ath10k: store coverage-class in case firmware is not booted

This way, we can apply the values when the NIC does come up.
Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

drivers/net/wireless/ath/ath10k/hw.c

@@ -604,8 +604,13 @@ static void ath10k_hw_qca988x_set_coverage_class(struct ath10k *ar,
 
 	/* Only modify registers if the core is started. */
 	if ((ar->state != ATH10K_STATE_ON) &&
-	    (ar->state != ATH10K_STATE_RESTARTED))
+	    (ar->state != ATH10K_STATE_RESTARTED)) {
+		spin_lock_bh(&ar->data_lock);
+		/* Store config value for when radio boots up */
+		ar->fw_coverage.coverage_class = value;
+		spin_unlock_bh(&ar->data_lock);
 		goto unlock;
+	}
 
 	/* Retrieve the current values of the two registers that need to be
 	 * adjusted.
@@ -637,7 +642,7 @@ static void ath10k_hw_qca988x_set_coverage_class(struct ath10k *ar,
 		ar->fw_coverage.reg_ack_cts_timeout_orig = timeout_reg;
 	ar->fw_coverage.reg_phyclk = phyclk_reg;
 
-	/* Calculat new value based on the (original) firmware calculation. */
+	/* Calculate new value based on the (original) firmware calculation. */
 	slottime_reg = ar->fw_coverage.reg_slottime_orig;
 	timeout_reg = ar->fw_coverage.reg_ack_cts_timeout_orig;