sh/boards/mach-migor/setup.c
View file @ 0a276d16
...@@ -17,6 +17,8 @@ ...@@ -17,6 +17,8 @@
#include <linux/mtd/physmap.h> #include <linux/mtd/physmap.h>
#include <linux/mtd/nand.h> #include <linux/mtd/nand.h>
#include <linux/i2c.h> #include <linux/i2c.h>
#include <linux/regulator/fixed.h>
#include <linux/regulator/machine.h>
#include <linux/smc91x.h> #include <linux/smc91x.h>
#include <linux/delay.h> #include <linux/delay.h>
#include <linux/clk.h> #include <linux/clk.h>
...@@ -386,6 +388,13 @@ static struct platform_device migor_ceu_device = { ...@@ -386,6 +388,13 @@ static struct platform_device migor_ceu_device = {
}, },
}; };
/* Fixed 3.3V regulator to be used by SDHI0 */
static struct regulator_consumer_supply fixed3v3_power_consumers[] =
{
REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
};
static struct resource sdhi_cn9_resources[] = { static struct resource sdhi_cn9_resources[] = {
[0] = { [0] = {
.name = "SDHI", .name = "SDHI",
...@@ -498,6 +507,10 @@ static int __init migor_devices_setup(void) ...@@ -498,6 +507,10 @@ static int __init migor_devices_setup(void)
&migor_sdram_enter_end, &migor_sdram_enter_end,
&migor_sdram_leave_start, &migor_sdram_leave_start,
&migor_sdram_leave_end); &migor_sdram_leave_end);
regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers,
ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
/* Let D11 LED show STATUS0 */ /* Let D11 LED show STATUS0 */
gpio_request(GPIO_FN_STATUS0, NULL); gpio_request(GPIO_FN_STATUS0, NULL);
......
arch/sh/boards/mach-rsk/setup.c
View file @ 0a276d16
...@@ -16,9 +16,17 @@ ...@@ -16,9 +16,17 @@
#include <linux/mtd/partitions.h> #include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h> #include <linux/mtd/physmap.h>
#include <linux/mtd/map.h> #include <linux/mtd/map.h>
#include <linux/regulator/fixed.h>
#include <linux/regulator/machine.h>
#include <asm/machvec.h> #include <asm/machvec.h>
#include <asm/io.h> #include <asm/io.h>
/* Dummy supplies, where voltage doesn't matter */
static struct regulator_consumer_supply dummy_supplies[] = {
REGULATOR_SUPPLY("vddvario", "smsc911x"),
REGULATOR_SUPPLY("vdd33a", "smsc911x"),
};
static const char *part_probes[] = { "cmdlinepart", NULL }; static const char *part_probes[] = { "cmdlinepart", NULL };
static struct mtd_partition rsk_partitions[] = { static struct mtd_partition rsk_partitions[] = {
...@@ -67,6 +75,8 @@ static struct platform_device *rsk_devices[] __initdata = { ...@@ -67,6 +75,8 @@ static struct platform_device *rsk_devices[] __initdata = {
static int __init rsk_devices_setup(void) static int __init rsk_devices_setup(void)
{ {
regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
return platform_add_devices(rsk_devices, return platform_add_devices(rsk_devices,
ARRAY_SIZE(rsk_devices)); ARRAY_SIZE(rsk_devices));
} }
......
arch/sh/boards/mach-sdk7786/setup.c
View file @ 0a276d16
...@@ -11,6 +11,8 @@ ...@@ -11,6 +11,8 @@
#include <linux/init.h> #include <linux/init.h>
#include <linux/platform_device.h> #include <linux/platform_device.h>
#include <linux/io.h> #include <linux/io.h>
#include <linux/regulator/fixed.h>
#include <linux/regulator/machine.h>
#include <linux/smsc911x.h> #include <linux/smsc911x.h>
#include <linux/i2c.h> #include <linux/i2c.h>
#include <linux/irq.h> #include <linux/irq.h>
...@@ -38,6 +40,12 @@ static struct platform_device heartbeat_device = { ...@@ -38,6 +40,12 @@ static struct platform_device heartbeat_device = {
.resource = &heartbeat_resource, .resource = &heartbeat_resource,
}; };
/* Dummy supplies, where voltage doesn't matter */
static struct regulator_consumer_supply dummy_supplies[] = {
REGULATOR_SUPPLY("vddvario", "smsc911x"),
REGULATOR_SUPPLY("vdd33a", "smsc911x"),
};
static struct resource smsc911x_resources[] = { static struct resource smsc911x_resources[] = {
[0] = { [0] = {
.name = "smsc911x-memory", .name = "smsc911x-memory",
...@@ -236,6 +244,8 @@ static void __init sdk7786_setup(char **cmdline_p) ...@@ -236,6 +244,8 @@ static void __init sdk7786_setup(char **cmdline_p)
{ {
pr_info("Renesas Technology Europe SDK7786 support:\n"); pr_info("Renesas Technology Europe SDK7786 support:\n");
regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
sdk7786_fpga_init(); sdk7786_fpga_init();
sdk7786_nmi_init(); sdk7786_nmi_init();
......
arch/sh/boards/mach-se/7724/setup.c
View file @ 0a276d16
...@@ -18,6 +18,8 @@ ...@@ -18,6 +18,8 @@
#include <linux/mmc/sh_mobile_sdhi.h> #include <linux/mmc/sh_mobile_sdhi.h>
#include <linux/mtd/physmap.h> #include <linux/mtd/physmap.h>
#include <linux/delay.h> #include <linux/delay.h>
#include <linux/regulator/fixed.h>
#include <linux/regulator/machine.h>
#include <linux/smc91x.h> #include <linux/smc91x.h>
#include <linux/gpio.h> #include <linux/gpio.h>
#include <linux/input.h> #include <linux/input.h>
...@@ -454,6 +456,15 @@ static struct platform_device sh7724_usb1_gadget_device = { ...@@ -454,6 +456,15 @@ static struct platform_device sh7724_usb1_gadget_device = {
.resource = sh7724_usb1_gadget_resources, .resource = sh7724_usb1_gadget_resources,
}; };
/* Fixed 3.3V regulator to be used by SDHI0, SDHI1 */
static struct regulator_consumer_supply fixed3v3_power_consumers[] =
{
REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"),
REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"),
};
static struct resource sdhi0_cn7_resources[] = { static struct resource sdhi0_cn7_resources[] = {
[0] = { [0] = {
.name = "SDHI0", .name = "SDHI0",
...@@ -684,6 +695,10 @@ static int __init devices_setup(void) ...@@ -684,6 +695,10 @@ static int __init devices_setup(void)
&ms7724se_sdram_enter_end, &ms7724se_sdram_enter_end,
&ms7724se_sdram_leave_start, &ms7724se_sdram_leave_start,
&ms7724se_sdram_leave_end); &ms7724se_sdram_leave_end);
regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers,
ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
/* Reset Release */ /* Reset Release */
fpga_out = __raw_readw(FPGA_OUT); fpga_out = __raw_readw(FPGA_OUT);
/* bit4: NTSC_PDN, bit5: NTSC_RESET */ /* bit4: NTSC_PDN, bit5: NTSC_RESET */
......
arch/sh/include/cpu-sh4/cpu/sh7757.h
View file @ 0a276d16
...@@ -283,5 +283,7 @@ enum { ...@@ -283,5 +283,7 @@ enum {
SHDMA_SLAVE_RIIC8_RX, SHDMA_SLAVE_RIIC8_RX,
SHDMA_SLAVE_RIIC9_TX, SHDMA_SLAVE_RIIC9_TX,
SHDMA_SLAVE_RIIC9_RX, SHDMA_SLAVE_RIIC9_RX,
SHDMA_SLAVE_RSPI_TX,
SHDMA_SLAVE_RSPI_RX,
}; };
#endif /* __ASM_SH7757_H__ */ #endif /* __ASM_SH7757_H__ */
arch/sh/kernel/cpu/sh4a/clock-sh7724.c
View file @ 0a276d16
...@@ -334,8 +334,8 @@ static struct clk_lookup lookups[] = { ...@@ -334,8 +334,8 @@ static struct clk_lookup lookups[] = {
CLKDEV_CON_ID("tpu0", &mstp_clks[HWBLK_TPU]), CLKDEV_CON_ID("tpu0", &mstp_clks[HWBLK_TPU]),
CLKDEV_CON_ID("irda0", &mstp_clks[HWBLK_IRDA]), CLKDEV_CON_ID("irda0", &mstp_clks[HWBLK_IRDA]),
CLKDEV_CON_ID("tsif0", &mstp_clks[HWBLK_TSIF]), CLKDEV_CON_ID("tsif0", &mstp_clks[HWBLK_TSIF]),
CLKDEV_CON_ID("usb1", &mstp_clks[HWBLK_USB1]), CLKDEV_DEV_ID("renesas_usbhs.1", &mstp_clks[HWBLK_USB1]),
CLKDEV_CON_ID("usb0", &mstp_clks[HWBLK_USB0]), CLKDEV_DEV_ID("renesas_usbhs.0", &mstp_clks[HWBLK_USB0]),
CLKDEV_CON_ID("2dg0", &mstp_clks[HWBLK_2DG]), CLKDEV_CON_ID("2dg0", &mstp_clks[HWBLK_2DG]),
CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[HWBLK_SDHI0]), CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[HWBLK_SDHI0]),
CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[HWBLK_SDHI1]), CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[HWBLK_SDHI1]),
......
arch/sh/kernel/cpu/sh4a/setup-sh7722.c
View file @ 0a276d16
...@@ -12,6 +12,7 @@ ...@@ -12,6 +12,7 @@
#include <linux/platform_device.h> #include <linux/platform_device.h>
#include <linux/serial.h> #include <linux/serial.h>
#include <linux/serial_sci.h> #include <linux/serial_sci.h>
#include <linux/sh_dma.h>
#include <linux/sh_timer.h> #include <linux/sh_timer.h>
#include <linux/sh_intc.h> #include <linux/sh_intc.h>
#include <linux/uio_driver.h> #include <linux/uio_driver.h>
......
arch/sh/kernel/cpu/sh4a/setup-sh7757.c
View file @ 0a276d16
...@@ -216,6 +216,20 @@ static const struct sh_dmae_slave_config sh7757_dmae1_slaves[] = { ...@@ -216,6 +216,20 @@ static const struct sh_dmae_slave_config sh7757_dmae1_slaves[] = {
TS_INDEX2VAL(XMIT_SZ_8BIT), TS_INDEX2VAL(XMIT_SZ_8BIT),
.mid_rid = 0x42, .mid_rid = 0x42,
}, },
{
.slave_id = SHDMA_SLAVE_RSPI_TX,
.addr = 0xfe480004,
.chcr = SM_INC | 0x800 | 0x40000000 |
TS_INDEX2VAL(XMIT_SZ_16BIT),
.mid_rid = 0xc1,
},
{
.slave_id = SHDMA_SLAVE_RSPI_RX,
.addr = 0xfe480004,
.chcr = DM_INC | 0x800 | 0x40000000 |
TS_INDEX2VAL(XMIT_SZ_16BIT),
.mid_rid = 0xc2,
},
}; };
static const struct sh_dmae_slave_config sh7757_dmae2_slaves[] = { static const struct sh_dmae_slave_config sh7757_dmae2_slaves[] = {
......
arch/sh/mm/fault.c
View file @ 0a276d16
...@@ -58,11 +58,15 @@ static void show_pte(struct mm_struct *mm, unsigned long addr) ...@@ -58,11 +58,15 @@ static void show_pte(struct mm_struct *mm, unsigned long addr)
{ {
pgd_t *pgd; pgd_t *pgd;
if (mm) if (mm) {
pgd = mm->pgd; pgd = mm->pgd;
else } else {
pgd = get_TTB(); pgd = get_TTB();
if (unlikely(!pgd))
pgd = swapper_pg_dir;
}
printk(KERN_ALERT "pgd = %p\n", pgd); printk(KERN_ALERT "pgd = %p\n", pgd);
pgd += pgd_index(addr); pgd += pgd_index(addr);
printk(KERN_ALERT "[%08lx] *pgd=%0*Lx", addr, printk(KERN_ALERT "[%08lx] *pgd=%0*Lx", addr,
......
drivers/dma/sh/shdma-base.c
View file @ 0a276d16
...@@ -483,6 +483,7 @@ static struct shdma_desc *shdma_add_desc(struct shdma_chan *schan, ...@@ -483,6 +483,7 @@ static struct shdma_desc *shdma_add_desc(struct shdma_chan *schan,
new->mark = DESC_PREPARED; new->mark = DESC_PREPARED;
new->async_tx.flags = flags; new->async_tx.flags = flags;
new->direction = direction; new->direction = direction;
new->partial = 0;
*len -= copy_size; *len -= copy_size;
if (direction == DMA_MEM_TO_MEM || direction == DMA_MEM_TO_DEV) if (direction == DMA_MEM_TO_MEM || direction == DMA_MEM_TO_DEV)
...@@ -644,6 +645,14 @@ static int shdma_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, ...@@ -644,6 +645,14 @@ static int shdma_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd,
case DMA_TERMINATE_ALL: case DMA_TERMINATE_ALL:
spin_lock_irqsave(&schan->chan_lock, flags); spin_lock_irqsave(&schan->chan_lock, flags);
ops->halt_channel(schan); ops->halt_channel(schan);
if (ops->get_partial && !list_empty(&schan->ld_queue)) {
/* Record partial transfer */
struct shdma_desc *desc = list_first_entry(&schan->ld_queue,
struct shdma_desc, node);
desc->partial = ops->get_partial(schan, desc);
}
spin_unlock_irqrestore(&schan->chan_lock, flags); spin_unlock_irqrestore(&schan->chan_lock, flags);
shdma_chan_ld_cleanup(schan, true); shdma_chan_ld_cleanup(schan, true);
......
drivers/dma/sh/shdma.c
View file @ 0a276d16
...@@ -381,6 +381,17 @@ static bool sh_dmae_chan_irq(struct shdma_chan *schan, int irq) ...@@ -381,6 +381,17 @@ static bool sh_dmae_chan_irq(struct shdma_chan *schan, int irq)
return true; return true;
} }
static size_t sh_dmae_get_partial(struct shdma_chan *schan,
struct shdma_desc *sdesc)
{
struct sh_dmae_chan *sh_chan = container_of(schan, struct sh_dmae_chan,
shdma_chan);
struct sh_dmae_desc *sh_desc = container_of(sdesc,
struct sh_dmae_desc, shdma_desc);
return (sh_desc->hw.tcr - sh_dmae_readl(sh_chan, TCR)) <<
sh_chan->xmit_shift;
}
/* Called from error IRQ or NMI */ /* Called from error IRQ or NMI */
static bool sh_dmae_reset(struct sh_dmae_device *shdev) static bool sh_dmae_reset(struct sh_dmae_device *shdev)
{ {
...@@ -632,6 +643,7 @@ static const struct shdma_ops sh_dmae_shdma_ops = { ...@@ -632,6 +643,7 @@ static const struct shdma_ops sh_dmae_shdma_ops = {
.start_xfer = sh_dmae_start_xfer, .start_xfer = sh_dmae_start_xfer,
.embedded_desc = sh_dmae_embedded_desc, .embedded_desc = sh_dmae_embedded_desc,
.chan_irq = sh_dmae_chan_irq, .chan_irq = sh_dmae_chan_irq,
.get_partial = sh_dmae_get_partial,
}; };
static int __devinit sh_dmae_probe(struct platform_device *pdev) static int __devinit sh_dmae_probe(struct platform_device *pdev)
......
drivers/sh/intc/Kconfig
View file @ 0a276d16
config SH_INTC
def_bool y
select IRQ_DOMAIN
comment "Interrupt controller options" comment "Interrupt controller options"
config INTC_USERIMASK config INTC_USERIMASK
......
drivers/sh/intc/Makefile
View file @ 0a276d16
obj-y := access.o chip.o core.o handle.o virq.o obj-y := access.o chip.o core.o handle.o irqdomain.o virq.o
obj-$(CONFIG_INTC_BALANCING) += balancing.o obj-$(CONFIG_INTC_BALANCING) += balancing.o
obj-$(CONFIG_INTC_USERIMASK) += userimask.o obj-$(CONFIG_INTC_USERIMASK) += userimask.o
......
drivers/sh/intc/core.c
View file @ 0a276d16
...@@ -25,6 +25,7 @@ ...@@ -25,6 +25,7 @@
#include <linux/stat.h> #include <linux/stat.h>
#include <linux/interrupt.h> #include <linux/interrupt.h>
#include <linux/sh_intc.h> #include <linux/sh_intc.h>
#include <linux/irqdomain.h>
#include <linux/device.h> #include <linux/device.h>
#include <linux/syscore_ops.h> #include <linux/syscore_ops.h>
#include <linux/list.h> #include <linux/list.h>
...@@ -310,6 +311,8 @@ int __init register_intc_controller(struct intc_desc *desc) ...@@ -310,6 +311,8 @@ int __init register_intc_controller(struct intc_desc *desc)
BUG_ON(k > 256); /* _INTC_ADDR_E() and _INTC_ADDR_D() are 8 bits */ BUG_ON(k > 256); /* _INTC_ADDR_E() and _INTC_ADDR_D() are 8 bits */
intc_irq_domain_init(d, hw);
/* register the vectors one by one */ /* register the vectors one by one */
for (i = 0; i < hw->nr_vectors; i++) { for (i = 0; i < hw->nr_vectors; i++) {
struct intc_vect *vect = hw->vectors + i; struct intc_vect *vect = hw->vectors + i;
...@@ -319,8 +322,8 @@ int __init register_intc_controller(struct intc_desc *desc) ...@@ -319,8 +322,8 @@ int __init register_intc_controller(struct intc_desc *desc)
if (!vect->enum_id) if (!vect->enum_id)
continue; continue;
res = irq_alloc_desc_at(irq, numa_node_id()); res = irq_create_identity_mapping(d->domain, irq);
if (res != irq && res != -EEXIST) { if (unlikely(res)) {
pr_err("can't get irq_desc for %d\n", irq); pr_err("can't get irq_desc for %d\n", irq);
continue; continue;
} }
...@@ -340,8 +343,8 @@ int __init register_intc_controller(struct intc_desc *desc) ...@@ -340,8 +343,8 @@ int __init register_intc_controller(struct intc_desc *desc)
* IRQ support, each vector still needs to have * IRQ support, each vector still needs to have
* its own backing irq_desc. * its own backing irq_desc.
*/ */
res = irq_alloc_desc_at(irq2, numa_node_id()); res = irq_create_identity_mapping(d->domain, irq2);
if (res != irq2 && res != -EEXIST) { if (unlikely(res)) {
pr_err("can't get irq_desc for %d\n", irq2); pr_err("can't get irq_desc for %d\n", irq2);
continue; continue;
} }
......
drivers/sh/intc/internals.h
View file @ 0a276d16
#include <linux/sh_intc.h> #include <linux/sh_intc.h>
#include <linux/irq.h> #include <linux/irq.h>
#include <linux/irqdomain.h>
#include <linux/list.h> #include <linux/list.h>
#include <linux/kernel.h> #include <linux/kernel.h>
#include <linux/types.h> #include <linux/types.h>
...@@ -66,6 +67,7 @@ struct intc_desc_int { ...@@ -66,6 +67,7 @@ struct intc_desc_int {
unsigned int nr_sense; unsigned int nr_sense;
struct intc_window *window; struct intc_window *window;
unsigned int nr_windows; unsigned int nr_windows;
struct irq_domain *domain;
struct irq_chip chip; struct irq_chip chip;
bool skip_suspend; bool skip_suspend;
}; };
...@@ -187,6 +189,9 @@ unsigned long intc_get_ack_handle(unsigned int irq); ...@@ -187,6 +189,9 @@ unsigned long intc_get_ack_handle(unsigned int irq);
void intc_enable_disable_enum(struct intc_desc *desc, struct intc_desc_int *d, void intc_enable_disable_enum(struct intc_desc *desc, struct intc_desc_int *d,
intc_enum enum_id, int enable); intc_enum enum_id, int enable);
/* irqdomain.c */
void intc_irq_domain_init(struct intc_desc_int *d, struct intc_hw_desc *hw);
/* virq.c */ /* virq.c */
void intc_subgroup_init(struct intc_desc *desc, struct intc_desc_int *d); void intc_subgroup_init(struct intc_desc *desc, struct intc_desc_int *d);
void intc_irq_xlate_set(unsigned int irq, intc_enum id, struct intc_desc_int *d); void intc_irq_xlate_set(unsigned int irq, intc_enum id, struct intc_desc_int *d);
......
drivers/sh/intc/irqdomain.c 0 → 100644
View file @ 0a276d16
/*
* IRQ domain support for SH INTC subsystem
*
* Copyright (C) 2012 Paul Mundt
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
#define pr_fmt(fmt) "intc: " fmt
#include <linux/irqdomain.h>
#include <linux/sh_intc.h>
#include <linux/export.h>
#include "internals.h"
/**
* intc_irq_domain_evt_xlate() - Generic xlate for vectored IRQs.
*
* This takes care of exception vector to hwirq translation through
* by way of evt2irq() translation.
*
* Note: For platforms that use a flat vector space without INTEVT this
* basically just mimics irq_domain_xlate_onecell() by way of a nopped
* out evt2irq() implementation.
*/
static int intc_evt_xlate(struct irq_domain *d, struct device_node *ctrlr,
const u32 *intspec, unsigned int intsize,
unsigned long *out_hwirq, unsigned int *out_type)
{
if (WARN_ON(intsize < 1))
return -EINVAL;
*out_hwirq = evt2irq(intspec[0]);
*out_type = IRQ_TYPE_NONE;
return 0;
}
static const struct irq_domain_ops intc_evt_ops = {
.xlate = intc_evt_xlate,
};
void __init intc_irq_domain_init(struct intc_desc_int *d,
struct intc_hw_desc *hw)
{
unsigned int irq_base, irq_end;
/*
* Quick linear revmap check
*/
irq_base = evt2irq(hw->vectors[0].vect);
irq_end = evt2irq(hw->vectors[hw->nr_vectors - 1].vect);
/*
* Linear domains have a hard-wired assertion that IRQs start at
* 0 in order to make some performance optimizations. Lamely
* restrict the linear case to these conditions here, taking the
* tree penalty for linear cases with non-zero hwirq bases.
*/
if (irq_base == 0 && irq_end == (irq_base + hw->nr_vectors - 1))
d->domain = irq_domain_add_linear(NULL, hw->nr_vectors,
&intc_evt_ops, NULL);
else
d->domain = irq_domain_add_tree(NULL, &intc_evt_ops, NULL);
BUG_ON(!d->domain);
}
drivers/sh/pfc/pinctrl.c
View file @ 0a276d16
...@@ -276,7 +276,6 @@ static int sh_pfc_pinconf_set(struct pinctrl_dev *pctldev, unsigned pin, ...@@ -276,7 +276,6 @@ static int sh_pfc_pinconf_set(struct pinctrl_dev *pctldev, unsigned pin,
unsigned long config) unsigned long config)
{ {
struct sh_pfc_pinctrl *pmx = pinctrl_dev_get_drvdata(pctldev); struct sh_pfc_pinctrl *pmx = pinctrl_dev_get_drvdata(pctldev);
struct sh_pfc *pfc = pmx->pfc;
/* Validate the new type */ /* Validate the new type */
if (config >= PINMUX_FLAG_TYPE) if (config >= PINMUX_FLAG_TYPE)
...@@ -326,20 +325,6 @@ static struct pinctrl_desc sh_pfc_pinctrl_desc = { ...@@ -326,20 +325,6 @@ static struct pinctrl_desc sh_pfc_pinctrl_desc = {
.confops = &sh_pfc_pinconf_ops, .confops = &sh_pfc_pinconf_ops,
}; };
int sh_pfc_register_pinctrl(struct sh_pfc *pfc)
{
sh_pfc_pmx = kzalloc(sizeof(struct sh_pfc_pinctrl), GFP_KERNEL);
if (unlikely(!sh_pfc_pmx))
return -ENOMEM;
spin_lock_init(&sh_pfc_pmx->lock);
sh_pfc_pmx->pfc = pfc;
return 0;
}
EXPORT_SYMBOL_GPL(sh_pfc_register_pinctrl);
static inline void __devinit sh_pfc_map_one_gpio(struct sh_pfc *pfc, static inline void __devinit sh_pfc_map_one_gpio(struct sh_pfc *pfc,
struct sh_pfc_pinctrl *pmx, struct sh_pfc_pinctrl *pmx,
struct pinmux_gpio *gpio, struct pinmux_gpio *gpio,
...@@ -481,7 +466,6 @@ static int __devexit sh_pfc_pinctrl_remove(struct platform_device *pdev) ...@@ -481,7 +466,6 @@ static int __devexit sh_pfc_pinctrl_remove(struct platform_device *pdev)
{ {
struct sh_pfc_pinctrl *pmx = platform_get_drvdata(pdev); struct sh_pfc_pinctrl *pmx = platform_get_drvdata(pdev);
pinctrl_remove_gpio_range(pmx->pctl, &sh_pfc_gpio_range);
pinctrl_unregister(pmx->pctl); pinctrl_unregister(pmx->pctl);
