Commit 0aa817f0 authored by Christoph Lameter's avatar Christoph Lameter Committed by Linus Torvalds

Slab allocators: define common size limitations

Currently we have a maze of configuration variables that determine the
maximum slab size.  Worst of all it seems to vary between SLAB and SLUB.

So define a common maximum size for kmalloc.  For conveniences sake we use
the maximum size ever supported which is 32 MB.  We limit the maximum size
to a lower limit if MAX_ORDER does not allow such large allocations.

For many architectures this patch will have the effect of adding large
kmalloc sizes.  x86_64 adds 5 new kmalloc sizes.  So a small amount of
memory will be needed for these caches (contemporary SLAB has dynamically
sizeable node and cpu structure so the waste is less than in the past)

Most architectures will then be able to allocate object with sizes up to
MAX_ORDER.  We have had repeated breakage (in fact whenever we doubled the
number of supported processors) on IA64 because one or the other struct
grew beyond what the slab allocators supported.  This will avoid future
issues and f.e.  avoid fixes for 2k and 4k cpu support.

CONFIG_LARGE_ALLOCS is no longer necessary so drop it.

It fixes sparc64 with SLAB.
Signed-off-by: default avatarChristoph Lameter <clameter@sgi.com>
Signed-off-by: default avatar"David S. Miller" <davem@davemloft.net>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
parent 3ec09742
......@@ -560,14 +560,6 @@ endchoice
source "mm/Kconfig"
config LARGE_ALLOCS
bool "Allow allocating large blocks (> 1MB) of memory"
help
Allow the slab memory allocator to keep chains for very large
memory sizes - upto 32MB. You may need this if your system has
a lot of RAM, and you need to able to allocate very large
contiguous chunks. If unsure, say N.
config BFIN_DMA_5XX
bool "Enable DMA Support"
depends on (BF533 || BF532 || BF531 || BF537 || BF536 || BF534 || BF561)
......
......@@ -102,14 +102,6 @@ config HIGHPTE
with a lot of RAM, this can be wasteful of precious low memory.
Setting this option will put user-space page tables in high memory.
config LARGE_ALLOCS
bool "Allow allocating large blocks (> 1MB) of memory"
help
Allow the slab memory allocator to keep chains for very large memory
sizes - up to 32MB. You may need this if your system has a lot of
RAM, and you need to able to allocate very large contiguous chunks.
If unsure, say N.
source "mm/Kconfig"
choice
......
......@@ -470,14 +470,6 @@ config AVNET
default y
depends on (AVNET5282)
config LARGE_ALLOCS
bool "Allow allocating large blocks (> 1MB) of memory"
help
Allow the slab memory allocator to keep chains for very large
memory sizes - upto 32MB. You may need this if your system has
a lot of RAM, and you need to able to allocate very large
contiguous chunks. If unsure, say N.
config 4KSTACKS
bool "Use 4Kb for kernel stacks instead of 8Kb"
default y
......
......@@ -240,14 +240,6 @@ menu "Processor type and features"
config RESET_GUARD
bool "Reset Guard"
config LARGE_ALLOCS
bool "Allow allocating large blocks (> 1MB) of memory"
help
Allow the slab memory allocator to keep chains for very large
memory sizes - upto 32MB. You may need this if your system has
a lot of RAM, and you need to able to allocate very large
contiguous chunks. If unsure, say N.
source "mm/Kconfig"
endmenu
......
......@@ -19,17 +19,27 @@
CACHE(32768)
CACHE(65536)
CACHE(131072)
#if (NR_CPUS > 512) || (MAX_NUMNODES > 256) || !defined(CONFIG_MMU)
#if KMALLOC_MAX_SIZE >= 262144
CACHE(262144)
#endif
#ifndef CONFIG_MMU
#if KMALLOC_MAX_SIZE >= 524288
CACHE(524288)
#endif
#if KMALLOC_MAX_SIZE >= 1048576
CACHE(1048576)
#ifdef CONFIG_LARGE_ALLOCS
#endif
#if KMALLOC_MAX_SIZE >= 2097152
CACHE(2097152)
#endif
#if KMALLOC_MAX_SIZE >= 4194304
CACHE(4194304)
#endif
#if KMALLOC_MAX_SIZE >= 8388608
CACHE(8388608)
#endif
#if KMALLOC_MAX_SIZE >= 16777216
CACHE(16777216)
#endif
#if KMALLOC_MAX_SIZE >= 33554432
CACHE(33554432)
#endif /* CONFIG_LARGE_ALLOCS */
#endif /* CONFIG_MMU */
#endif
......@@ -73,6 +73,21 @@ static inline void *kmem_cache_alloc_node(struct kmem_cache *cachep,
}
#endif
/*
* The largest kmalloc size supported by the slab allocators is
* 32 megabyte (2^25) or the maximum allocatable page order if that is
* less than 32 MB.
*
* WARNING: Its not easy to increase this value since the allocators have
* to do various tricks to work around compiler limitations in order to
* ensure proper constant folding.
*/
#define KMALLOC_SHIFT_HIGH ((MAX_ORDER + PAGE_SHIFT) <= 25 ? \
(MAX_ORDER + PAGE_SHIFT) : 25)
#define KMALLOC_MAX_SIZE (1UL << KMALLOC_SHIFT_HIGH)
#define KMALLOC_MAX_ORDER (KMALLOC_SHIFT_HIGH - PAGE_SHIFT)
/*
* Common kmalloc functions provided by all allocators
*/
......
......@@ -58,17 +58,6 @@ struct kmem_cache {
*/
#define KMALLOC_SHIFT_LOW 3
#ifdef CONFIG_LARGE_ALLOCS
#define KMALLOC_SHIFT_HIGH ((MAX_ORDER + PAGE_SHIFT) =< 25 ? \
(MAX_ORDER + PAGE_SHIFT - 1) : 25)
#else
#if !defined(CONFIG_MMU) || NR_CPUS > 512 || MAX_NUMNODES > 256
#define KMALLOC_SHIFT_HIGH 20
#else
#define KMALLOC_SHIFT_HIGH 18
#endif
#endif
/*
* We keep the general caches in an array of slab caches that are used for
* 2^x bytes of allocations.
......@@ -79,7 +68,7 @@ extern struct kmem_cache kmalloc_caches[KMALLOC_SHIFT_HIGH + 1];
* Sorry that the following has to be that ugly but some versions of GCC
* have trouble with constant propagation and loops.
*/
static inline int kmalloc_index(int size)
static inline int kmalloc_index(size_t size)
{
/*
* We should return 0 if size == 0 but we use the smallest object
......@@ -87,7 +76,7 @@ static inline int kmalloc_index(int size)
*/
WARN_ON_ONCE(size == 0);
if (size > (1 << KMALLOC_SHIFT_HIGH))
if (size > KMALLOC_MAX_SIZE)
return -1;
if (size > 64 && size <= 96)
......@@ -110,17 +99,13 @@ static inline int kmalloc_index(int size)
if (size <= 64 * 1024) return 16;
if (size <= 128 * 1024) return 17;
if (size <= 256 * 1024) return 18;
#if KMALLOC_SHIFT_HIGH > 18
if (size <= 512 * 1024) return 19;
if (size <= 1024 * 1024) return 20;
#endif
#if KMALLOC_SHIFT_HIGH > 20
if (size <= 2 * 1024 * 1024) return 21;
if (size <= 4 * 1024 * 1024) return 22;
if (size <= 8 * 1024 * 1024) return 23;
if (size <= 16 * 1024 * 1024) return 24;
if (size <= 32 * 1024 * 1024) return 25;
#endif
return -1;
/*
......
......@@ -568,21 +568,6 @@ static void **dbg_userword(struct kmem_cache *cachep, void *objp)
#endif
/*
* Maximum size of an obj (in 2^order pages) and absolute limit for the gfp
* order.
*/
#if defined(CONFIG_LARGE_ALLOCS)
#define MAX_OBJ_ORDER 13 /* up to 32Mb */
#define MAX_GFP_ORDER 13 /* up to 32Mb */
#elif defined(CONFIG_MMU)
#define MAX_OBJ_ORDER 5 /* 32 pages */
#define MAX_GFP_ORDER 5 /* 32 pages */
#else
#define MAX_OBJ_ORDER 8 /* up to 1Mb */
#define MAX_GFP_ORDER 8 /* up to 1Mb */
#endif
/*
* Do not go above this order unless 0 objects fit into the slab.
*/
......@@ -2002,7 +1987,7 @@ static size_t calculate_slab_order(struct kmem_cache *cachep,
size_t left_over = 0;
int gfporder;
for (gfporder = 0; gfporder <= MAX_GFP_ORDER; gfporder++) {
for (gfporder = 0; gfporder <= KMALLOC_MAX_ORDER; gfporder++) {
unsigned int num;
size_t remainder;
......@@ -2148,7 +2133,7 @@ kmem_cache_create (const char *name, size_t size, size_t align,
* Sanity checks... these are all serious usage bugs.
*/
if (!name || in_interrupt() || (size < BYTES_PER_WORD) ||
(size > (1 << MAX_OBJ_ORDER) * PAGE_SIZE) || dtor) {
size > KMALLOC_MAX_SIZE || dtor) {
printk(KERN_ERR "%s: Early error in slab %s\n", __FUNCTION__,
name);
BUG();
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment