Commit 0b4954c4 authored by Linus Torvalds's avatar Linus Torvalds

Merge tag 'pwm/for-3.19-rc1' of...

Merge tag 'pwm/for-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm

Pull pwm updates from Thierry Reding:
 "There are two new drivers, one for the BCM2835 (Raspberry Pi) and one
  used in conjunction with the LCD controller on various Atmel SoCs.
  The Samsung PWM driver can now be built for 64-bit ARM (Exynos7).

  A couple of fixes have been applied to the FTM PWM driver and system
  sleep support was added"

* tag 'pwm/for-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
  pwm: atmel-hlcdc: add at91sam9x5 and sama5d3 errata handling
  pwm: ftm: Add Power Management support for FTM PWM
  pwm: ftm: Add regmap rbtree type cache support
  pwm: ftm: Correctly track usage count
  pwm: samsung: Allow Samsung PWM driver to be enabled on Exynos7
  pwm: add DT bindings documentation for atmel-hlcdc-pwm driver
  pwm: add support for atmel-hlcdc-pwm device
  pwm: Add BCM2835 PWM driver
parents d797da41 39e046f2
Device-Tree bindings for Atmel's HLCDC (High-end LCD Controller) PWM driver
The Atmel HLCDC PWM is subdevice of the HLCDC MFD device.
See ../mfd/atmel-hlcdc.txt for more details.
Required properties:
- compatible: value should be one of the following:
"atmel,hlcdc-pwm"
- pinctr-names: the pin control state names. Should contain "default".
- pinctrl-0: should contain the pinctrl states described by pinctrl
default.
- #pwm-cells: should be set to 3. This PWM chip use the default 3 cells
bindings defined in pwm.txt in this directory.
Example:
hlcdc: hlcdc@f0030000 {
compatible = "atmel,sama5d3-hlcdc";
reg = <0xf0030000 0x2000>;
clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
clock-names = "periph_clk","sys_clk", "slow_clk";
hlcdc_pwm: hlcdc-pwm {
compatible = "atmel,hlcdc-pwm";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lcd_pwm>;
#pwm-cells = <3>;
};
};
BCM2835 PWM controller (Raspberry Pi controller)
Required properties:
- compatible: should be "brcm,bcm2835-pwm"
- reg: physical base address and length of the controller's registers
- clock: This clock defines the base clock frequency of the PWM hardware
system, the period and the duty_cycle of the PWM signal is a multiple of
the base period.
- #pwm-cells: Should be 2. See pwm.txt in this directory for a description of
the cells format.
Examples:
pwm@2020c000 {
compatible = "brcm,bcm2835-pwm";
reg = <0x2020c000 0x28>;
clocks = <&clk_pwm>;
#pwm-cells = <2>;
};
clocks {
....
clk_pwm: pwm {
compatible = "fixed-clock";
reg = <3>;
#clock-cells = <0>;
clock-frequency = <9200000>;
};
....
};
...@@ -50,6 +50,17 @@ config PWM_ATMEL ...@@ -50,6 +50,17 @@ config PWM_ATMEL
To compile this driver as a module, choose M here: the module To compile this driver as a module, choose M here: the module
will be called pwm-atmel. will be called pwm-atmel.
config PWM_ATMEL_HLCDC_PWM
tristate "Atmel HLCDC PWM support"
depends on MFD_ATMEL_HLCDC
help
Generic PWM framework driver for the PWM output of the HLCDC
(Atmel High-end LCD Controller). This PWM output is mainly used
to control the LCD backlight.
To compile this driver as a module, choose M here: the module
will be called pwm-atmel-hlcdc.
config PWM_ATMEL_TCB config PWM_ATMEL_TCB
tristate "Atmel TC Block PWM support" tristate "Atmel TC Block PWM support"
depends on ATMEL_TCLIB && OF depends on ATMEL_TCLIB && OF
...@@ -71,6 +82,15 @@ config PWM_BCM_KONA ...@@ -71,6 +82,15 @@ config PWM_BCM_KONA
To compile this driver as a module, choose M here: the module To compile this driver as a module, choose M here: the module
will be called pwm-bcm-kona. will be called pwm-bcm-kona.
config PWM_BCM2835
tristate "BCM2835 PWM support"
depends on ARCH_BCM2835
help
PWM framework driver for BCM2835 controller (Raspberry Pi)
To compile this driver as a module, choose M here: the module
will be called pwm-bcm2835.
config PWM_BFIN config PWM_BFIN
tristate "Blackfin PWM support" tristate "Blackfin PWM support"
depends on BFIN_GPTIMERS depends on BFIN_GPTIMERS
...@@ -235,7 +255,7 @@ config PWM_ROCKCHIP ...@@ -235,7 +255,7 @@ config PWM_ROCKCHIP
config PWM_SAMSUNG config PWM_SAMSUNG
tristate "Samsung PWM support" tristate "Samsung PWM support"
depends on PLAT_SAMSUNG depends on PLAT_SAMSUNG || ARCH_EXYNOS
help help
Generic PWM framework driver for Samsung. Generic PWM framework driver for Samsung.
......
...@@ -2,8 +2,10 @@ obj-$(CONFIG_PWM) += core.o ...@@ -2,8 +2,10 @@ obj-$(CONFIG_PWM) += core.o
obj-$(CONFIG_PWM_SYSFS) += sysfs.o obj-$(CONFIG_PWM_SYSFS) += sysfs.o
obj-$(CONFIG_PWM_AB8500) += pwm-ab8500.o obj-$(CONFIG_PWM_AB8500) += pwm-ab8500.o
obj-$(CONFIG_PWM_ATMEL) += pwm-atmel.o obj-$(CONFIG_PWM_ATMEL) += pwm-atmel.o
obj-$(CONFIG_PWM_ATMEL_HLCDC_PWM) += pwm-atmel-hlcdc.o
obj-$(CONFIG_PWM_ATMEL_TCB) += pwm-atmel-tcb.o obj-$(CONFIG_PWM_ATMEL_TCB) += pwm-atmel-tcb.o
obj-$(CONFIG_PWM_BCM_KONA) += pwm-bcm-kona.o obj-$(CONFIG_PWM_BCM_KONA) += pwm-bcm-kona.o
obj-$(CONFIG_PWM_BCM2835) += pwm-bcm2835.o
obj-$(CONFIG_PWM_BFIN) += pwm-bfin.o obj-$(CONFIG_PWM_BFIN) += pwm-bfin.o
obj-$(CONFIG_PWM_CLPS711X) += pwm-clps711x.o obj-$(CONFIG_PWM_CLPS711X) += pwm-clps711x.o
obj-$(CONFIG_PWM_EP93XX) += pwm-ep93xx.o obj-$(CONFIG_PWM_EP93XX) += pwm-ep93xx.o
......
/*
* Copyright (C) 2014 Free Electrons
* Copyright (C) 2014 Atmel
*
* Author: Boris BREZILLON <boris.brezillon@free-electrons.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/mfd/atmel-hlcdc.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/pwm.h>
#include <linux/regmap.h>
#define ATMEL_HLCDC_PWMCVAL_MASK GENMASK(15, 8)
#define ATMEL_HLCDC_PWMCVAL(x) (((x) << 8) & ATMEL_HLCDC_PWMCVAL_MASK)
#define ATMEL_HLCDC_PWMPOL BIT(4)
#define ATMEL_HLCDC_PWMPS_MASK GENMASK(2, 0)
#define ATMEL_HLCDC_PWMPS_MAX 0x6
#define ATMEL_HLCDC_PWMPS(x) ((x) & ATMEL_HLCDC_PWMPS_MASK)
struct atmel_hlcdc_pwm_errata {
bool slow_clk_erratum;
bool div1_clk_erratum;
};
struct atmel_hlcdc_pwm {
struct pwm_chip chip;
struct atmel_hlcdc *hlcdc;
struct clk *cur_clk;
const struct atmel_hlcdc_pwm_errata *errata;
};
static inline struct atmel_hlcdc_pwm *to_atmel_hlcdc_pwm(struct pwm_chip *chip)
{
return container_of(chip, struct atmel_hlcdc_pwm, chip);
}
static int atmel_hlcdc_pwm_config(struct pwm_chip *c,
struct pwm_device *pwm,
int duty_ns, int period_ns)
{
struct atmel_hlcdc_pwm *chip = to_atmel_hlcdc_pwm(c);
struct atmel_hlcdc *hlcdc = chip->hlcdc;
struct clk *new_clk = hlcdc->slow_clk;
u64 pwmcval = duty_ns * 256;
unsigned long clk_freq;
u64 clk_period_ns;
u32 pwmcfg;
int pres;
if (!chip->errata || !chip->errata->slow_clk_erratum) {
clk_freq = clk_get_rate(new_clk);
clk_period_ns = (u64)NSEC_PER_SEC * 256;
do_div(clk_period_ns, clk_freq);
}
/* Errata: cannot use slow clk on some IP revisions */
if ((chip->errata && chip->errata->slow_clk_erratum) ||
clk_period_ns > period_ns) {
new_clk = hlcdc->sys_clk;
clk_freq = clk_get_rate(new_clk);
clk_period_ns = (u64)NSEC_PER_SEC * 256;
do_div(clk_period_ns, clk_freq);
}
for (pres = 0; pres <= ATMEL_HLCDC_PWMPS_MAX; pres++) {
/* Errata: cannot divide by 1 on some IP revisions */
if (!pres && chip->errata && chip->errata->div1_clk_erratum)
continue;
if ((clk_period_ns << pres) >= period_ns)
break;
}
if (pres > ATMEL_HLCDC_PWMPS_MAX)
return -EINVAL;
pwmcfg = ATMEL_HLCDC_PWMPS(pres);
if (new_clk != chip->cur_clk) {
u32 gencfg = 0;
int ret;
ret = clk_prepare_enable(new_clk);
if (ret)
return ret;
clk_disable_unprepare(chip->cur_clk);
chip->cur_clk = new_clk;
if (new_clk == hlcdc->sys_clk)
gencfg = ATMEL_HLCDC_CLKPWMSEL;
ret = regmap_update_bits(hlcdc->regmap, ATMEL_HLCDC_CFG(0),
ATMEL_HLCDC_CLKPWMSEL, gencfg);
if (ret)
return ret;
}
do_div(pwmcval, period_ns);
/*
* The PWM duty cycle is configurable from 0/256 to 255/256 of the
* period cycle. Hence we can't set a duty cycle occupying the
* whole period cycle if we're asked to.
* Set it to 255 if pwmcval is greater than 256.
*/
if (pwmcval > 255)
pwmcval = 255;
pwmcfg |= ATMEL_HLCDC_PWMCVAL(pwmcval);
return regmap_update_bits(hlcdc->regmap, ATMEL_HLCDC_CFG(6),
ATMEL_HLCDC_PWMCVAL_MASK |
ATMEL_HLCDC_PWMPS_MASK,
pwmcfg);
}
static int atmel_hlcdc_pwm_set_polarity(struct pwm_chip *c,
struct pwm_device *pwm,
enum pwm_polarity polarity)
{
struct atmel_hlcdc_pwm *chip = to_atmel_hlcdc_pwm(c);
struct atmel_hlcdc *hlcdc = chip->hlcdc;
u32 cfg = 0;
if (polarity == PWM_POLARITY_NORMAL)
cfg = ATMEL_HLCDC_PWMPOL;
return regmap_update_bits(hlcdc->regmap, ATMEL_HLCDC_CFG(6),
ATMEL_HLCDC_PWMPOL, cfg);
}
static int atmel_hlcdc_pwm_enable(struct pwm_chip *c, struct pwm_device *pwm)
{
struct atmel_hlcdc_pwm *chip = to_atmel_hlcdc_pwm(c);
struct atmel_hlcdc *hlcdc = chip->hlcdc;
u32 status;
int ret;
ret = regmap_write(hlcdc->regmap, ATMEL_HLCDC_EN, ATMEL_HLCDC_PWM);
if (ret)
return ret;
while (true) {
ret = regmap_read(hlcdc->regmap, ATMEL_HLCDC_SR, &status);
if (ret)
return ret;
if ((status & ATMEL_HLCDC_PWM) != 0)
break;
usleep_range(1, 10);
}
return 0;
}
static void atmel_hlcdc_pwm_disable(struct pwm_chip *c,
struct pwm_device *pwm)
{
struct atmel_hlcdc_pwm *chip = to_atmel_hlcdc_pwm(c);
struct atmel_hlcdc *hlcdc = chip->hlcdc;
u32 status;
int ret;
ret = regmap_write(hlcdc->regmap, ATMEL_HLCDC_DIS, ATMEL_HLCDC_PWM);
if (ret)
return;
while (true) {
ret = regmap_read(hlcdc->regmap, ATMEL_HLCDC_SR, &status);
if (ret)
return;
if ((status & ATMEL_HLCDC_PWM) == 0)
break;
usleep_range(1, 10);
}
}
static const struct pwm_ops atmel_hlcdc_pwm_ops = {
.config = atmel_hlcdc_pwm_config,
.set_polarity = atmel_hlcdc_pwm_set_polarity,
.enable = atmel_hlcdc_pwm_enable,
.disable = atmel_hlcdc_pwm_disable,
.owner = THIS_MODULE,
};
static const struct atmel_hlcdc_pwm_errata atmel_hlcdc_pwm_at91sam9x5_errata = {
.slow_clk_erratum = true,
};
static const struct atmel_hlcdc_pwm_errata atmel_hlcdc_pwm_sama5d3_errata = {
.div1_clk_erratum = true,
};
static const struct of_device_id atmel_hlcdc_dt_ids[] = {
{
.compatible = "atmel,at91sam9x5-hlcdc",
.data = &atmel_hlcdc_pwm_at91sam9x5_errata,
},
{
.compatible = "atmel,sama5d3-hlcdc",
.data = &atmel_hlcdc_pwm_sama5d3_errata,
},
{ /* sentinel */ },
};
static int atmel_hlcdc_pwm_probe(struct platform_device *pdev)
{
const struct of_device_id *match;
struct device *dev = &pdev->dev;
struct atmel_hlcdc_pwm *chip;
struct atmel_hlcdc *hlcdc;
int ret;
hlcdc = dev_get_drvdata(dev->parent);
chip = devm_kzalloc(dev, sizeof(*chip), GFP_KERNEL);
if (!chip)
return -ENOMEM;
ret = clk_prepare_enable(hlcdc->periph_clk);
if (ret)
return ret;
match = of_match_node(atmel_hlcdc_dt_ids, dev->parent->of_node);
if (match)
chip->errata = match->data;
chip->hlcdc = hlcdc;
chip->chip.ops = &atmel_hlcdc_pwm_ops;
chip->chip.dev = dev;
chip->chip.base = -1;
chip->chip.npwm = 1;
chip->chip.of_xlate = of_pwm_xlate_with_flags;
chip->chip.of_pwm_n_cells = 3;
chip->chip.can_sleep = 1;
ret = pwmchip_add(&chip->chip);
if (ret) {
clk_disable_unprepare(hlcdc->periph_clk);
return ret;
}
platform_set_drvdata(pdev, chip);
return 0;
}
static int atmel_hlcdc_pwm_remove(struct platform_device *pdev)
{
struct atmel_hlcdc_pwm *chip = platform_get_drvdata(pdev);
int ret;
ret = pwmchip_remove(&chip->chip);
if (ret)
return ret;
clk_disable_unprepare(chip->hlcdc->periph_clk);
return 0;
}
static const struct of_device_id atmel_hlcdc_pwm_dt_ids[] = {
{ .compatible = "atmel,hlcdc-pwm" },
{ /* sentinel */ },
};
static struct platform_driver atmel_hlcdc_pwm_driver = {
.driver = {
.name = "atmel-hlcdc-pwm",
.of_match_table = atmel_hlcdc_pwm_dt_ids,
},
.probe = atmel_hlcdc_pwm_probe,
.remove = atmel_hlcdc_pwm_remove,
};
module_platform_driver(atmel_hlcdc_pwm_driver);
MODULE_ALIAS("platform:atmel-hlcdc-pwm");
MODULE_AUTHOR("Boris Brezillon <boris.brezillon@free-electrons.com>");
MODULE_DESCRIPTION("Atmel HLCDC PWM driver");
MODULE_LICENSE("GPL v2");
/*
* Copyright 2014 Bart Tanghe <bart.tanghe@thomasmore.be>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2.
*/
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/pwm.h>
#define PWM_CONTROL 0x000
#define PWM_CONTROL_SHIFT(x) ((x) * 8)
#define PWM_CONTROL_MASK 0xff
#define PWM_MODE 0x80 /* set timer in PWM mode */
#define PWM_ENABLE (1 << 0)
#define PWM_POLARITY (1 << 4)
#define PERIOD(x) (((x) * 0x10) + 0x10)
#define DUTY(x) (((x) * 0x10) + 0x14)
#define MIN_PERIOD 108 /* 9.2 MHz max. PWM clock */
struct bcm2835_pwm {
struct pwm_chip chip;
struct device *dev;
unsigned long scaler;
void __iomem *base;
struct clk *clk;
};
static inline struct bcm2835_pwm *to_bcm2835_pwm(struct pwm_chip *chip)
{
return container_of(chip, struct bcm2835_pwm, chip);
}
static int bcm2835_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
{
struct bcm2835_pwm *pc = to_bcm2835_pwm(chip);
u32 value;
value = readl(pc->base + PWM_CONTROL);
value &= ~(PWM_CONTROL_MASK << PWM_CONTROL_SHIFT(pwm->hwpwm));
value |= (PWM_MODE << PWM_CONTROL_SHIFT(pwm->hwpwm));
writel(value, pc->base + PWM_CONTROL);
return 0;
}
static void bcm2835_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
{
struct bcm2835_pwm *pc = to_bcm2835_pwm(chip);
u32 value;
value = readl(pc->base + PWM_CONTROL);
value &= ~(PWM_CONTROL_MASK << PWM_CONTROL_SHIFT(pwm->hwpwm));
writel(value, pc->base + PWM_CONTROL);
}
static int bcm2835_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
int duty_ns, int period_ns)
{
struct bcm2835_pwm *pc = to_bcm2835_pwm(chip);
if (period_ns <= MIN_PERIOD) {
dev_err(pc->dev, "period %d not supported, minimum %d\n",
period_ns, MIN_PERIOD);
return -EINVAL;
}
writel(duty_ns / pc->scaler, pc->base + DUTY(pwm->hwpwm));
writel(period_ns / pc->scaler, pc->base + PERIOD(pwm->hwpwm));
return 0;
}
static int bcm2835_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
{
struct bcm2835_pwm *pc = to_bcm2835_pwm(chip);
u32 value;
value = readl(pc->base + PWM_CONTROL);
value |= PWM_ENABLE << PWM_CONTROL_SHIFT(pwm->hwpwm);
writel(value, pc->base + PWM_CONTROL);
return 0;
}
static void bcm2835_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
{
struct bcm2835_pwm *pc = to_bcm2835_pwm(chip);
u32 value;
value = readl(pc->base + PWM_CONTROL);
value &= ~(PWM_ENABLE << PWM_CONTROL_SHIFT(pwm->hwpwm));
writel(value, pc->base + PWM_CONTROL);
}
static int bcm2835_set_polarity(struct pwm_chip *chip, struct pwm_device *pwm,
enum pwm_polarity polarity)
{
struct bcm2835_pwm *pc = to_bcm2835_pwm(chip);
u32 value;
value = readl(pc->base + PWM_CONTROL);
if (polarity == PWM_POLARITY_NORMAL)
value &= ~(PWM_POLARITY << PWM_CONTROL_SHIFT(pwm->hwpwm));
else
value |= PWM_POLARITY << PWM_CONTROL_SHIFT(pwm->hwpwm);
writel(value, pc->base + PWM_CONTROL);
return 0;
}
static const struct pwm_ops bcm2835_pwm_ops = {
.request = bcm2835_pwm_request,
.free = bcm2835_pwm_free,
.config = bcm2835_pwm_config,
.enable = bcm2835_pwm_enable,
.disable = bcm2835_pwm_disable,
.set_polarity = bcm2835_set_polarity,
.owner = THIS_MODULE,
};
static int bcm2835_pwm_probe(struct platform_device *pdev)
{
struct bcm2835_pwm *pc;
struct resource *res;
int ret;
pc = devm_kzalloc(&pdev->dev, sizeof(*pc), GFP_KERNEL);
if (!pc)
return -ENOMEM;
pc->dev = &pdev->dev;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
pc->base = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(pc->base))
return PTR_ERR(pc->base);
pc->clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(pc->clk)) {
dev_err(&pdev->dev, "clock not found: %ld\n", PTR_ERR(pc->clk));
return PTR_ERR(pc->clk);
}
ret = clk_prepare_enable(pc->clk);
if (ret)
return ret;
pc->scaler = NSEC_PER_SEC / clk_get_rate(pc->clk);
pc->chip.dev = &pdev->dev;
pc->chip.ops = &bcm2835_pwm_ops;
pc->chip.npwm = 2;
platform_set_drvdata(pdev, pc);
ret = pwmchip_add(&pc->chip);
if (ret < 0)
goto add_fail;
return 0;
add_fail:
clk_disable_unprepare(pc->clk);
return ret;
}
static int bcm2835_pwm_remove(struct platform_device *pdev)
{
struct bcm2835_pwm *pc = platform_get_drvdata(pdev);
clk_disable_unprepare(pc->clk);
return pwmchip_remove(&pc->chip);
}
static const struct of_device_id bcm2835_pwm_of_match[] = {
{ .compatible = "brcm,bcm2835-pwm", },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, bcm2835_pwm_of_match);
static struct platform_driver bcm2835_pwm_driver = {
.driver = {
.name = "bcm2835-pwm",
.of_match_table = bcm2835_pwm_of_match,
},
.probe = bcm2835_pwm_probe,
.remove = bcm2835_pwm_remove,
};
module_platform_driver(bcm2835_pwm_driver);
MODULE_AUTHOR("Bart Tanghe <bart.tanghe@thomasmore.be");
MODULE_DESCRIPTION("Broadcom BCM2835 PWM driver");
MODULE_LICENSE("GPL v2");
...@@ -17,6 +17,7 @@ ...@@ -17,6 +17,7 @@
#include <linux/mutex.h> #include <linux/mutex.h>
#include <linux/of_address.h> #include <linux/of_address.h>
#include <linux/platform_device.h> #include <linux/platform_device.h>
#include <linux/pm.h>
#include <linux/pwm.h> #include <linux/pwm.h>
#include <linux/regmap.h> #include <linux/regmap.h>
#include <linux/slab.h> #include <linux/slab.h>
...@@ -299,7 +300,7 @@ static int fsl_counter_clock_enable(struct fsl_pwm_chip *fpc) ...@@ -299,7 +300,7 @@ static int fsl_counter_clock_enable(struct fsl_pwm_chip *fpc)
{ {
int ret; int ret;
if (fpc->use_count != 0) if (fpc->use_count++ != 0)
return 0; return 0;
/* select counter clock source */ /* select counter clock source */
...@@ -316,8 +317,6 @@ static int fsl_counter_clock_enable(struct fsl_pwm_chip *fpc) ...@@ -316,8 +317,6 @@ static int fsl_counter_clock_enable(struct fsl_pwm_chip *fpc)
return ret; return ret;
} }
fpc->use_count++;
return 0; return 0;
} }
...@@ -399,12 +398,23 @@ static int fsl_pwm_init(struct fsl_pwm_chip *fpc) ...@@ -399,12 +398,23 @@ static int fsl_pwm_init(struct fsl_pwm_chip *fpc)
return 0; return 0;
} }
static bool fsl_pwm_volatile_reg(struct device *dev, unsigned int reg)
{
switch (reg) {
case FTM_CNT:
return true;
}
return false;
}
static const struct regmap_config fsl_pwm_regmap_config = { static const struct regmap_config fsl_pwm_regmap_config = {
