staging: mt7621-dts: fix pinctrl properties for ethernet

Add pinctrl properties with rgmii1 & mdio pins under ethernet node which
was wrongfully put under an external phy node.
GMAC1 will start working with this fix.

Link: https://lore.kernel.org/netdev/02ecce91-7aad-4392-c9d7-f45ca1b31e0b@arinc9.com/T/

Move GB-PC2 specific phy_external node to its own device tree.
Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Link: https://lore.kernel.org/r/20220125153903.1469-5-arinc.unal@arinc9.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/mt7621-dts/gbpc2.dts

@@ -13,10 +13,16 @@ &default_gpio {
 	function = "gpio";
 };
 
-&gmac1 {
-	status = "ok";
-};
+&ethernet {
+	gmac1: mac@1 {
+		status = "ok";
+		phy-handle = <&phy_external>;
+	};
 
-&phy_external {
-	status = "ok";
+	mdio-bus {
+		phy_external: ethernet-phy@5 {
+			reg = <5>;
+			phy-mode = "rgmii-rxid";
+		};
+	};
 };

drivers/staging/mt7621-dts/mt7621.dtsi

@@ -325,6 +325,9 @@ ethernet: ethernet@1e100000 {
 
 		mediatek,ethsys = <&sysc>;
 
+		pinctrl-names = "default";
+		pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
+
 		gmac0: mac@0 {
 			compatible = "mediatek,eth-mac";
 			reg = <0>;
@@ -342,22 +345,12 @@ gmac1: mac@1 {
 			reg = <1>;
 			status = "off";
 			phy-mode = "rgmii-rxid";
-			phy-handle = <&phy_external>;
 		};
 
 		mdio-bus {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			phy_external: ethernet-phy@5 {
-				status = "off";
-				reg = <5>;
-				phy-mode = "rgmii-rxid";
-
-				pinctrl-names = "default";
-				pinctrl-0 = <&rgmii2_pins>;
-			};
-
 			switch0: switch0@0 {
 				compatible = "mediatek,mt7621";
 				reg = <0>;