platform_set_drvdata(pdev, NULL); platform_set_drvdata(pdev, NULL);
...@@ -507,7 +491,7 @@ static struct platform_device sh_pfc_pinctrl_device = { ...@@ -507,7 +491,7 @@ static struct platform_device sh_pfc_pinctrl_device = {
.id = -1, .id = -1,
}; };
static int __init sh_pfc_pinctrl_init(void) static int sh_pfc_pinctrl_init(void)
{ {
int rc; int rc;
...@@ -521,10 +505,22 @@ static int __init sh_pfc_pinctrl_init(void) ...@@ -521,10 +505,22 @@ static int __init sh_pfc_pinctrl_init(void)
return rc; return rc;
} }
int sh_pfc_register_pinctrl(struct sh_pfc *pfc)
{
sh_pfc_pmx = kzalloc(sizeof(struct sh_pfc_pinctrl), GFP_KERNEL);
if (unlikely(!sh_pfc_pmx))
return -ENOMEM;
spin_lock_init(&sh_pfc_pmx->lock);
sh_pfc_pmx->pfc = pfc;
return sh_pfc_pinctrl_init();
}
EXPORT_SYMBOL_GPL(sh_pfc_register_pinctrl);
static void __exit sh_pfc_pinctrl_exit(void) static void __exit sh_pfc_pinctrl_exit(void)
{ {
platform_driver_unregister(&sh_pfc_pinctrl_driver); platform_driver_unregister(&sh_pfc_pinctrl_driver);
} }
subsys_initcall(sh_pfc_pinctrl_init);
module_exit(sh_pfc_pinctrl_exit); module_exit(sh_pfc_pinctrl_exit);
drivers/tty/serial/sh-sci.c
View file @ 0a276d16
...@@ -25,6 +25,7 @@ ...@@ -25,6 +25,7 @@
#include <linux/module.h> #include <linux/module.h>
#include <linux/errno.h> #include <linux/errno.h>
#include <linux/sh_dma.h>
#include <linux/timer.h> #include <linux/timer.h>
#include <linux/interrupt.h> #include <linux/interrupt.h>
#include <linux/tty.h> #include <linux/tty.h>
...@@ -1410,8 +1411,8 @@ static void work_fn_rx(struct work_struct *work) ...@@ -1410,8 +1411,8 @@ static void work_fn_rx(struct work_struct *work)
/* Handle incomplete DMA receive */ /* Handle incomplete DMA receive */
struct tty_struct *tty = port->state->port.tty; struct tty_struct *tty = port->state->port.tty;
struct dma_chan *chan = s->chan_rx; struct dma_chan *chan = s->chan_rx;
struct sh_desc *sh_desc = container_of(desc, struct sh_desc, struct shdma_desc *sh_desc = container_of(desc,
async_tx); struct shdma_desc, async_tx);
unsigned long flags; unsigned long flags;
int count; int count;
......
include/linux/shdma-base.h
View file @ 0a276d16
...@@ -50,6 +50,7 @@ struct shdma_desc { ...@@ -50,6 +50,7 @@ struct shdma_desc {
struct list_head node; struct list_head node;
struct dma_async_tx_descriptor async_tx; struct dma_async_tx_descriptor async_tx;
enum dma_transfer_direction direction; enum dma_transfer_direction direction;
size_t partial;
dma_cookie_t cookie; dma_cookie_t cookie;
int chunks; int chunks;
int mark; int mark;
...@@ -98,6 +99,7 @@ struct shdma_ops { ...@@ -98,6 +99,7 @@ struct shdma_ops {
void (*start_xfer)(struct shdma_chan *, struct shdma_desc *); void (*start_xfer)(struct shdma_chan *, struct shdma_desc *);
struct shdma_desc *(*embedded_desc)(void *, int); struct shdma_desc *(*embedded_desc)(void *, int);
bool (*chan_irq)(struct shdma_chan *, int); bool (*chan_irq)(struct shdma_chan *, int);
size_t (*get_partial)(struct shdma_chan *, struct shdma_desc *);
}; };
struct shdma_dev { struct shdma_dev {
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7