.reg_bits = 32, .reg_bits = 32,
.reg_stride = 4, .reg_stride = 4,
.val_bits = 32, .val_bits = 32,
.max_register = FTM_PWMLOAD, .max_register = FTM_PWMLOAD,
.volatile_reg = fsl_pwm_volatile_reg,
.cache_type = REGCACHE_RBTREE,
}; };
static int fsl_pwm_probe(struct platform_device *pdev) static int fsl_pwm_probe(struct platform_device *pdev)
...@@ -427,7 +437,7 @@ static int fsl_pwm_probe(struct platform_device *pdev) ...@@ -427,7 +437,7 @@ static int fsl_pwm_probe(struct platform_device *pdev)
if (IS_ERR(base)) if (IS_ERR(base))
return PTR_ERR(base); return PTR_ERR(base);
fpc->regmap = devm_regmap_init_mmio_clk(&pdev->dev, NULL, base, fpc->regmap = devm_regmap_init_mmio_clk(&pdev->dev, "ftm_sys", base,
&fsl_pwm_regmap_config); &fsl_pwm_regmap_config);
if (IS_ERR(fpc->regmap)) { if (IS_ERR(fpc->regmap)) {
dev_err(&pdev->dev, "regmap init failed\n"); dev_err(&pdev->dev, "regmap init failed\n");
...@@ -478,6 +488,51 @@ static int fsl_pwm_remove(struct platform_device *pdev) ...@@ -478,6 +488,51 @@ static int fsl_pwm_remove(struct platform_device *pdev)
return pwmchip_remove(&fpc->chip); return pwmchip_remove(&fpc->chip);
} }
#ifdef CONFIG_PM_SLEEP
static int fsl_pwm_suspend(struct device *dev)
{
struct fsl_pwm_chip *fpc = dev_get_drvdata(dev);
u32 val;
regcache_cache_only(fpc->regmap, true);
regcache_mark_dirty(fpc->regmap);
/* read from cache */
regmap_read(fpc->regmap, FTM_OUTMASK, &val);
if ((val & 0xFF) != 0xFF) {
clk_disable_unprepare(fpc->clk[FSL_PWM_CLK_CNTEN]);
clk_disable_unprepare(fpc->clk[fpc->cnt_select]);
clk_disable_unprepare(fpc->clk[FSL_PWM_CLK_SYS]);
}
return 0;
}
static int fsl_pwm_resume(struct device *dev)
{
struct fsl_pwm_chip *fpc = dev_get_drvdata(dev);
u32 val;
/* read from cache */
regmap_read(fpc->regmap, FTM_OUTMASK, &val);
if ((val & 0xFF) != 0xFF) {
clk_prepare_enable(fpc->clk[FSL_PWM_CLK_SYS]);
clk_prepare_enable(fpc->clk[fpc->cnt_select]);
clk_prepare_enable(fpc->clk[FSL_PWM_CLK_CNTEN]);
}
/* restore all registers from cache */
regcache_cache_only(fpc->regmap, false);
regcache_sync(fpc->regmap);
return 0;
}
#endif
static const struct dev_pm_ops fsl_pwm_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(fsl_pwm_suspend, fsl_pwm_resume)
};
static const struct of_device_id fsl_pwm_dt_ids[] = { static const struct of_device_id fsl_pwm_dt_ids[] = {
{ .compatible = "fsl,vf610-ftm-pwm", }, { .compatible = "fsl,vf610-ftm-pwm", },
{ /* sentinel */ } { /* sentinel */ }
...@@ -488,6 +543,7 @@ static struct platform_driver fsl_pwm_driver = { ...@@ -488,6 +543,7 @@ static struct platform_driver fsl_pwm_driver = {
.driver = { .driver = {
.name = "fsl-ftm-pwm", .name = "fsl-ftm-pwm",
.of_match_table = fsl_pwm_dt_ids, .of_match_table = fsl_pwm_dt_ids,
.pm = &fsl_pwm_pm_ops,
}, },
.probe = fsl_pwm_probe, .probe = fsl_pwm_probe,
.remove = fsl_pwm_remove, .remove = fsl_pwm_remove,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment