Commit 0abfd494 authored by Vivien Didelot's avatar Vivien Didelot Committed by David S. Miller

net: dsa: use dedicated CPU port

Each port in DSA has its own dedicated CPU port currently available in
its parent switch's ds->ports[port].cpu_dp. Use it instead of getting
the unique tree CPU port, which will be deprecated soon.
Signed-off-by: default avatarVivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 6e617de8
......@@ -1336,7 +1336,7 @@ EXPORT_SYMBOL(b53_fdb_dump);
int b53_br_join(struct dsa_switch *ds, int port, struct net_device *br)
{
struct b53_device *dev = ds->priv;
s8 cpu_port = ds->dst->cpu_dp->index;
s8 cpu_port = ds->ports[port].cpu_dp->index;
u16 pvlan, reg;
unsigned int i;
......@@ -1382,7 +1382,7 @@ void b53_br_leave(struct dsa_switch *ds, int port, struct net_device *br)
{
struct b53_device *dev = ds->priv;
struct b53_vlan *vl = &dev->vlans[0];
s8 cpu_port = ds->dst->cpu_dp->index;
s8 cpu_port = ds->ports[port].cpu_dp->index;
unsigned int i;
u16 pvlan, reg, pvid;
......
......@@ -661,7 +661,7 @@ static int bcm_sf2_sw_resume(struct dsa_switch *ds)
static void bcm_sf2_sw_get_wol(struct dsa_switch *ds, int port,
struct ethtool_wolinfo *wol)
{
struct net_device *p = ds->dst->cpu_dp->netdev;
struct net_device *p = ds->ports[port].cpu_dp->netdev;
struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
struct ethtool_wolinfo pwol;
......@@ -684,9 +684,9 @@ static void bcm_sf2_sw_get_wol(struct dsa_switch *ds, int port,
static int bcm_sf2_sw_set_wol(struct dsa_switch *ds, int port,
struct ethtool_wolinfo *wol)
{
struct net_device *p = ds->dst->cpu_dp->netdev;
struct net_device *p = ds->ports[port].cpu_dp->netdev;
struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
s8 cpu_port = ds->dst->cpu_dp->index;
s8 cpu_port = ds->ports[port].cpu_dp->index;
struct ethtool_wolinfo pwol;
p->ethtool_ops->get_wol(p, &pwol);
......
......@@ -928,11 +928,11 @@ mt7530_setup(struct dsa_switch *ds)
struct device_node *dn;
struct mt7530_dummy_poll p;
/* The parent node of cpu_dp->netdev which holds the common system
/* The parent node of master netdev which holds the common system
* controller also is the container for two GMACs nodes representing
* as two netdev instances.
*/
dn = ds->dst->cpu_dp->netdev->dev.of_node->parent;
dn = ds->ports[MT7530_CPU_PORT].netdev->dev.of_node->parent;
priv->ethernet = syscon_node_to_regmap(dn);
if (IS_ERR(priv->ethernet))
return PTR_ERR(priv->ethernet);
......
......@@ -176,7 +176,7 @@ static int mv88e6060_setup_port(struct dsa_switch *ds, int p)
((p & 0xf) << PORT_VLAN_MAP_DBNUM_SHIFT) |
(dsa_is_cpu_port(ds, p) ?
ds->enabled_port_mask :
BIT(ds->dst->cpu_dp->index)));
BIT(ds->ports[p].cpu_dp->index)));
/* Port Association Vector: when learning source addresses
* of packets, add the address to the address database using
......
......@@ -506,7 +506,7 @@ qca8k_setup(struct dsa_switch *ds)
pr_warn("regmap initialization failed");
/* Initialize CPU port pad mode (xMII type, delays...) */
phy_mode = of_get_phy_mode(ds->dst->cpu_dp->dn);
phy_mode = of_get_phy_mode(ds->ports[QCA8K_CPU_PORT].dn);
if (phy_mode < 0) {
pr_err("Can't find phy-mode for master device\n");
return phy_mode;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment