Commit 0aa821d8 authored by Stefan Agner's avatar Stefan Agner Committed by Greg Kroah-Hartman

serial: imx: fix cached UCR2 read on software reset

To reset the UART the SRST needs be cleared (low active). According
to the documentation the bit will remain active for 4 module clocks
until it is cleared (set to 1).

Hence the real register need to be read in case the cached register
indicates that the SRST bit is zero.

This bug lead to wrong baudrate because the baud rate register got
restored before reset completed in imx_flush_buffer.

Fixes: 3a0ab62f ("serial: imx: implement shadow registers for UCRx and UFCR")
Signed-off-by: default avatarStefan Agner <stefan@agner.ch>
Reviewed-by: default avatarFabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: default avatarUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 6d215f83
......@@ -316,7 +316,7 @@ static u32 imx_uart_readl(struct imx_port *sport, u32 offset)
* differ from the value that was last written. As it only
* clears after being set, reread conditionally.
*/
if (sport->ucr2 & UCR2_SRST)
if (!(sport->ucr2 & UCR2_SRST))
sport->ucr2 = readl(sport->port.membase + offset);
return sport->ucr2;
break;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment