Commit 0a5ebc88 authored by Greg Kroah-Hartman's avatar Greg Kroah-Hartman

USB: input: usbtouchscreen.c: fix up dev_* messages

Previously I had made the struct device point to the input device, but
after talking with Dmitry, he said that the USB device would make more
sense for this driver to point to.  So converted it to use that instead.

CC: Dmitry Torokhov <dmitry.torokhov@gmail.com>
CC: Henrik Rydberg <rydberg@euromail.se>
CC: Rusty Russell <rusty@rustcorp.com.au>
CC: Viresh Kumar <viresh.kumar@st.com>
CC: Armando Visconti <armando.visconti@st.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 65e78a20
......@@ -269,7 +269,7 @@ static int e2i_init(struct usbtouch_usb *usbtouch)
0x01, 0x02, 0x0000, 0x0081,
NULL, 0, USB_CTRL_SET_TIMEOUT);
dev_dbg(&usbtouch->input->dev,
dev_dbg(&usbtouch->interface->dev,
"%s - usb_control_msg - E2I_RESET - bytes|err: %d\n",
__func__, ret);
return ret;
......@@ -426,7 +426,7 @@ static int mtouch_init(struct usbtouch_usb *usbtouch)
MTOUCHUSB_RESET,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
1, 0, NULL, 0, USB_CTRL_SET_TIMEOUT);
dev_dbg(&usbtouch->input->dev,
dev_dbg(&usbtouch->interface->dev,
"%s - usb_control_msg - MTOUCHUSB_RESET - bytes|err: %d\n",
__func__, ret);
if (ret < 0)
......@@ -438,7 +438,7 @@ static int mtouch_init(struct usbtouch_usb *usbtouch)
MTOUCHUSB_ASYNC_REPORT,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
1, 1, NULL, 0, USB_CTRL_SET_TIMEOUT);
dev_dbg(&usbtouch->input->dev,
dev_dbg(&usbtouch->interface->dev,
"%s - usb_control_msg - MTOUCHUSB_ASYNC_REPORT - bytes|err: %d\n",
__func__, ret);
if (ret >= 0)
......@@ -740,29 +740,29 @@ static int jastec_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
#ifdef CONFIG_TOUCHSCREEN_USB_ZYTRONIC
static int zytronic_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
{
struct input_dev *input = dev->input;
struct usb_interface *intf = dev->interface;
switch (pkt[0]) {
case 0x3A: /* command response */
dev_dbg(&input->dev, "%s: Command response %d\n", __func__, pkt[1]);
dev_dbg(&intf->dev, "%s: Command response %d\n", __func__, pkt[1]);
break;
case 0xC0: /* down */
dev->x = (pkt[1] & 0x7f) | ((pkt[2] & 0x07) << 7);
dev->y = (pkt[3] & 0x7f) | ((pkt[4] & 0x07) << 7);
dev->touch = 1;
dev_dbg(&input->dev, "%s: down %d,%d\n", __func__, dev->x, dev->y);
dev_dbg(&intf->dev, "%s: down %d,%d\n", __func__, dev->x, dev->y);
return 1;
case 0x80: /* up */
dev->x = (pkt[1] & 0x7f) | ((pkt[2] & 0x07) << 7);
dev->y = (pkt[3] & 0x7f) | ((pkt[4] & 0x07) << 7);
dev->touch = 0;
dev_dbg(&input->dev, "%s: up %d,%d\n", __func__, dev->x, dev->y);
dev_dbg(&intf->dev, "%s: up %d,%d\n", __func__, dev->x, dev->y);
return 1;
default:
dev_dbg(&input->dev, "%s: Unknown return %d\n", __func__, pkt[0]);
dev_dbg(&intf->dev, "%s: Unknown return %d\n", __func__, pkt[0]);
break;
}
......@@ -817,7 +817,7 @@ static int nexio_alloc(struct usbtouch_usb *usbtouch)
priv->ack = usb_alloc_urb(0, GFP_KERNEL);
if (!priv->ack) {
dev_dbg(&usbtouch->input->dev,
dev_dbg(&usbtouch->interface->dev,
"%s - usb_alloc_urb failed: usbtouch->ack\n", __func__);
goto err_ack_buf;
}
......@@ -1355,7 +1355,7 @@ static void usbtouch_process_multi(struct usbtouch_usb *usbtouch,
static void usbtouch_irq(struct urb *urb)
{
struct usbtouch_usb *usbtouch = urb->context;
struct device *dev = &usbtouch->input->dev;
struct device *dev = &usbtouch->interface->dev;
int retval;
switch (urb->status) {
......@@ -1388,8 +1388,7 @@ static void usbtouch_irq(struct urb *urb)
usb_mark_last_busy(interface_to_usbdev(usbtouch->interface));
retval = usb_submit_urb(urb, GFP_ATOMIC);
if (retval)
dev_err(&usbtouch->input->dev,
"%s - usb_submit_urb failed with result: %d\n",
dev_err(dev, "%s - usb_submit_urb failed with result: %d\n",
__func__, retval);
}
......@@ -1465,7 +1464,7 @@ static int usbtouch_reset_resume(struct usb_interface *intf)
if (usbtouch->type->init) {
err = usbtouch->type->init(usbtouch);
if (err) {
dev_dbg(&input->dev,
dev_dbg(&intf->dev,
"%s - type->init() failed, err: %d\n",
__func__, err);
return err;
......@@ -1639,7 +1638,7 @@ static int usbtouch_probe(struct usb_interface *intf,
err = usb_submit_urb(usbtouch->irq, GFP_KERNEL);
if (err) {
usb_autopm_put_interface(intf);
dev_err(&input_dev->dev,
dev_err(&intf->dev,
"%s - usb_submit_urb failed with result: %d\n",
__func__, err);
goto out_unregister_input;
......@@ -1671,7 +1670,7 @@ static void usbtouch_disconnect(struct usb_interface *intf)
if (!usbtouch)
return;
dev_dbg(&usbtouch->input->dev,
dev_dbg(&intf->dev,
"%s - usbtouch is initialized, cleaning up\n", __func__);
usb_set_intfdata(intf, NULL);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment