Commit 0afa0724 authored by Mark Brown's avatar Mark Brown

Merge remote-tracking branches 'spi/topic/armada', 'spi/topic/ath79',...

Merge remote-tracking branches 'spi/topic/armada', 'spi/topic/ath79', 'spi/topic/atmel' and 'spi/topic/axi' into spi-next
* Marvell Armada 3700 SPI Controller
Required Properties:
- compatible: should be "marvell,armada-3700-spi"
- reg: physical base address of the controller and length of memory mapped
region.
- interrupts: The interrupt number. The interrupt specifier format depends on
the interrupt controller and of its driver.
- clocks: Must contain the clock source, usually from the North Bridge clocks.
- num-cs: The number of chip selects that is supported by this SPI Controller
- #address-cells: should be 1.
- #size-cells: should be 0.
Example:
spi0: spi@10600 {
compatible = "marvell,armada-3700-spi";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x10600 0x5d>;
clocks = <&nb_perih_clk 7>;
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
num-cs = <4>;
};
...@@ -67,6 +67,13 @@ config SPI_ATH79 ...@@ -67,6 +67,13 @@ config SPI_ATH79
This enables support for the SPI controller present on the This enables support for the SPI controller present on the
Atheros AR71XX/AR724X/AR913X SoCs. Atheros AR71XX/AR724X/AR913X SoCs.
config SPI_ARMADA_3700
tristate "Marvell Armada 3700 SPI Controller"
depends on (ARCH_MVEBU && OF) || COMPILE_TEST
help
This enables support for the SPI controller present on the
Marvell Armada 3700 SoCs.
config SPI_ATMEL config SPI_ATMEL
tristate "Atmel SPI Controller" tristate "Atmel SPI Controller"
depends on HAS_DMA depends on HAS_DMA
......
...@@ -12,6 +12,7 @@ obj-$(CONFIG_SPI_LOOPBACK_TEST) += spi-loopback-test.o ...@@ -12,6 +12,7 @@ obj-$(CONFIG_SPI_LOOPBACK_TEST) += spi-loopback-test.o
# SPI master controller drivers (bus) # SPI master controller drivers (bus)
obj-$(CONFIG_SPI_ALTERA) += spi-altera.o obj-$(CONFIG_SPI_ALTERA) += spi-altera.o
obj-$(CONFIG_SPI_ARMADA_3700) += spi-armada-3700.o
obj-$(CONFIG_SPI_ATMEL) += spi-atmel.o obj-$(CONFIG_SPI_ATMEL) += spi-atmel.o
obj-$(CONFIG_SPI_ATH79) += spi-ath79.o obj-$(CONFIG_SPI_ATH79) += spi-ath79.o
obj-$(CONFIG_SPI_AU1550) += spi-au1550.o obj-$(CONFIG_SPI_AU1550) += spi-au1550.o
......
This diff is collapsed.
...@@ -304,6 +304,7 @@ static const struct of_device_id ath79_spi_of_match[] = { ...@@ -304,6 +304,7 @@ static const struct of_device_id ath79_spi_of_match[] = {
{ .compatible = "qca,ar7100-spi", }, { .compatible = "qca,ar7100-spi", },
{ }, { },
}; };
MODULE_DEVICE_TABLE(of, ath79_spi_of_match);
static struct platform_driver ath79_spi_driver = { static struct platform_driver ath79_spi_driver = {
.probe = ath79_spi_probe, .probe = ath79_spi_probe,
......
This diff is collapsed.
...@@ -574,6 +574,7 @@ static const struct of_device_id spi_engine_match_table[] = { ...@@ -574,6 +574,7 @@ static const struct of_device_id spi_engine_match_table[] = {
{ .compatible = "adi,axi-spi-engine-1.00.a" }, { .compatible = "adi,axi-spi-engine-1.00.a" },
{ }, { },
}; };
MODULE_DEVICE_TABLE(of, spi_engine_match_table);
static struct platform_driver spi_engine_driver = { static struct platform_driver spi_engine_driver = {
.probe = spi_engine_probe, .probe = spi_engine_probe,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment