fbdev: Add support for the nomodeset kernel parameter

Support the kernel's nomodeset parameter for all PCI-based fbdev
drivers that use aperture helpers to remove other, hardware-agnostic
graphics drivers.

The parameter is a simple way of using the firmware-provided scanout
buffer if the hardware's native driver is broken. The same effect
could be achieved with per-driver options, but the importance of the
graphics output for many users makes a single, unified approach
worthwhile.

With nomodeset specified, the fbdev driver module will not load. This
unifies behavior with similar DRM drivers. In DRM helpers, modules
first check the nomodeset parameter before registering the PCI
driver. As fbdev has no such module helpers, we have to modify each
driver individually.

The name 'nomodeset' is slightly misleading, but has been chosen for
historical reasons. Several drivers implemented it before it became a
general option for DRM. So keeping the existing name was preferred over
introducing a new one.

v2:
	* print a warning if a driver does not init (Helge)
	* wrap video_firmware_drivers_only() in helper
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221111133024.9897-3-tzimmermann@suse.de

drivers/staging/sm750fb/Kconfig

@@ -6,6 +6,7 @@ config FB_SM750
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
+	select VIDEO_NOMODESET
 	help
 	  Frame buffer driver for the Silicon Motion SM750 chip
 	  with 2D accelearion and dual head support.

drivers/staging/sm750fb/sm750.c

@@ -1168,6 +1168,9 @@ static int __init lynxfb_init(void)
 {
 	char *option;
 
+	if (fb_modesetting_disabled("sm750fb"))
+		return -ENODEV;
+
 #ifdef MODULE
 	option = g_option;
 #else

drivers/video/fbdev/Kconfig

@@ -227,6 +227,7 @@ config FB_CIRRUS
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
+	select VIDEO_NOMODESET
 	help
 	  This enables support for Cirrus Logic GD542x/543x based boards on
 	  Amiga: SD64, Piccolo, Picasso II/II+, Picasso IV, or EGS Spectrum.
@@ -245,6 +246,7 @@ config FB_PM2
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
+	select VIDEO_NOMODESET
 	help
 	  This is the frame buffer device driver for cards based on
 	  the 3D Labs Permedia, Permedia 2 and Permedia 2V chips.
@@ -340,6 +342,7 @@ config FB_CYBER2000
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
+	select VIDEO_NOMODESET
 	help
 	  This enables support for the Integraphics CyberPro 20x0 and 5000
 	  VGA chips used in the Rebel.com Netwinder and other machines.
@@ -504,6 +507,7 @@ config FB_CT65550
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
+	select VIDEO_NOMODESET
 	help
 	  This is the frame buffer device driver for the Chips & Technologies
 	  65550 graphics chip in PowerBooks.
@@ -514,6 +518,7 @@ config FB_ASILIANT
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
+	select VIDEO_NOMODESET
 	help
 	  This is the frame buffer device driver for the Asiliant 69030 chipset
 
@@ -522,6 +527,7 @@ config FB_IMSTT
 	depends on (FB = y) && PCI
 	select FB_CFB_IMAGEBLIT
 	select FB_MACMODES if PPC_PMAC
+	select VIDEO_NOMODESET
 	help
 	  The IMS Twin Turbo is a PCI-based frame buffer card bundled with
 	  many Macintosh and compatible computers.
@@ -585,6 +591,7 @@ config FB_TGA
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
 	select BITREVERSE
+	select VIDEO_NOMODESET
 	help
 	  This is the frame buffer device driver for generic TGA and SFB+
 	  graphic cards.  These include DEC ZLXp-E1, -E2 and -E3 PCI cards,
@@ -777,6 +784,7 @@ config FB_XVR500
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
+	select VIDEO_NOMODESET
 	help
 	  This is the framebuffer device for the Sun XVR-500 and similar
 	  graphics cards based upon the 3DLABS Wildcat chipset.  The driver
@@ -790,6 +798,7 @@ config FB_XVR2500
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
+	select VIDEO_NOMODESET
 	help
 	  This is the framebuffer device for the Sun XVR-2500 and similar
 	  graphics cards based upon the 3DLABS Wildcat chipset.  The driver
@@ -816,6 +825,7 @@ config FB_PVR2
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
+	select VIDEO_NOMODESET
 	help
 	  Say Y here if you have a PowerVR 2 card in your box.  If you plan to
 	  run linux on your Dreamcast, you will have to say Y here.
@@ -881,6 +891,7 @@ config FB_NVIDIA
 	select FB_CFB_IMAGEBLIT
 	select BITREVERSE
 	select VGASTATE
+	select VIDEO_NOMODESET
 	help
 	  This driver supports graphics boards with the nVidia chips, TNT
 	  and newer. For very old chipsets, such as the RIVA128, then use
@@ -928,6 +939,7 @@ config FB_RIVA
 	select FB_CFB_IMAGEBLIT
 	select BITREVERSE
 	select VGASTATE
+	select VIDEO_NOMODESET
 	help
 	  This driver supports graphics boards with the nVidia Riva/Geforce
 	  chips.
@@ -972,6 +984,7 @@ config FB_I740
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
 	select VGASTATE
+	select VIDEO_NOMODESET
 	select FB_DDC
 	help
 	  This driver supports graphics cards based on Intel740 chip.
@@ -984,6 +997,7 @@ config FB_I810
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
 	select VGASTATE
+	select VIDEO_NOMODESET
 	help
 	  This driver supports the on-board graphics built in to the Intel 810
 	  and 815 chipsets.  Say Y if you have and plan to use such a board.
@@ -1034,6 +1048,7 @@ config FB_LE80578
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
+	select VIDEO_NOMODESET
 	help
 	  This driver supports the LE80578 (Vermilion Range) chipset
 
@@ -1051,6 +1066,7 @@ config FB_INTEL
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
 	select BOOT_VESA_SUPPORT if FB_INTEL = y
+	select VIDEO_NOMODESET
 	depends on !DRM_I915
 	help
 	  This driver supports the on-board graphics built in to the Intel
@@ -1088,6 +1104,7 @@ config FB_MATROX
 	select FB_CFB_IMAGEBLIT
 	select FB_TILEBLITTING
 	select FB_MACMODES if PPC_PMAC
+	select VIDEO_NOMODESET
 	help
 	  Say Y here if you have a Matrox Millennium, Matrox Millennium II,
 	  Matrox Mystique, Matrox Mystique 220, Matrox Productiva G100, Matrox
@@ -1208,6 +1225,7 @@ config FB_RADEON
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
 	select FB_MACMODES if PPC
+	select VIDEO_NOMODESET
 	help
 	  Choose this option if you want to use an ATI Radeon graphics card as
 	  a framebuffer device.  There are both PCI and AGP versions.  You
@@ -1247,6 +1265,7 @@ config FB_ATY128
 	select FB_CFB_IMAGEBLIT
 	select FB_BACKLIGHT if FB_ATY128_BACKLIGHT
 	select FB_MACMODES if PPC_PMAC
+	select VIDEO_NOMODESET
 	help
 	  This driver supports graphics boards with the ATI Rage128 chips.
 	  Say Y if you have such a graphics board and read
@@ -1271,6 +1290,7 @@ config FB_ATY
 	select FB_BACKLIGHT if FB_ATY_BACKLIGHT
 	select FB_MACMODES if PPC
 	select FB_ATY_CT if SPARC64 && PCI
+	select VIDEO_NOMODESET
 	help
 	  This driver supports graphics boards with the ATI Mach64 chips.
 	  Say Y if you have such a graphics board.
@@ -1321,6 +1341,7 @@ config FB_S3
 	select FB_TILEBLITTING
 	select FB_SVGALIB
 	select VGASTATE
+	select VIDEO_NOMODESET
 	select FONT_8x16 if FRAMEBUFFER_CONSOLE
 	help
 	  Driver for graphics boards with S3 Trio / S3 Virge chip.
@@ -1341,6 +1362,7 @@ config FB_SAVAGE
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
 	select VGASTATE
+	select VIDEO_NOMODESET
 	help
 	  This driver supports notebooks and computers with S3 Savage PCI/AGP
 	  chips.
@@ -1379,6 +1401,7 @@ config FB_SIS
 	select FB_CFB_IMAGEBLIT
 	select BOOT_VESA_SUPPORT if FB_SIS = y
 	select FB_SIS_300 if !FB_SIS_315
+	select VIDEO_NOMODESET
 	help
 	  This is the frame buffer device driver for the SiS 300, 315, 330
 	  and 340 series as well as XGI V3XT, V5, V8, Z7 graphics chipsets.
@@ -1408,6 +1431,7 @@ config FB_VIA
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
 	select I2C_ALGOBIT
+	select VIDEO_NOMODESET
 	help
 	  This is the frame buffer device driver for Graphics chips of VIA
 	  UniChrome (Pro) Family (CLE266,PM800/CN400,P4M800CE/P4M800Pro/
@@ -1447,6 +1471,7 @@ config FB_NEOMAGIC
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
 	select VGASTATE
+	select VIDEO_NOMODESET
 	help
 	  This driver supports notebooks with NeoMagic PCI chips.
 	  Say Y if you have such a graphics card.
@@ -1460,6 +1485,7 @@ config FB_KYRO
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
+	select VIDEO_NOMODESET
 	help
 	  Say Y here if you have a STG4000 / Kyro / PowerVR 3 based
 	  graphics board.
@@ -1474,6 +1500,7 @@ config FB_3DFX
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_MODE_HELPERS
+	select VIDEO_NOMODESET
 	help
 	  This driver supports graphics boards with the 3Dfx Banshee,
 	  Voodoo3 or VSA-100 (aka Voodoo4/5) chips. Say Y if you have
@@ -1503,6 +1530,7 @@ config FB_VOODOO1
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
+	select VIDEO_NOMODESET
 	help
 	  Say Y here if you have a 3Dfx Voodoo Graphics (Voodoo1/sst1) or
 	  Voodoo2 (cvg) based graphics card.
@@ -1524,6 +1552,7 @@ config FB_VT8623
 	select FB_TILEBLITTING
 	select FB_SVGALIB
 	select VGASTATE
+	select VIDEO_NOMODESET
 	select FONT_8x16 if FRAMEBUFFER_CONSOLE
 	help
 	  Driver for CastleRock integrated graphics core in the
@@ -1537,6 +1566,7 @@ config FB_TRIDENT
 	select FB_CFB_IMAGEBLIT
 	select FB_DDC
 	select FB_MODE_HELPERS
+	select VIDEO_NOMODESET
 	help
 	  This is the frame buffer device driver for Trident PCI/AGP chipsets.
 	  Supported chipset families are TGUI 9440/96XX, 3DImage, Blade3D
@@ -1560,6 +1590,7 @@ config FB_ARK
 	select FB_TILEBLITTING
 	select FB_SVGALIB
 	select VGASTATE
+	select VIDEO_NOMODESET
 	select FONT_8x16 if FRAMEBUFFER_CONSOLE
 	help
 	  Driver for PCI graphics boards with ARK 2000PV chip
@@ -1571,6 +1602,7 @@ config FB_PM3
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
+	select VIDEO_NOMODESET
 	help
 	  This is the frame buffer device driver for the 3DLabs Permedia3
 	  chipset, used in Formac ProFormance III, 3DLabs Oxygen VX1 &
@@ -1583,6 +1615,7 @@ config FB_CARMINE
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
+	select VIDEO_NOMODESET
 	help
 	  This is the frame buffer device driver for the Fujitsu Carmine chip.
 	  The driver provides two independent frame buffer devices.
@@ -1961,6 +1994,7 @@ config FB_IBM_GXT4500
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
+	select VIDEO_NOMODESET
 	help
 	  Say Y here to enable support for the IBM GXT4000P/6000P and
 	  GXT4500P/6500P display adaptor based on Raster Engine RC1000,
@@ -2101,6 +2135,7 @@ config FB_MB862XX
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
+	select VIDEO_NOMODESET
 	help
 	  Frame buffer driver for Fujitsu Carmine/Coral-P(A)/Lime controllers.
 
@@ -2188,6 +2223,7 @@ config FB_HYPERV
 	select FB_CFB_IMAGEBLIT
 	select FB_DEFERRED_IO
 	select DMA_CMA if HAVE_DMA_CONTIGUOUS && CMA
+	select VIDEO_NOMODESET
 	help
 	  This framebuffer driver supports Microsoft Hyper-V Synthetic Video.
 
@@ -2230,6 +2266,7 @@ config FB_SM712
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
+	select VIDEO_NOMODESET
 	help
 	  Frame buffer driver for the Silicon Motion SM710, SM712, SM721
 	  and SM722 chips.

drivers/video/fbdev/arkfb.c

@@ -1187,7 +1187,12 @@ static int __init arkfb_init(void)
 
 #ifndef MODULE
 	char *option = NULL;
+#endif
+
+	if (fb_modesetting_disabled("arkfb"))
+		return -ENODEV;
 
+#ifndef MODULE
 	if (fb_get_options("arkfb", &option))
 		return -ENODEV;
 

drivers/video/fbdev/asiliantfb.c

@@ -616,6 +616,9 @@ static struct pci_driver asiliantfb_driver = {
 
 static int __init asiliantfb_init(void)
 {
+	if (fb_modesetting_disabled("asiliantfb"))
+		return -ENODEV;
+
 	if (fb_get_options("asiliantfb", NULL))
 		return -ENODEV;
 

drivers/video/fbdev/aty/aty128fb.c

@@ -2503,7 +2503,12 @@ static int aty128fb_init(void)
 {
 #ifndef MODULE
 	char *option = NULL;
+#endif
+
+	if (fb_modesetting_disabled("aty128fb"))
+		return -ENODEV;
 
+#ifndef MODULE
 	if (fb_get_options("aty128fb", &option))
 		return -ENODEV;
 	aty128fb_setup(option);

drivers/video/fbdev/aty/atyfb_base.c

@@ -3965,7 +3965,12 @@ static int __init atyfb_init(void)
 	int err1 = 1, err2 = 1;
 #ifndef MODULE
 	char *option = NULL;
+#endif
+
+	if (fb_modesetting_disabled("atyfb"))
+		return -ENODEV;
 
+#ifndef MODULE
 	if (fb_get_options("atyfb", &option))
 		return -ENODEV;
 	atyfb_setup(option);

drivers/video/fbdev/aty/radeon_base.c

@@ -2607,7 +2607,12 @@ static int __init radeonfb_init (void)
 {
 #ifndef MODULE
 	char *option = NULL;
+#endif
+
+	if (fb_modesetting_disabled("radeonfb"))
+		return -ENODEV;
 
+#ifndef MODULE
 	if (fb_get_options("radeonfb", &option))
 		return -ENODEV;
 	radeonfb_setup(option);

drivers/video/fbdev/carminefb.c

@@ -773,6 +773,9 @@ static struct pci_driver carmine_pci_driver = {
 
 static int __init carminefb_init(void)
 {
+	if (fb_modesetting_disabled("carminefb"))
+		return -ENODEV;
+
 	if (!(fb_displays &
 		(CARMINE_USE_DISPLAY0 | CARMINE_USE_DISPLAY1))) {
 		printk(KERN_ERR "If you disable both displays than you don't "

drivers/video/fbdev/chipsfb.c

@@ -506,6 +506,9 @@ static struct pci_driver chipsfb_driver = {
 
 int __init chips_init(void)
 {
+	if (fb_modesetting_disabled("chipsfb"))
+		return -ENODEV;
+
 	if (fb_get_options("chipsfb", NULL))
 		return -ENODEV;
 

drivers/video/fbdev/cirrusfb.c

@@ -2359,7 +2359,12 @@ static int __init cirrusfb_init(void)
 
 #ifndef MODULE
 	char *option = NULL;
+#endif
+
+	if (fb_modesetting_disabled("cirrusfb"))
+		return -ENODEV;
 
+#ifndef MODULE
 	if (fb_get_options("cirrusfb", &option))
 		return -ENODEV;
 	cirrusfb_setup(option);

drivers/video/fbdev/core/fbmem.c

@@ -40,6 +40,7 @@
 
 #include <asm/fb.h>
 
+#include <video/nomodeset.h>
 #include <video/vga.h>
 
     /*
@@ -1844,4 +1845,18 @@ int fb_new_modelist(struct fb_info *info)
 	return 0;
 }
 
+#if defined(CONFIG_VIDEO_NOMODESET)
+bool fb_modesetting_disabled(const char *drvname)
+{
+	bool fwonly = video_firmware_drivers_only();
+
+	if (fwonly)
+		pr_warn("Driver %s not loading because of nomodeset parameter\n",
+			drvname);
+
+	return fwonly;
+}
+EXPORT_SYMBOL(fb_modesetting_disabled);
+#endif
+
 MODULE_LICENSE("GPL");

drivers/video/fbdev/cyber2000fb.c

@@ -48,7 +48,6 @@
 #include <linux/i2c.h>
 #include <linux/i2c-algo-bit.h>
 
-
 #ifdef __arm__
 #include <asm/mach-types.h>
 #endif
@@ -1876,7 +1875,12 @@ static int __init cyber2000fb_init(void)
 
 #ifndef MODULE
 	char *option = NULL;
+#endif
 
+	if (fb_modesetting_disabled("CyberPro"))
+		return -ENODEV;
+
+#ifndef MODULE
 	if (fb_get_options("cyber2000fb", &option))
 		return -ENODEV;
 	cyber2000fb_setup(option);

drivers/video/fbdev/geode/Kconfig

@@ -15,6 +15,7 @@ config FB_GEODE_LX
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
+	select VIDEO_NOMODESET
 	help
 	  Framebuffer driver for the display controller integrated into the
 	  AMD Geode LX processors.
@@ -30,6 +31,7 @@ config FB_GEODE_GX
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
+	select VIDEO_NOMODESET
 	help
 	  Framebuffer driver for the display controller integrated into the
 	  AMD Geode GX processors.
@@ -45,6 +47,7 @@ config FB_GEODE_GX1
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
+	select VIDEO_NOMODESET
 	help
 	  Framebuffer driver for the display controller integrated into the
 	  AMD Geode GX1 processor.

drivers/video/fbdev/geode/gx1fb_core.c

@@ -446,7 +446,12 @@ static int __init gx1fb_init(void)
 {
 #ifndef MODULE
 	char *option = NULL;
+#endif
+
+	if (fb_modesetting_disabled("gx1fb"))
+		return -ENODEV;
 
+#ifndef MODULE
 	if (fb_get_options("gx1fb", &option))
 		return -ENODEV;
 	gx1fb_setup(option);

drivers/video/fbdev/geode/gxfb_core.c

@@ -511,7 +511,12 @@ static int __init gxfb_init(void)
 {
 #ifndef MODULE
 	char *option = NULL;
+#endif
+
+	if (fb_modesetting_disabled("gxfb"))
+		return -ENODEV;
 
+#ifndef MODULE
 	if (fb_get_options("gxfb", &option))
 		return -ENODEV;
 

drivers/video/fbdev/geode/lxfb_core.c

@@ -647,7 +647,12 @@ static int __init lxfb_init(void)
 {
 #ifndef MODULE
 	char *option = NULL;
+#endif
+
+	if (fb_modesetting_disabled("lxfb"))
+		return -ENODEV;
 
+#ifndef MODULE
 	if (fb_get_options("lxfb", &option))
 		return -ENODEV;
 

drivers/video/fbdev/gxt4500.c

@@ -779,6 +779,9 @@ static struct pci_driver gxt4500_driver = {
 
 static int gxt4500_init(void)
 {
+	if (fb_modesetting_disabled("gxt4500"))
+		return -ENODEV;
+
 #ifndef MODULE
 	if (fb_get_options("gxt4500", &mode_option))
 		return -ENODEV;

drivers/video/fbdev/hyperv_fb.c

@@ -59,7 +59,6 @@
 
 #include <linux/hyperv.h>
 
-
 /* Hyper-V Synthetic Video Protocol definitions and structures */
 #define MAX_VMBUS_PKT_SIZE 0x4000
 
@@ -1363,6 +1362,9 @@ static int __init hvfb_drv_init(void)
 {
 	int ret;
 
+	if (fb_modesetting_disabled("hyper_fb"))
+		return -ENODEV;
+
 	ret = vmbus_driver_register(&hvfb_drv);
 	if (ret != 0)
 		return ret;

drivers/video/fbdev/i740fb.c

@@ -1285,7 +1285,12 @@ static int __init i740fb_init(void)
 {
 #ifndef MODULE
 	char *option = NULL;
+#endif
+
+	if (fb_modesetting_disabled("i740fb"))
+		return -ENODEV;
 
+#ifndef MODULE
 	if (fb_get_options("i740fb", &option))
 		return -ENODEV;
 	i740fb_setup(option);

drivers/video/fbdev/i810/i810_main.c

@@ -2143,6 +2143,9 @@ static int i810fb_init(void)
 {
 	char *option = NULL;
 
+	if (fb_modesetting_disabled("i810fb"))
+		return -ENODEV;
+
 	if (fb_get_options("i810fb", &option))
 		return -ENODEV;
 	i810fb_setup(option);
@@ -2159,6 +2162,9 @@ static int i810fb_init(void)
 
 static int i810fb_init(void)
 {
+	if (fb_modesetting_disabled("i810fb"))
+		return -ENODEV;
+
 	hsync1 *= 1000;
 	hsync2 *= 1000;
 

drivers/video/fbdev/imsttfb.c

@@ -1617,7 +1617,12 @@ static int __init imsttfb_init(void)
 {
 #ifndef MODULE
 	char *option = NULL;
+#endif
+
+	if (fb_modesetting_disabled("imsttfb"))
+		return -ENODEV;
 
+#ifndef MODULE
 	if (fb_get_options("imsttfb", &option))
 		return -ENODEV;
 

drivers/video/fbdev/intelfb/intelfbdrv.c

@@ -389,6 +389,9 @@ static int __init intelfb_init(void)
 	if (idonly)
 		return -ENODEV;
 
+	if (fb_modesetting_disabled("intelfb"))
+		return -ENODEV;
+
 #ifndef MODULE
 	if (fb_get_options("intelfb", &option))
 		return -ENODEV;

drivers/video/fbdev/kyro/fbdev.c

@@ -789,7 +789,12 @@ static int __init kyrofb_init(void)
 {
 #ifndef MODULE
 	char *option = NULL;
+#endif
+
+	if (fb_modesetting_disabled("kyrofb"))
+		return -ENODEV;
 
+#ifndef MODULE
 	if (fb_get_options("kyrofb", &option))
 		return -ENODEV;
 	kyrofb_setup(option);

drivers/video/fbdev/matrox/matroxfb_base.c

@@ -2314,6 +2314,9 @@ static void __init matroxfb_init_params(void) {
 static int __init matrox_init(void) {
 	int err;
 
+	if (fb_modesetting_disabled("matroxfb"))
+		return -ENODEV;
+
 	matroxfb_init_params();
 	err = pci_register_driver(&matroxfb_driver);
 	dev = -1;	/* accept all new devices... */

drivers/video/fbdev/mb862xx/mb862xxfbdrv.c

@@ -1181,6 +1181,9 @@ static int mb862xxfb_init(void)
 {
 	int ret = -ENODEV;
 
+	if (fb_modesetting_disabled(DRV_NAME))
+		return -ENODEV;
+
 #if defined(CONFIG_FB_MB862XX_LIME)
 	ret = platform_driver_register(&of_platform_mb862xxfb_driver);
 #endif

drivers/video/fbdev/neofb.c

@@ -2209,7 +2209,12 @@ static int __init neofb_init(void)
 {
 #ifndef MODULE
 	char *option = NULL;
+#endif
+
+	if (fb_modesetting_disabled("neofb"))
+		return -ENODEV;
 
+#ifndef MODULE
 	if (fb_get_options("neofb", &option))
 		return -ENODEV;
 	neofb_setup(option);

drivers/video/fbdev/nvidia/nvidia.c

@@ -1521,7 +1521,12 @@ static int nvidiafb_init(void)
 {
 #ifndef MODULE
 	char *option = NULL;
+#endif
+
+	if (fb_modesetting_disabled("nvidiafb"))
+		return -ENODEV;
 
+#ifndef MODULE
 	if (fb_get_options("nvidiafb", &option))
 		return -ENODEV;
 	nvidiafb_setup(option);

drivers/video/fbdev/pm2fb.c

@@ -1799,7 +1799,12 @@ static int __init pm2fb_init(void)
 {
 #ifndef MODULE
 	char *option = NULL;
+#endif
+
+	if (fb_modesetting_disabled("pm2fb"))
+		return -ENODEV;
 
+#ifndef MODULE
 	if (fb_get_options("pm2fb", &option))
 		return -ENODEV;
 	pm2fb_setup(option);

drivers/video/fbdev/pm3fb.c

@@ -1540,7 +1540,12 @@ static int __init pm3fb_init(void)
 	 */
 #ifndef MODULE
 	char *option = NULL;
+#endif
+
+	if (fb_modesetting_disabled("pm3fb"))
+		return -ENODEV;
 
+#ifndef MODULE
 	if (fb_get_options("pm3fb", &option))
 		return -ENODEV;
 	pm3fb_setup(option);

drivers/video/fbdev/pvr2fb.c

@@ -1082,7 +1082,12 @@ static int __init pvr2fb_init(void)
 
 #ifndef MODULE
 	char *option = NULL;
+#endif
+
+	if (fb_modesetting_disabled("pvr2fb"))
+		return -ENODEV;
 
+#ifndef MODULE
 	if (fb_get_options("pvr2fb", &option))
 		return -ENODEV;
 	pvr2fb_setup(option);

drivers/video/fbdev/riva/fbdev.c

@@ -2165,7 +2165,12 @@ static int rivafb_init(void)
 {
 #ifndef MODULE
 	char *option = NULL;
+#endif
+
+	if (fb_modesetting_disabled("rivafb"))
+		return -ENODEV;
 
+#ifndef MODULE
 	if (fb_get_options("rivafb", &option))
 		return -ENODEV;
 	rivafb_setup(option);

drivers/video/fbdev/s3fb.c

@@ -1558,7 +1558,12 @@ static int __init s3fb_init(void)
 
 #ifndef MODULE
 	char *option = NULL;
+#endif
+
+	if (fb_modesetting_disabled("s3fb"))
+		return -ENODEV;
 
+#ifndef MODULE
 	if (fb_get_options("s3fb", &option))
 		return -ENODEV;
 	s3fb_setup(option);

drivers/video/fbdev/savage/savagefb_driver.c

@@ -2556,6 +2556,9 @@ static int __init savagefb_init(void)
 
 	DBG("savagefb_init");
 
+	if (fb_modesetting_disabled("savagefb"))
+		return -ENODEV;
+
 	if (fb_get_options("savagefb", &option))
 		return -ENODEV;
 

drivers/video/fbdev/sis/sis_main.c

@@ -6588,7 +6588,12 @@ static int __init sisfb_init(void)
 {
 #ifndef MODULE
 	char *options = NULL;
+#endif
+
+	if (fb_modesetting_disabled("sisfb"))
+		return -ENODEV;
 
+#ifndef MODULE
 	if(fb_get_options("sisfb", &options))
 		return -ENODEV;
 

drivers/video/fbdev/skeletonfb.c

@@ -987,7 +987,12 @@ static int __init xxxfb_init(void)
 	 */
 #ifndef MODULE
 	char *option = NULL;
+#endif
+
+	if (fb_modesetting_disabled("xxxfb"))
+		return -ENODEV;
 
+#ifndef MODULE
 	if (fb_get_options("xxxfb", &option))
 		return -ENODEV;
 	xxxfb_setup(option);

drivers/video/fbdev/sm712fb.c

@@ -1756,6 +1756,9 @@ static int __init sm712fb_init(void)
 {
 	char *option = NULL;
 
+	if (fb_modesetting_disabled("sm712fb"))
+		return -ENODEV;
+
 	if (fb_get_options("sm712fb", &option))
 		return -ENODEV;
 	if (option && *option)

drivers/video/fbdev/sstfb.c

@@ -1503,6 +1503,9 @@ static int sstfb_init(void)
 {
 	char *option = NULL;
 
+	if (fb_modesetting_disabled("sstfb"))
+		return -ENODEV;
+
 	if (fb_get_options("sstfb", &option))
 		return -ENODEV;
 	sstfb_setup(option);

drivers/video/fbdev/sunxvr2500.c

@@ -247,6 +247,9 @@ static struct pci_driver s3d_driver = {
 
 static int __init s3d_init(void)
 {
+	if (fb_modesetting_disabled("s3d"))
+		return -ENODEV;
+
 	if (fb_get_options("s3d", NULL))
 		return -ENODEV;
 

drivers/video/fbdev/sunxvr500.c

@@ -430,6 +430,9 @@ static struct pci_driver e3d_driver = {
 
 static int __init e3d_init(void)
 {
+	if (fb_modesetting_disabled("e3d"))
+		return -ENODEV;
+
 	if (fb_get_options("e3d", NULL))
 		return -ENODEV;
 

drivers/video/fbdev/tdfxfb.c

@@ -1632,7 +1632,12 @@ static int __init tdfxfb_init(void)
 {
 #ifndef MODULE
 	char *option = NULL;
+#endif
+
+	if (fb_modesetting_disabled("tdfxfb"))
+		return -ENODEV;
 
+#ifndef MODULE
 	if (fb_get_options("tdfxfb", &option))
 		return -ENODEV;
 

drivers/video/fbdev/tgafb.c

@@ -1597,7 +1597,12 @@ static int tgafb_init(void)
 	int status;
 #ifndef MODULE
 	char *option = NULL;
+#endif
+
+	if (fb_modesetting_disabled("tgafb"))
+		return -ENODEV;
 
+#ifndef MODULE
 	if (fb_get_options("tgafb", &option))
 		return -ENODEV;
 	tgafb_setup(option);

drivers/video/fbdev/tridentfb.c

@@ -1811,7 +1811,12 @@ static int __init tridentfb_init(void)
 {
 #ifndef MODULE
 	char *option = NULL;
+#endif
+
+	if (fb_modesetting_disabled("tridentfb"))
+		return -ENODEV;
 
+#ifndef MODULE
 	if (fb_get_options("tridentfb", &option))
 		return -ENODEV;
 	tridentfb_setup(option);

drivers/video/fbdev/vermilion/vermilion.c

@@ -1057,7 +1057,12 @@ static int __init vmlfb_init(void)
 
 #ifndef MODULE
 	char *option = NULL;
+#endif
+
+	if (fb_modesetting_disabled("vmlfb"))
+		return -ENODEV;
 
+#ifndef MODULE
 	if (fb_get_options(MODULE_NAME, &option))
 		return -ENODEV;
 #endif

drivers/video/fbdev/via/via-core.c

@@ -725,6 +725,9 @@ static int __init via_core_init(void)
 {
 	int ret;
 
+	if (fb_modesetting_disabled("viafb"))
+		return -ENODEV;
+
 	ret = viafb_init();
 	if (ret)
 		return ret;

drivers/video/fbdev/vt8623fb.c

@@ -920,7 +920,12 @@ static int __init vt8623fb_init(void)
 
 #ifndef MODULE
 	char *option = NULL;
+#endif
+
+	if (fb_modesetting_disabled("vt8623fb"))
+		return -ENODEV;
 
+#ifndef MODULE
 	if (fb_get_options("vt8623fb", &option))
 		return -ENODEV;
 

include/linux/fb.h

@@ -804,6 +804,15 @@ extern int fb_find_mode(struct fb_var_screeninfo *var,
 			const struct fb_videomode *default_mode,
 			unsigned int default_bpp);
 
+#if defined(CONFIG_VIDEO_NOMODESET)
+bool fb_modesetting_disabled(const char *drvname);
+#else
+bool fb_modesetting_disabled(const char *drvname)
+{
+	return false;
+}
+#endif
+
 /* Convenience logging macros */
 #define fb_err(fb_info, fmt, ...)					\
 	pr_err("fb%d: " fmt, (fb_info)->node, ##__VA_ARGS__)