Commit 0bcf2e4a authored by Vladimir Oltean's avatar Vladimir Oltean Committed by David S. Miller

net: dsa: tag_ocelot: call only the relevant portion of __skb_vlan_pop() on TX

ocelot_xmit_get_vlan_info() calls __skb_vlan_pop() as the most
appropriate helper I could find which strips away a VLAN header.
That's all I need it to do, but __skb_vlan_pop() has more logic, which
will become incompatible with the future revert of commit 6d1ccff6
("net: reset mac header in dev_start_xmit()").

Namely, it performs a sanity check on skb_mac_header(), which will stop
being set after the above revert, so it will return an error instead of
removing the VLAN tag.

ocelot_xmit_get_vlan_info() gets called in 2 circumstances:

(1) the port is under a VLAN-aware bridge and the bridge sends
    VLAN-tagged packets

(2) the port is under a VLAN-aware bridge and somebody else (an 8021q
    upper) sends VLAN-tagged packets (using a VID that isn't in the
    bridge vlan tables)

In case (1), there is actually no bug to defend against, because
br_dev_xmit() calls skb_reset_mac_header() and things continue to work.

However, in case (2), illustrated using the commands below, it can be
seen that our intervention is needed, since __skb_vlan_pop() complains:

$ ip link add br0 type bridge vlan_filtering 1 && ip link set br0 up
$ ip link set $eth master br0 && ip link set $eth up
$ ip link add link $eth name $eth.100 type vlan id 100 && ip link set $eth.100 up
$ ip addr add 192.168.100.1/24 dev $eth.100

I could fend off the checks in __skb_vlan_pop() with some
skb_mac_header_was_set() calls, but seeing how few callers of
__skb_vlan_pop() there are from TX paths, that seems rather
unproductive.

As an alternative solution, extract the bare minimum logic to strip a
VLAN header, and move it to a new helper named vlan_remove_tag(), close
to the definition of vlan_insert_tag(). Document it appropriately and
make ocelot_xmit_get_vlan_info() call this smaller helper instead.

Seeing that it doesn't appear illegal to test skb->protocol in the TX
path, I guess it would be a good for vlan_remove_tag() to also absorb
the vlan_set_encap_proto() function call.
Signed-off-by: default avatarVladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: default avatarSimon Horman <simon.horman@corigine.com>
Reviewed-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Reviewed-by: default avatarEric Dumazet <edumazet@google.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent f0a9d563
......@@ -685,6 +685,27 @@ static inline void vlan_set_encap_proto(struct sk_buff *skb,
skb->protocol = htons(ETH_P_802_2);
}
/**
* vlan_remove_tag - remove outer VLAN tag from payload
* @skb: skbuff to remove tag from
* @vlan_tci: buffer to store value
*
* Expects the skb to contain a VLAN tag in the payload, and to have skb->data
* pointing at the MAC header.
*
* Returns a new pointer to skb->data, or NULL on failure to pull.
*/
static inline void *vlan_remove_tag(struct sk_buff *skb, u16 *vlan_tci)
{
struct vlan_hdr *vhdr = (struct vlan_hdr *)(skb->data + ETH_HLEN);
*vlan_tci = ntohs(vhdr->h_vlan_TCI);
memmove(skb->data + VLAN_HLEN, skb->data, 2 * ETH_ALEN);
vlan_set_encap_proto(skb, vhdr);
return __skb_pull(skb, VLAN_HLEN);
}
/**
* skb_vlan_tagged - check if skb is vlan tagged.
* @skb: skbuff to query
......
......@@ -5996,7 +5996,6 @@ EXPORT_SYMBOL(skb_ensure_writable);
*/
int __skb_vlan_pop(struct sk_buff *skb, u16 *vlan_tci)
{
struct vlan_hdr *vhdr;
int offset = skb->data - skb_mac_header(skb);
int err;
......@@ -6012,13 +6011,8 @@ int __skb_vlan_pop(struct sk_buff *skb, u16 *vlan_tci)
skb_postpull_rcsum(skb, skb->data + (2 * ETH_ALEN), VLAN_HLEN);
vhdr = (struct vlan_hdr *)(skb->data + ETH_HLEN);
*vlan_tci = ntohs(vhdr->h_vlan_TCI);
memmove(skb->data + VLAN_HLEN, skb->data, 2 * ETH_ALEN);
__skb_pull(skb, VLAN_HLEN);
vlan_remove_tag(skb, vlan_tci);
vlan_set_encap_proto(skb, vhdr);
skb->mac_header += VLAN_HLEN;
if (skb_network_offset(skb) < ETH_HLEN)
......
......@@ -30,7 +30,7 @@ static void ocelot_xmit_get_vlan_info(struct sk_buff *skb, struct dsa_port *dp,
br_vlan_get_proto(br, &proto);
if (ntohs(hdr->h_vlan_proto) == proto) {
__skb_vlan_pop(skb, &tci);
vlan_remove_tag(skb, &tci);
*vlan_tci = tci;
} else {
rcu_read_lock();
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment