Merge tag 'md-next-20231219' of...

Merge tag 'md-next-20231219' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md into for-6.8/block

Pull MD updates from Song:

"1. Remove deprecated flavors, by Song Liu;
 2. raid1 read error check support, by Li Nan;
 3. Better handle events off-by-1 case, by Alex Lyakas."

* tag 'md-next-20231219' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md:
  md: Remove deprecated CONFIG_MD_FAULTY
  md: Remove deprecated CONFIG_MD_MULTIPATH
  md: Remove deprecated CONFIG_MD_LINEAR
  md/raid1: support read error check
  md: factor out a helper exceed_read_errors() to check read_errors
  md: Whenassemble the array, consult the superblock of the freshest device
  md/raid1: remove unnecessary null checking

drivers/md/Kconfig

@@ -61,19 +61,6 @@ config MD_BITMAP_FILE
 	  various kernel APIs and can only work with files on a file system not
 	  actually sitting on the MD device.
 
-config MD_LINEAR
-	tristate "Linear (append) mode (deprecated)"
-	depends on BLK_DEV_MD
-	help
-	  If you say Y here, then your multiple devices driver will be able to
-	  use the so-called linear mode, i.e. it will combine the hard disk
-	  partitions by simply appending one to the other.
-
-	  To compile this as a module, choose M here: the module
-	  will be called linear.
-
-	  If unsure, say Y.
-
 config MD_RAID0
 	tristate "RAID-0 (striping) mode"
 	depends on BLK_DEV_MD
@@ -172,27 +159,6 @@ config MD_RAID456
 
 	  If unsure, say Y.
 
-config MD_MULTIPATH
-	tristate "Multipath I/O support (deprecated)"
-	depends on BLK_DEV_MD
-	help
-	  MD_MULTIPATH provides a simple multi-path personality for use
-	  the MD framework.  It is not under active development.  New
-	  projects should consider using DM_MULTIPATH which has more
-	  features and more testing.
-
-	  If unsure, say N.
-
-config MD_FAULTY
-	tristate "Faulty test module for MD (deprecated)"
-	depends on BLK_DEV_MD
-	help
-	  The "faulty" module allows for a block device that occasionally returns
-	  read or write errors.  It is useful for testing.
-
-	  In unsure, say N.
-
-
 config MD_CLUSTER
 	tristate "Cluster Support for MD"
 	depends on BLK_DEV_MD

drivers/md/Makefile

@@ -29,22 +29,16 @@ dm-zoned-y	+= dm-zoned-target.o dm-zoned-metadata.o dm-zoned-reclaim.o
 
 md-mod-y	+= md.o md-bitmap.o
 raid456-y	+= raid5.o raid5-cache.o raid5-ppl.o
-linear-y	+= md-linear.o
-multipath-y	+= md-multipath.o
-faulty-y	+= md-faulty.o
 
 # Note: link order is important.  All raid personalities
-# and must come before md.o, as they each initialise 
-# themselves, and md.o may use the personalities when it 
+# and must come before md.o, as they each initialise
+# themselves, and md.o may use the personalities when it
 # auto-initialised.
 
-obj-$(CONFIG_MD_LINEAR)		+= linear.o
 obj-$(CONFIG_MD_RAID0)		+= raid0.o
 obj-$(CONFIG_MD_RAID1)		+= raid1.o
 obj-$(CONFIG_MD_RAID10)		+= raid10.o
 obj-$(CONFIG_MD_RAID456)	+= raid456.o
-obj-$(CONFIG_MD_MULTIPATH)	+= multipath.o
-obj-$(CONFIG_MD_FAULTY)		+= faulty.o
 obj-$(CONFIG_MD_CLUSTER)	+= md-cluster.o
 obj-$(CONFIG_BCACHE)		+= bcache/
 obj-$(CONFIG_BLK_DEV_MD)	+= md-mod.o

drivers/md/md-autodetect.c

@@ -49,7 +49,6 @@ static int md_setup_ents __initdata;
  *             instead of just one.  -- KTK
  * 18May2000: Added support for persistent-superblock arrays:
  *             md=n,0,factor,fault,device-list   uses RAID0 for device n
- *             md=n,-1,factor,fault,device-list  uses LINEAR for device n
  *             md=n,device-list      reads a RAID superblock from the devices
  *             elements in device-list are read by name_to_kdev_t so can be
  *             a hex number or something like /dev/hda1 /dev/sdb
@@ -88,7 +87,7 @@ static int __init md_setup(char *str)
 		md_setup_ents++;
 	switch (get_option(&str, &level)) {	/* RAID level */
 	case 2: /* could be 0 or -1.. */
-		if (level == 0 || level == LEVEL_LINEAR) {
+		if (level == 0) {
 			if (get_option(&str, &factor) != 2 ||	/* Chunk Size */
 					get_option(&str, &fault) != 2) {
 				printk(KERN_WARNING "md: Too few arguments supplied to md=.\n");
@@ -96,10 +95,7 @@ static int __init md_setup(char *str)
 			}
 			md_setup_args[ent].level = level;
 			md_setup_args[ent].chunk = 1 << (factor+12);
-			if (level ==  LEVEL_LINEAR)
-				pername = "linear";
-			else
-				pername = "raid0";
+			pername = "raid0";
 			break;
 		}
 		fallthrough;

drivers/md/md-faulty.c

-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * faulty.c : Multiple Devices driver for Linux
- *
- * Copyright (C) 2004 Neil Brown
- *
- * fautly-device-simulator personality for md
- */
-
-
-/*
- * The "faulty" personality causes some requests to fail.
- *
- * Possible failure modes are:
- *   reads fail "randomly" but succeed on retry
- *   writes fail "randomly" but succeed on retry
- *   reads for some address fail and then persist until a write
- *   reads for some address fail and then persist irrespective of write
- *   writes for some address fail and persist
- *   all writes fail
- *
- * Different modes can be active at a time, but only
- * one can be set at array creation.  Others can be added later.
- * A mode can be one-shot or recurrent with the recurrence being
- * once in every N requests.
- * The bottom 5 bits of the "layout" indicate the mode.  The
- * remainder indicate a period, or 0 for one-shot.
- *
- * There is an implementation limit on the number of concurrently
- * persisting-faulty blocks. When a new fault is requested that would
- * exceed the limit, it is ignored.
- * All current faults can be clear using a layout of "0".
- *
- * Requests are always sent to the device.  If they are to fail,
- * we clone the bio and insert a new b_end_io into the chain.
- */
-
-#define	WriteTransient	0
-#define	ReadTransient	1
-#define	WritePersistent	2
-#define	ReadPersistent	3
-#define	WriteAll	4 /* doesn't go to device */
-#define	ReadFixable	5
-#define	Modes	6
-
-#define	ClearErrors	31
-#define	ClearFaults	30
-
-#define AllPersist	100 /* internal use only */
-#define	NoPersist	101
-
-#define	ModeMask	0x1f
-#define	ModeShift	5
-
-#define MaxFault	50
-#include <linux/blkdev.h>
-#include <linux/module.h>
-#include <linux/raid/md_u.h>
-#include <linux/slab.h>
-#include "md.h"
-#include <linux/seq_file.h>
-
-
-static void faulty_fail(struct bio *bio)
-{
-	struct bio *b = bio->bi_private;
-
-	b->bi_iter.bi_size = bio->bi_iter.bi_size;
-	b->bi_iter.bi_sector = bio->bi_iter.bi_sector;
-
-	bio_put(bio);
-
-	bio_io_error(b);
-}
-
-struct faulty_conf {
-	int period[Modes];
-	atomic_t counters[Modes];
-	sector_t faults[MaxFault];
-	int	modes[MaxFault];
-	int nfaults;
-	struct md_rdev *rdev;
-};
-
-static int check_mode(struct faulty_conf *conf, int mode)
-{
-	if (conf->period[mode] == 0 &&
-	    atomic_read(&conf->counters[mode]) <= 0)
-		return 0; /* no failure, no decrement */
-
-
-	if (atomic_dec_and_test(&conf->counters[mode])) {
-		if (conf->period[mode])
-			atomic_set(&conf->counters[mode], conf->period[mode]);
-		return 1;
-	}
-	return 0;
-}
-
-static int check_sector(struct faulty_conf *conf, sector_t start, sector_t end, int dir)
-{
-	/* If we find a ReadFixable sector, we fix it ... */
-	int i;
-	for (i=0; i<conf->nfaults; i++)
-		if (conf->faults[i] >= start &&
-		    conf->faults[i] < end) {
-			/* found it ... */
-			switch (conf->modes[i] * 2 + dir) {
-			case WritePersistent*2+WRITE: return 1;
-			case ReadPersistent*2+READ: return 1;
-			case ReadFixable*2+READ: return 1;
-			case ReadFixable*2+WRITE:
-				conf->modes[i] = NoPersist;
-				return 0;
-			case AllPersist*2+READ:
-			case AllPersist*2+WRITE: return 1;
-			default:
-				return 0;
-			}
-		}
-	return 0;
-}
-
-static void add_sector(struct faulty_conf *conf, sector_t start, int mode)
-{
-	int i;
-	int n = conf->nfaults;
-	for (i=0; i<conf->nfaults; i++)
-		if (conf->faults[i] == start) {
-			switch(mode) {
-			case NoPersist: conf->modes[i] = mode; return;
-			case WritePersistent:
-				if (conf->modes[i] == ReadPersistent ||
-				    conf->modes[i] == ReadFixable)
-					conf->modes[i] = AllPersist;
-				else
-					conf->modes[i] = WritePersistent;
-				return;
-			case ReadPersistent:
-				if (conf->modes[i] == WritePersistent)
-					conf->modes[i] = AllPersist;
-				else
-					conf->modes[i] = ReadPersistent;
-				return;
-			case ReadFixable:
-				if (conf->modes[i] == WritePersistent ||
-				    conf->modes[i] == ReadPersistent)
-					conf->modes[i] = AllPersist;
-				else
-					conf->modes[i] = ReadFixable;
-				return;
-			}
-		} else if (conf->modes[i] == NoPersist)
-			n = i;
-
-	if (n >= MaxFault)
-		return;
-	conf->faults[n] = start;
-	conf->modes[n] = mode;
-	if (conf->nfaults == n)
-		conf->nfaults = n+1;
-}
-
-static bool faulty_make_request(struct mddev *mddev, struct bio *bio)
-{
-	struct faulty_conf *conf = mddev->private;
-	int failit = 0;
-
-	if (bio_data_dir(bio) == WRITE) {
-		/* write request */
-		if (atomic_read(&conf->counters[WriteAll])) {
-			/* special case - don't decrement, don't submit_bio_noacct,
-			 * just fail immediately
-			 */
-			bio_io_error(bio);
-			return true;
-		}
-
-		if (check_sector(conf, bio->bi_iter.bi_sector,
-				 bio_end_sector(bio), WRITE))
-			failit = 1;
-		if (check_mode(conf, WritePersistent)) {
-			add_sector(conf, bio->bi_iter.bi_sector,
-				   WritePersistent);
-			failit = 1;
-		}
-		if (check_mode(conf, WriteTransient))
-			failit = 1;
-	} else {
-		/* read request */
-		if (check_sector(conf, bio->bi_iter.bi_sector,
-				 bio_end_sector(bio), READ))
-			failit = 1;
-		if (check_mode(conf, ReadTransient))
-			failit = 1;
-		if (check_mode(conf, ReadPersistent)) {
-			add_sector(conf, bio->bi_iter.bi_sector,
-				   ReadPersistent);
-			failit = 1;
-		}
-		if (check_mode(conf, ReadFixable)) {
-			add_sector(conf, bio->bi_iter.bi_sector,
-				   ReadFixable);
-			failit = 1;
-		}
-	}
-
-	md_account_bio(mddev, &bio);
-	if (failit) {
-		struct bio *b = bio_alloc_clone(conf->rdev->bdev, bio, GFP_NOIO,
-						&mddev->bio_set);
-
-		b->bi_private = bio;
-		b->bi_end_io = faulty_fail;
-		bio = b;
-	} else
-		bio_set_dev(bio, conf->rdev->bdev);
-
-	submit_bio_noacct(bio);
-	return true;
-}
-
-static void faulty_status(struct seq_file *seq, struct mddev *mddev)
-{
-	struct faulty_conf *conf = mddev->private;
-	int n;
-
-	if ((n=atomic_read(&conf->counters[WriteTransient])) != 0)
-		seq_printf(seq, " WriteTransient=%d(%d)",
-			   n, conf->period[WriteTransient]);
-
-	if ((n=atomic_read(&conf->counters[ReadTransient])) != 0)
-		seq_printf(seq, " ReadTransient=%d(%d)",
-			   n, conf->period[ReadTransient]);
-
-	if ((n=atomic_read(&conf->counters[WritePersistent])) != 0)
-		seq_printf(seq, " WritePersistent=%d(%d)",
-			   n, conf->period[WritePersistent]);
-
-	if ((n=atomic_read(&conf->counters[ReadPersistent])) != 0)
-		seq_printf(seq, " ReadPersistent=%d(%d)",
-			   n, conf->period[ReadPersistent]);
-
-
-	if ((n=atomic_read(&conf->counters[ReadFixable])) != 0)
-		seq_printf(seq, " ReadFixable=%d(%d)",
-			   n, conf->period[ReadFixable]);
-
-	if ((n=atomic_read(&conf->counters[WriteAll])) != 0)
-		seq_printf(seq, " WriteAll");
-
-	seq_printf(seq, " nfaults=%d", conf->nfaults);
-}
-
-
-static int faulty_reshape(struct mddev *mddev)
-{
-	int mode = mddev->new_layout & ModeMask;
-	int count = mddev->new_layout >> ModeShift;
-	struct faulty_conf *conf = mddev->private;
-
-	if (mddev->new_layout < 0)
-		return 0;
-
-	/* new layout */
-	if (mode == ClearFaults)
-		conf->nfaults = 0;
-	else if (mode == ClearErrors) {
-		int i;
-		for (i=0 ; i < Modes ; i++) {
-			conf->period[i] = 0;
-			atomic_set(&conf->counters[i], 0);
-		}
-	} else if (mode < Modes) {
-		conf->period[mode] = count;
-		if (!count) count++;
-		atomic_set(&conf->counters[mode], count);
-	} else
-		return -EINVAL;
-	mddev->new_layout = -1;
-	mddev->layout = -1; /* makes sure further changes come through */
-	return 0;
-}
-
-static sector_t faulty_size(struct mddev *mddev, sector_t sectors, int raid_disks)
-{
-	WARN_ONCE(raid_disks,
-		  "%s does not support generic reshape\n", __func__);
-
-	if (sectors == 0)
-		return mddev->dev_sectors;
-
-	return sectors;
-}
-
-static int faulty_run(struct mddev *mddev)
-{
-	struct md_rdev *rdev;
-	int i;
-	struct faulty_conf *conf;
-
-	if (md_check_no_bitmap(mddev))
-		return -EINVAL;
-
-	conf = kmalloc(sizeof(*conf), GFP_KERNEL);
-	if (!conf)
-		return -ENOMEM;
-
-	for (i=0; i<Modes; i++) {
-		atomic_set(&conf->counters[i], 0);
-		conf->period[i] = 0;
-	}
-	conf->nfaults = 0;
-
-	rdev_for_each(rdev, mddev) {
-		conf->rdev = rdev;
-		disk_stack_limits(mddev->gendisk, rdev->bdev,
-				  rdev->data_offset << 9);
-	}
-
-	md_set_array_sectors(mddev, faulty_size(mddev, 0, 0));
-	mddev->private = conf;
-
-	faulty_reshape(mddev);
-
-	return 0;
-}
-
-static void faulty_free(struct mddev *mddev, void *priv)
-{
-	struct faulty_conf *conf = priv;
-
-	kfree(conf);
-}
-
-static struct md_personality faulty_personality =
-{
-	.name		= "faulty",
-	.level		= LEVEL_FAULTY,
-	.owner		= THIS_MODULE,
-	.make_request	= faulty_make_request,
-	.run		= faulty_run,
-	.free		= faulty_free,
-	.status		= faulty_status,
-	.check_reshape	= faulty_reshape,
-	.size		= faulty_size,
-};
-
-static int __init raid_init(void)
-{
-	return register_md_personality(&faulty_personality);
-}
-
-static void raid_exit(void)
-{
-	unregister_md_personality(&faulty_personality);
-}
-
-module_init(raid_init);
-module_exit(raid_exit);
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("Fault injection personality for MD (deprecated)");
-MODULE_ALIAS("md-personality-10"); /* faulty */
-MODULE_ALIAS("md-faulty");
-MODULE_ALIAS("md-level--5");

drivers/md/md-linear.c

-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
-   linear.c : Multiple Devices driver for Linux
-	      Copyright (C) 1994-96 Marc ZYNGIER
-	      <zyngier@ufr-info-p7.ibp.fr> or
-	      <maz@gloups.fdn.fr>
-
-   Linear mode management functions.
-
-*/
-
-#include <linux/blkdev.h>
-#include <linux/raid/md_u.h>
-#include <linux/seq_file.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <trace/events/block.h>
-#include "md.h"
-#include "md-linear.h"
-
-/*
- * find which device holds a particular offset
- */
-static inline struct dev_info *which_dev(struct mddev *mddev, sector_t sector)
-{
-	int lo, mid, hi;
-	struct linear_conf *conf;
-
-	lo = 0;
-	hi = mddev->raid_disks - 1;
-	conf = mddev->private;
-
-	/*
-	 * Binary Search
-	 */
-
-	while (hi > lo) {
-
-		mid = (hi + lo) / 2;
-		if (sector < conf->disks[mid].end_sector)
-			hi = mid;
-		else
-			lo = mid + 1;
-	}
-
-	return conf->disks + lo;
-}
-
-static sector_t linear_size(struct mddev *mddev, sector_t sectors, int raid_disks)
-{
-	struct linear_conf *conf;
-	sector_t array_sectors;
-
-	conf = mddev->private;
-	WARN_ONCE(sectors || raid_disks,
-		  "%s does not support generic reshape\n", __func__);
-	array_sectors = conf->array_sectors;
-
-	return array_sectors;
-}
-
-static struct linear_conf *linear_conf(struct mddev *mddev, int raid_disks)
-{
-	struct linear_conf *conf;
-	struct md_rdev *rdev;
-	int i, cnt;
-
-	conf = kzalloc(struct_size(conf, disks, raid_disks), GFP_KERNEL);
-	if (!conf)
-		return NULL;
-
-	/*
-	 * conf->raid_disks is copy of mddev->raid_disks. The reason to
-	 * keep a copy of mddev->raid_disks in struct linear_conf is,
-	 * mddev->raid_disks may not be consistent with pointers number of
-	 * conf->disks[] when it is updated in linear_add() and used to
-	 * iterate old conf->disks[] earray in linear_congested().
-	 * Here conf->raid_disks is always consitent with number of
-	 * pointers in conf->disks[] array, and mddev->private is updated
-	 * with rcu_assign_pointer() in linear_addr(), such race can be
-	 * avoided.
-	 */
-	conf->raid_disks = raid_disks;
-
-	cnt = 0;
-	conf->array_sectors = 0;
-
-	rdev_for_each(rdev, mddev) {
-		int j = rdev->raid_disk;
-		struct dev_info *disk = conf->disks + j;
-		sector_t sectors;
-
-		if (j < 0 || j >= raid_disks || disk->rdev) {
-			pr_warn("md/linear:%s: disk numbering problem. Aborting!\n",
-				mdname(mddev));
-			goto out;
-		}
-
-		disk->rdev = rdev;
-		if (mddev->chunk_sectors) {
-			sectors = rdev->sectors;
-			sector_div(sectors, mddev->chunk_sectors);
-			rdev->sectors = sectors * mddev->chunk_sectors;
-		}
-
-		disk_stack_limits(mddev->gendisk, rdev->bdev,
-				  rdev->data_offset << 9);
-
-		conf->array_sectors += rdev->sectors;
-		cnt++;
-	}
-	if (cnt != raid_disks) {
-		pr_warn("md/linear:%s: not enough drives present. Aborting!\n",
-			mdname(mddev));
-		goto out;
-	}
-
-	/*
-	 * Here we calculate the device offsets.
-	 */
-	conf->disks[0].end_sector = conf->disks[0].rdev->sectors;
-
-	for (i = 1; i < raid_disks; i++)
-		conf->disks[i].end_sector =
-			conf->disks[i-1].end_sector +
-			conf->disks[i].rdev->sectors;
-
-	return conf;
-
-out:
-	kfree(conf);
-	return NULL;
-}
-
-static int linear_run (struct mddev *mddev)
-{
-	struct linear_conf *conf;
-	int ret;
-
-	if (md_check_no_bitmap(mddev))
-		return -EINVAL;
-	conf = linear_conf(mddev, mddev->raid_disks);
-
-	if (!conf)
-		return 1;
-	mddev->private = conf;
-	md_set_array_sectors(mddev, linear_size(mddev, 0, 0));
-
-	ret =  md_integrity_register(mddev);
-	if (ret) {
-		kfree(conf);
-		mddev->private = NULL;
-	}
-	return ret;
-}
-
-static int linear_add(struct mddev *mddev, struct md_rdev *rdev)
-{
-	/* Adding a drive to a linear array allows the array to grow.
-	 * It is permitted if the new drive has a matching superblock
-	 * already on it, with raid_disk equal to raid_disks.
-	 * It is achieved by creating a new linear_private_data structure
-	 * and swapping it in in-place of the current one.
-	 * The current one is never freed until the array is stopped.
-	 * This avoids races.
-	 */
-	struct linear_conf *newconf, *oldconf;
-
-	if (rdev->saved_raid_disk != mddev->raid_disks)
-		return -EINVAL;
-
-	rdev->raid_disk = rdev->saved_raid_disk;
-	rdev->saved_raid_disk = -1;
-
-	newconf = linear_conf(mddev,mddev->raid_disks+1);
-
-	if (!newconf)
-		return -ENOMEM;
-
-	/* newconf->raid_disks already keeps a copy of * the increased
-	 * value of mddev->raid_disks, WARN_ONCE() is just used to make
-	 * sure of this. It is possible that oldconf is still referenced
-	 * in linear_congested(), therefore kfree_rcu() is used to free
-	 * oldconf until no one uses it anymore.
-	 */
-	oldconf = rcu_dereference_protected(mddev->private,
-			lockdep_is_held(&mddev->reconfig_mutex));
-	mddev->raid_disks++;
-	WARN_ONCE(mddev->raid_disks != newconf->raid_disks,
-		"copied raid_disks doesn't match mddev->raid_disks");
-	rcu_assign_pointer(mddev->private, newconf);
-	md_set_array_sectors(mddev, linear_size(mddev, 0, 0));
-	set_capacity_and_notify(mddev->gendisk, mddev->array_sectors);
-	kfree_rcu(oldconf, rcu);
-	return 0;
-}
-
-static void linear_free(struct mddev *mddev, void *priv)
-{
-	struct linear_conf *conf = priv;
-
-	kfree(conf);
-}
-
-static bool linear_make_request(struct mddev *mddev, struct bio *bio)
-{
-	struct dev_info *tmp_dev;
-	sector_t start_sector, end_sector, data_offset;
-	sector_t bio_sector = bio->bi_iter.bi_sector;
-
-	if (unlikely(bio->bi_opf & REQ_PREFLUSH)
-	    && md_flush_request(mddev, bio))
-		return true;
-
-	tmp_dev = which_dev(mddev, bio_sector);
-	start_sector = tmp_dev->end_sector - tmp_dev->rdev->sectors;
-	end_sector = tmp_dev->end_sector;
-	data_offset = tmp_dev->rdev->data_offset;
-
-	if (unlikely(bio_sector >= end_sector ||
-		     bio_sector < start_sector))
-		goto out_of_bounds;
-
-	if (unlikely(is_rdev_broken(tmp_dev->rdev))) {
-		md_error(mddev, tmp_dev->rdev);
-		bio_io_error(bio);
-		return true;
-	}
-
-	if (unlikely(bio_end_sector(bio) > end_sector)) {
-		/* This bio crosses a device boundary, so we have to split it */
-		struct bio *split = bio_split(bio, end_sector - bio_sector,
-					      GFP_NOIO, &mddev->bio_set);
-		bio_chain(split, bio);
-		submit_bio_noacct(bio);
-		bio = split;
-	}
-
-	md_account_bio(mddev, &bio);
-	bio_set_dev(bio, tmp_dev->rdev->bdev);
-	bio->bi_iter.bi_sector = bio->bi_iter.bi_sector -
-		start_sector + data_offset;
-
-	if (unlikely((bio_op(bio) == REQ_OP_DISCARD) &&
-		     !bdev_max_discard_sectors(bio->bi_bdev))) {
-		/* Just ignore it */
-		bio_endio(bio);
-	} else {
-		if (mddev->gendisk)
-			trace_block_bio_remap(bio, disk_devt(mddev->gendisk),
-					      bio_sector);
-		mddev_check_write_zeroes(mddev, bio);
-		submit_bio_noacct(bio);
-	}
-	return true;
-
-out_of_bounds:
-	pr_err("md/linear:%s: make_request: Sector %llu out of bounds on dev %pg: %llu sectors, offset %llu\n",
-	       mdname(mddev),
-	       (unsigned long long)bio->bi_iter.bi_sector,
-	       tmp_dev->rdev->bdev,
-	       (unsigned long long)tmp_dev->rdev->sectors,
-	       (unsigned long long)start_sector);
-	bio_io_error(bio);
-	return true;
-}
-
-static void linear_status (struct seq_file *seq, struct mddev *mddev)
-{
-	seq_printf(seq, " %dk rounding", mddev->chunk_sectors / 2);
-}
-
-static void linear_error(struct mddev *mddev, struct md_rdev *rdev)
-{
-	if (!test_and_set_bit(MD_BROKEN, &mddev->flags)) {
-		char *md_name = mdname(mddev);
-
-		pr_crit("md/linear%s: Disk failure on %pg detected, failing array.\n",
-			md_name, rdev->bdev);
-	}
-}
-
-static void linear_quiesce(struct mddev *mddev, int state)
-{
-}
-
-static struct md_personality linear_personality =
-{
-	.name		= "linear",
-	.level		= LEVEL_LINEAR,
-	.owner		= THIS_MODULE,
-	.make_request	= linear_make_request,
-	.run		= linear_run,
-	.free		= linear_free,
-	.status		= linear_status,
-	.hot_add_disk	= linear_add,
-	.size		= linear_size,
-	.quiesce	= linear_quiesce,
-	.error_handler	= linear_error,
-};
-
-static int __init linear_init (void)
-{
-	return register_md_personality (&linear_personality);
-}
-
-static void linear_exit (void)
-{
-	unregister_md_personality (&linear_personality);
-}
-
-module_init(linear_init);
-module_exit(linear_exit);
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("Linear device concatenation personality for MD (deprecated)");
-MODULE_ALIAS("md-personality-1"); /* LINEAR - deprecated*/
-MODULE_ALIAS("md-linear");
-MODULE_ALIAS("md-level--1");

drivers/md/raid1-10.c

@@ -173,3 +173,57 @@ static inline void raid1_prepare_flush_writes(struct bitmap *bitmap)
 	else
 		md_bitmap_unplug(bitmap);
 }
+
+/*
+ * Used by fix_read_error() to decay the per rdev read_errors.
+ * We halve the read error count for every hour that has elapsed
+ * since the last recorded read error.
+ */
+static inline void check_decay_read_errors(struct mddev *mddev, struct md_rdev *rdev)
+{
+	long cur_time_mon;
+	unsigned long hours_since_last;
+	unsigned int read_errors = atomic_read(&rdev->read_errors);
+
+	cur_time_mon = ktime_get_seconds();
+
+	if (rdev->last_read_error == 0) {
+		/* first time we've seen a read error */
+		rdev->last_read_error = cur_time_mon;
+		return;
+	}
+
+	hours_since_last = (long)(cur_time_mon -
+			    rdev->last_read_error) / 3600;
+
+	rdev->last_read_error = cur_time_mon;
+
+	/*
+	 * if hours_since_last is > the number of bits in read_errors
+	 * just set read errors to 0. We do this to avoid
+	 * overflowing the shift of read_errors by hours_since_last.
+	 */
+	if (hours_since_last >= 8 * sizeof(read_errors))
+		atomic_set(&rdev->read_errors, 0);
+	else
+		atomic_set(&rdev->read_errors, read_errors >> hours_since_last);
+}
+
+static inline bool exceed_read_errors(struct mddev *mddev, struct md_rdev *rdev)
+{
+	int max_read_errors = atomic_read(&mddev->max_corr_read_errors);
+	int read_errors;
+
+	check_decay_read_errors(mddev, rdev);
+	read_errors =  atomic_inc_return(&rdev->read_errors);
+	if (read_errors > max_read_errors) {
+		pr_notice("md/"RAID_1_10_NAME":%s: %pg: Raid device exceeded read_error threshold [cur %d:max %d]\n",
+			  mdname(mddev), rdev->bdev, read_errors, max_read_errors);
+		pr_notice("md/"RAID_1_10_NAME":%s: %pg: Failing raid device\n",
+			  mdname(mddev), rdev->bdev);
+		md_error(mddev, rdev);
+		return true;
+	}
+
+	return false;
+}

drivers/md/raid1.c

@@ -49,6 +49,7 @@ static void lower_barrier(struct r1conf *conf, sector_t sector_nr);
 #define raid1_log(md, fmt, args...)				\
 	do { if ((md)->queue) blk_add_trace_msg((md)->queue, "raid1 " fmt, ##args); } while (0)
 
+#define RAID_1_10_NAME "raid1"
 #include "raid1-10.c"
 
 #define START(node) ((node)->start)
@@ -1124,8 +1125,6 @@ static void alloc_behind_master_bio(struct r1bio *r1_bio,
 
 	behind_bio = bio_alloc_bioset(NULL, vcnt, 0, GFP_NOIO,
 				      &r1_bio->mddev->bio_set);
-	if (!behind_bio)
-		return;
 
 	/* discard op, we don't support writezero/writesame yet */
 	if (!bio_has_data(bio)) {
@@ -2257,16 +2256,24 @@ static void sync_request_write(struct mddev *mddev, struct r1bio *r1_bio)
  *	3.	Performs writes following reads for array synchronising.
  */
 
-static void fix_read_error(struct r1conf *conf, int read_disk,
-			   sector_t sect, int sectors)
+static void fix_read_error(struct r1conf *conf, struct r1bio *r1_bio)
 {
+	sector_t sect = r1_bio->sector;
+	int sectors = r1_bio->sectors;
+	int read_disk = r1_bio->read_disk;
 	struct mddev *mddev = conf->mddev;
+	struct md_rdev *rdev = rcu_dereference(conf->mirrors[read_disk].rdev);
+
+	if (exceed_read_errors(mddev, rdev)) {
+		r1_bio->bios[r1_bio->read_disk] = IO_BLOCKED;
+		return;
+	}
+
 	while(sectors) {
 		int s = sectors;
 		int d = read_disk;
 		int success = 0;
 		int start;
-		struct md_rdev *rdev;
 
 		if (s > (PAGE_SIZE>>9))
 			s = PAGE_SIZE >> 9;
@@ -2507,8 +2514,7 @@ static void handle_read_error(struct r1conf *conf, struct r1bio *r1_bio)
 	if (mddev->ro == 0
 	    && !test_bit(FailFast, &rdev->flags)) {
 		freeze_array(conf, 1);
-		fix_read_error(conf, r1_bio->read_disk,
-			       r1_bio->sector, r1_bio->sectors);
+		fix_read_error(conf, r1_bio);
 		unfreeze_array(conf);
 	} else if (mddev->ro == 0 && test_bit(FailFast, &rdev->flags)) {
 		md_error(mddev, rdev);

drivers/md/raid10.c

@@ -19,6 +19,8 @@
 #include <linux/raid/md_p.h>
 #include <trace/events/block.h>
 #include "md.h"
+
+#define RAID_1_10_NAME "raid10"
 #include "raid10.h"
 #include "raid0.h"
 #include "md-bitmap.h"
@@ -2592,42 +2594,6 @@ static void recovery_request_write(struct mddev *mddev, struct r10bio *r10_bio)
 	}
 }
 
-/*
- * Used by fix_read_error() to decay the per rdev read_errors.
- * We halve the read error count for every hour that has elapsed
- * since the last recorded read error.
- *
- */
-static void check_decay_read_errors(struct mddev *mddev, struct md_rdev *rdev)
-{
-	long cur_time_mon;
-	unsigned long hours_since_last;
-	unsigned int read_errors = atomic_read(&rdev->read_errors);
-
-	cur_time_mon = ktime_get_seconds();
-
-	if (rdev->last_read_error == 0) {
-		/* first time we've seen a read error */
-		rdev->last_read_error = cur_time_mon;
-		return;
-	}
-
-	hours_since_last = (long)(cur_time_mon -
-			    rdev->last_read_error) / 3600;
-
-	rdev->last_read_error = cur_time_mon;
-
-	/*
-	 * if hours_since_last is > the number of bits in read_errors
-	 * just set read errors to 0. We do this to avoid
-	 * overflowing the shift of read_errors by hours_since_last.
-	 */
-	if (hours_since_last >= 8 * sizeof(read_errors))
-		atomic_set(&rdev->read_errors, 0);
-	else
-		atomic_set(&rdev->read_errors, read_errors >> hours_since_last);
-}
-
 static int r10_sync_page_io(struct md_rdev *rdev, sector_t sector,
 			    int sectors, struct page *page, enum req_op op)
 {
@@ -2665,7 +2631,6 @@ static void fix_read_error(struct r10conf *conf, struct mddev *mddev, struct r10
 	int sect = 0; /* Offset from r10_bio->sector */
 	int sectors = r10_bio->sectors, slot = r10_bio->read_slot;
 	struct md_rdev *rdev;
-	int max_read_errors = atomic_read(&mddev->max_corr_read_errors);
 	int d = r10_bio->devs[slot].devnum;
 
 	/* still own a reference to this rdev, so it cannot
@@ -2678,15 +2643,7 @@ static void fix_read_error(struct r10conf *conf, struct mddev *mddev, struct r10
 		   more fix_read_error() attempts */
 		return;
 
-	check_decay_read_errors(mddev, rdev);
-	atomic_inc(&rdev->read_errors);
-	if (atomic_read(&rdev->read_errors) > max_read_errors) {
-		pr_notice("md/raid10:%s: %pg: Raid device exceeded read_error threshold [cur %d:max %d]\n",
-			  mdname(mddev), rdev->bdev,
-			  atomic_read(&rdev->read_errors), max_read_errors);
-		pr_notice("md/raid10:%s: %pg: Failing raid device\n",
-			  mdname(mddev), rdev->bdev);
-		md_error(mddev, rdev);
+	if (exceed_read_errors(mddev, rdev)) {
 		r10_bio->devs[slot].bio = IO_BLOCKED;
 		return;
 	}

include/uapi/linux/raid/md_p.h

@@ -2,15 +2,11 @@
 /*
    md_p.h : physical layout of Linux RAID devices
           Copyright (C) 1996-98 Ingo Molnar, Gadi Oxman
-	  
+
    This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation; either version 2, or (at your option)
    any later version.
-   
-   You should have received a copy of the GNU General Public License
-   (for example /usr/src/linux/COPYING); if not, write to the Free
-   Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  
 */
 
 #ifndef _MD_P_H
@@ -237,7 +233,7 @@ struct mdp_superblock_1 {
 	char	set_name[32];	/* set and interpreted by user-space */
 
 	__le64	ctime;		/* lo 40 bits are seconds, top 24 are microseconds or 0*/
-	__le32	level;		/* -4 (multipath), -1 (linear), 0,1,4,5 */
+	__le32	level;		/* 0,1,4,5 */
 	__le32	layout;		/* only for raid5 and raid10 currently */
 	__le64	size;		/* used size of component devices, in 512byte sectors */
 

include/uapi/linux/raid/md_u.h

@@ -2,15 +2,11 @@
 /*
    md_u.h : user <=> kernel API between Linux raidtools and RAID drivers
           Copyright (C) 1998 Ingo Molnar
-	  
+
    This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation; either version 2, or (at your option)
    any later version.
-   
-   You should have received a copy of the GNU General Public License
-   (for example /usr/src/linux/COPYING); if not, write to the Free
-   Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  
 */
 
 #ifndef _UAPI_MD_U_H
@@ -107,11 +103,6 @@ typedef struct mdu_array_info_s {
 
 } mdu_array_info_t;
 
-/* non-obvious values for 'level' */
-#define	LEVEL_MULTIPATH		(-4)
-#define	LEVEL_LINEAR		(-1)
-#define	LEVEL_FAULTY		(-5)
-
 /* we need a value for 'no level specified' and 0
  * means 'raid0', so we need something else.  This is
  * for internal use only