Commit 0ab7f6bf authored by Arun Ramadoss's avatar Arun Ramadoss Committed by David S. Miller

net: dsa: microchip: ksz9477: use common xmii function

In ksz9477.c file, configuring the xmii register is performed based on
the flag NEW_XMII. The flag is reset for ksz9893 switch and set for
other switch. This patch uses the ksz common xmii set and get function.
The bit values are configured based on the chip id.
Signed-off-by: default avatarArun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent b19ac41f
......@@ -19,11 +19,6 @@
#include "ksz_common.h"
#include "ksz9477.h"
/* Used with variable features to indicate capabilities. */
#define GBIT_SUPPORT BIT(0)
#define NEW_XMII BIT(1)
#define IS_9893 BIT(2)
static void ksz_cfg(struct ksz_device *dev, u32 addr, u8 bits, bool set)
{
regmap_update_bits(dev->regmap[0], addr, bits, set ? bits : 0);
......@@ -866,116 +861,18 @@ void ksz9477_port_mirror_del(struct ksz_device *dev, int port,
PORT_MIRROR_SNIFFER, false);
}
static int ksz9477_get_xmii(struct ksz_device *dev, u8 data)
{
int mode;
if (dev->features & NEW_XMII) {
switch (data & PORT_MII_SEL_M) {
case PORT_MII_SEL:
mode = 0;
break;
case PORT_RMII_SEL:
mode = 1;
break;
case PORT_GMII_SEL:
mode = 2;
break;
default:
mode = 3;
}
} else {
switch (data & PORT_MII_SEL_M) {
case PORT_MII_SEL_S1:
mode = 0;
break;
case PORT_RMII_SEL_S1:
mode = 1;
break;
case PORT_GMII_SEL_S1:
mode = 2;
break;
default:
mode = 3;
}
}
return mode;
}
static void ksz9477_set_xmii(struct ksz_device *dev, int mode, u8 *data)
{
u8 xmii;
if (dev->features & NEW_XMII) {
switch (mode) {
case 0:
xmii = PORT_MII_SEL;
break;
case 1:
xmii = PORT_RMII_SEL;
break;
case 2:
xmii = PORT_GMII_SEL;
break;
default:
xmii = PORT_RGMII_SEL;
break;
}
} else {
switch (mode) {
case 0:
xmii = PORT_MII_SEL_S1;
break;
case 1:
xmii = PORT_RMII_SEL_S1;
break;
case 2:
xmii = PORT_GMII_SEL_S1;
break;
default:
xmii = PORT_RGMII_SEL_S1;
break;
}
}
*data &= ~PORT_MII_SEL_M;
*data |= xmii;
}
static phy_interface_t ksz9477_get_interface(struct ksz_device *dev, int port)
{
phy_interface_t interface;
bool gbit;
int mode;
u8 data8;
if (port < dev->phy_port_cnt)
return PHY_INTERFACE_MODE_NA;
ksz_pread8(dev, port, REG_PORT_XMII_CTRL_1, &data8);
gbit = ksz_get_gbit(dev, port);
mode = ksz9477_get_xmii(dev, data8);
switch (mode) {
case 2:
interface = PHY_INTERFACE_MODE_GMII;
if (gbit)
break;
fallthrough;
case 0:
interface = PHY_INTERFACE_MODE_MII;
break;
case 1:
interface = PHY_INTERFACE_MODE_RMII;
break;
default:
interface = PHY_INTERFACE_MODE_RGMII;
if (data8 & PORT_RGMII_ID_EG_ENABLE)
interface = PHY_INTERFACE_MODE_RGMII_TXID;
if (data8 & PORT_RGMII_ID_IG_ENABLE) {
interface = PHY_INTERFACE_MODE_RGMII_RXID;
if (data8 & PORT_RGMII_ID_EG_ENABLE)
interface = PHY_INTERFACE_MODE_RGMII_ID;
}
break;
}
interface = ksz_get_xmii(dev, port, gbit);
return interface;
}
......@@ -1049,8 +946,8 @@ void ksz9477_port_setup(struct ksz_device *dev, int port, bool cpu_port)
{
struct ksz_port *p = &dev->ports[port];
struct dsa_switch *ds = dev->ds;
u8 data8, member;
u16 data16;
u8 member;
/* enable tag tail for host port */
if (cpu_port)
......@@ -1092,42 +989,7 @@ void ksz9477_port_setup(struct ksz_device *dev, int port, bool cpu_port)
true);
/* configure MAC to 1G & RGMII mode */
ksz_pread8(dev, port, REG_PORT_XMII_CTRL_1, &data8);
switch (p->interface) {
case PHY_INTERFACE_MODE_MII:
ksz9477_set_xmii(dev, 0, &data8);
ksz_set_gbit(dev, port, false);
p->phydev.speed = SPEED_100;
break;
case PHY_INTERFACE_MODE_RMII:
ksz9477_set_xmii(dev, 1, &data8);
ksz_set_gbit(dev, port, false);
p->phydev.speed = SPEED_100;
break;
case PHY_INTERFACE_MODE_GMII:
ksz9477_set_xmii(dev, 2, &data8);
ksz_set_gbit(dev, port, true);
p->phydev.speed = SPEED_1000;
break;
default:
ksz9477_set_xmii(dev, 3, &data8);
ksz_set_gbit(dev, port, true);
data8 &= ~PORT_RGMII_ID_IG_ENABLE;
data8 &= ~PORT_RGMII_ID_EG_ENABLE;
if (p->interface == PHY_INTERFACE_MODE_RGMII_ID ||
p->interface == PHY_INTERFACE_MODE_RGMII_RXID)
data8 |= PORT_RGMII_ID_IG_ENABLE;
if (p->interface == PHY_INTERFACE_MODE_RGMII_ID ||
p->interface == PHY_INTERFACE_MODE_RGMII_TXID)
data8 |= PORT_RGMII_ID_EG_ENABLE;
/* On KSZ9893, disable RGMII in-band status support */
if (dev->features & IS_9893)
data8 &= ~PORT_MII_MAC_MODE;
p->phydev.speed = SPEED_1000;
break;
}
ksz_pwrite8(dev, port, REG_PORT_XMII_CTRL_1, data8);
p->phydev.duplex = 1;
ksz_set_xmii(dev, port, p->interface);
}
if (cpu_port)
......@@ -1315,9 +1177,6 @@ int ksz9477_switch_init(struct ksz_device *dev)
dev->features &= ~GBIT_SUPPORT;
dev->phy_port_cnt = 2;
} else {
/* Chip uses new XMII register definitions. */
dev->features |= NEW_XMII;
/* Chip does not support gigabit. */
if (!(data8 & SW_GIGABIT_ABLE))
dev->features &= ~GBIT_SUPPORT;
......
......@@ -1175,29 +1175,11 @@
#define PORT_LINK_STATUS_FAIL BIT(0)
/* 3 - xMII */
#define REG_PORT_XMII_CTRL_0 0x0300
#define PORT_SGMII_SEL BIT(7)
#define PORT_GRXC_ENABLE BIT(0)
#define REG_PORT_XMII_CTRL_1 0x0301
#define PORT_RMII_CLK_SEL BIT(7)
#define PORT_MII_SEL_EDGE BIT(5)
#define PORT_RGMII_ID_IG_ENABLE BIT(4)
#define PORT_RGMII_ID_EG_ENABLE BIT(3)
#define PORT_MII_MAC_MODE BIT(2)
#define PORT_MII_SEL_M 0x3
/* S1 */
#define PORT_MII_SEL_S1 0x0
#define PORT_RMII_SEL_S1 0x1
#define PORT_GMII_SEL_S1 0x2
#define PORT_RGMII_SEL_S1 0x3
/* S2 */
#define PORT_RGMII_SEL 0x0
#define PORT_RMII_SEL 0x1
#define PORT_GMII_SEL 0x2
#define PORT_MII_SEL 0x3
/* 4 - MAC */
#define REG_PORT_MAC_CTRL_0 0x0400
......
......@@ -1436,6 +1436,9 @@ void ksz_set_xmii(struct ksz_device *dev, int port, phy_interface_t interface)
case PHY_INTERFACE_MODE_RGMII_TXID:
case PHY_INTERFACE_MODE_RGMII_RXID:
data8 |= bitval[P_RGMII_SEL];
/* On KSZ9893, disable RGMII in-band status support */
if (dev->features & IS_9893)
data8 &= ~P_MII_MAC_MODE;
break;
default:
dev_err(dev->dev, "Unsupported interface '%s' for port %d\n",
......@@ -1453,6 +1456,39 @@ void ksz_set_xmii(struct ksz_device *dev, int port, phy_interface_t interface)
ksz_pwrite8(dev, port, regs[P_XMII_CTRL_1], data8);
}
phy_interface_t ksz_get_xmii(struct ksz_device *dev, int port, bool gbit)
{
const u8 *bitval = dev->info->xmii_ctrl1;
const u16 *regs = dev->info->regs;
phy_interface_t interface;
u8 data8;
u8 val;
ksz_pread8(dev, port, regs[P_XMII_CTRL_1], &data8);
val = FIELD_GET(P_MII_SEL_M, data8);
if (val == bitval[P_MII_SEL]) {
if (gbit)
interface = PHY_INTERFACE_MODE_GMII;
else
interface = PHY_INTERFACE_MODE_MII;
} else if (val == bitval[P_RMII_SEL]) {
interface = PHY_INTERFACE_MODE_RGMII;
} else {
interface = PHY_INTERFACE_MODE_RGMII;
if (data8 & P_RGMII_ID_EG_ENABLE)
interface = PHY_INTERFACE_MODE_RGMII_TXID;
if (data8 & P_RGMII_ID_IG_ENABLE) {
interface = PHY_INTERFACE_MODE_RGMII_RXID;
if (data8 & P_RGMII_ID_EG_ENABLE)
interface = PHY_INTERFACE_MODE_RGMII_ID;
}
}
return interface;
}
static void ksz_phylink_mac_config(struct dsa_switch *ds, int port,
unsigned int mode,
const struct phylink_link_state *state)
......@@ -1484,7 +1520,7 @@ bool ksz_get_gbit(struct ksz_device *dev, int port)
return gbit;
}
void ksz_set_gbit(struct ksz_device *dev, int port, bool gbit)
static void ksz_set_gbit(struct ksz_device *dev, int port, bool gbit)
{
const u8 *bitval = dev->info->xmii_ctrl1;
const u16 *regs = dev->info->regs;
......
......@@ -319,8 +319,8 @@ void ksz_init_mib_timer(struct ksz_device *dev);
void ksz_r_mib_stats64(struct ksz_device *dev, int port);
void ksz_port_stp_state_set(struct dsa_switch *ds, int port, u8 state);
bool ksz_get_gbit(struct ksz_device *dev, int port);
void ksz_set_gbit(struct ksz_device *dev, int port, bool gbit);
void ksz_set_xmii(struct ksz_device *dev, int port, phy_interface_t interface);
phy_interface_t ksz_get_xmii(struct ksz_device *dev, int port, bool gbit);
extern const struct ksz_chip_data ksz_switch_chips[];
/* Common register access functions */
......@@ -492,6 +492,10 @@ static inline int is_lan937x(struct ksz_device *dev)
#define SW_START 0x01
/* Used with variable features to indicate capabilities. */
#define GBIT_SUPPORT BIT(0)
#define IS_9893 BIT(2)
/* xMII configuration */
#define P_MII_DUPLEX_M BIT(6)
#define P_MII_100MBIT_M BIT(4)
......@@ -499,6 +503,7 @@ static inline int is_lan937x(struct ksz_device *dev)
#define P_GMII_1GBIT_M BIT(6)
#define P_RGMII_ID_IG_ENABLE BIT(4)
#define P_RGMII_ID_EG_ENABLE BIT(3)
#define P_MII_MAC_MODE BIT(2)
#define P_MII_SEL_M 0x3
/* Regmap tables generation */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment