Commit 0bb16830 authored by Alex Williams's avatar Alex Williams Committed by David S. Miller

net: nixge: Update device-tree bindings with v3.00

Now the DMA engine is free to float elsewhere in the system map.
Signed-off-by: default avatarAlex Williams <alex.williams@ni.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 87ab2079
* NI XGE Ethernet controller * NI XGE Ethernet controller
Required properties: Required properties:
- compatible: Should be "ni,xge-enet-2.00" - compatible: Should be "ni,xge-enet-3.00", but can be "ni,xge-enet-2.00" for
- reg: Address and length of the register set for the device older device trees with DMA engines co-located in the address map,
with the one reg entry to describe the whole device.
- reg: Address and length of the register set for the device. It contains the
information of registers in the same order as described by reg-names.
- reg-names: Should contain the reg names
"dma": DMA engine control and status region
"ctrl": MDIO and PHY control and status region
- interrupts: Should contain tx and rx interrupt - interrupts: Should contain tx and rx interrupt
- interrupt-names: Should be "rx" and "tx" - interrupt-names: Should be "rx" and "tx"
- phy-mode: See ethernet.txt file in the same directory. - phy-mode: See ethernet.txt file in the same directory.
...@@ -12,8 +18,10 @@ Required properties: ...@@ -12,8 +18,10 @@ Required properties:
Examples (10G generic PHY): Examples (10G generic PHY):
nixge0: ethernet@40000000 { nixge0: ethernet@40000000 {
compatible = "ni,xge-enet-2.00"; compatible = "ni,xge-enet-3.00";
reg = <0x40000000 0x6000>; reg = <0x40000000 0x4000
0x41002000 0x2000>;
reg-names = "dma", "ctrl";
nvmem-cells = <&eth1_addr>; nvmem-cells = <&eth1_addr>;
nvmem-cell-names = "address"; nvmem-cell-names = "address";
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment