ixgbe: Add support for toggling VLAN filtering flag via ethtool

This change makes it so that we can use the ethtool rx-vlan-filter flag to
toggle Rx VLAN filtering on and off.  This is basically just an extension
of the existing VLAN promisc work in that it just adds support for the
additional ethtool flag.
Signed-off-by: Alexander Duyck <aduyck@mirantis.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

drivers/net/ethernet/intel/ixgbe/ixgbe_main.c

@@ -4447,6 +4447,7 @@ void ixgbe_set_rx_mode(struct net_device *netdev)
 	struct ixgbe_adapter *adapter = netdev_priv(netdev);
 	struct ixgbe_hw *hw = &adapter->hw;
 	u32 fctrl, vmolr = IXGBE_VMOLR_BAM | IXGBE_VMOLR_AUPE;
+	netdev_features_t features = netdev->features;
 	int count;
 
 	/* Check for Promiscuous and All Multicast modes */
@@ -4464,14 +4465,13 @@ void ixgbe_set_rx_mode(struct net_device *netdev)
 		hw->addr_ctrl.user_set_promisc = true;
 		fctrl |= (IXGBE_FCTRL_UPE | IXGBE_FCTRL_MPE);
 		vmolr |= IXGBE_VMOLR_MPE;
-		ixgbe_vlan_promisc_enable(adapter);
+		features &= ~NETIF_F_HW_VLAN_CTAG_FILTER;
 	} else {
 		if (netdev->flags & IFF_ALLMULTI) {
 			fctrl |= IXGBE_FCTRL_MPE;
 			vmolr |= IXGBE_VMOLR_MPE;
 		}
 		hw->addr_ctrl.user_set_promisc = false;
-		ixgbe_vlan_promisc_disable(adapter);
 	}
 
 	/*
@@ -4504,7 +4504,7 @@ void ixgbe_set_rx_mode(struct net_device *netdev)
 	}
 
 	/* This is useful for sniffing bad packets. */
-	if (adapter->netdev->features & NETIF_F_RXALL) {
+	if (features & NETIF_F_RXALL) {
 		/* UPE and MPE will be handled by normal PROMISC logic
 		 * in e1000e_set_rx_mode */
 		fctrl |= (IXGBE_FCTRL_SBP | /* Receive bad packets */
@@ -4517,10 +4517,15 @@ void ixgbe_set_rx_mode(struct net_device *netdev)
 
 	IXGBE_WRITE_REG(hw, IXGBE_FCTRL, fctrl);
 
-	if (netdev->features & NETIF_F_HW_VLAN_CTAG_RX)
+	if (features & NETIF_F_HW_VLAN_CTAG_RX)
 		ixgbe_vlan_strip_enable(adapter);
 	else
 		ixgbe_vlan_strip_disable(adapter);
+
+	if (features & NETIF_F_HW_VLAN_CTAG_FILTER)
+		ixgbe_vlan_promisc_disable(adapter);
+	else
+		ixgbe_vlan_promisc_enable(adapter);
 }
 
 static void ixgbe_napi_enable_all(struct ixgbe_adapter *adapter)
@@ -8495,11 +8500,6 @@ static int ixgbe_set_features(struct net_device *netdev,
 			adapter->flags |= IXGBE_FLAG_FDIR_HASH_CAPABLE;
 	}
 
-	if (features & NETIF_F_HW_VLAN_CTAG_RX)
-		ixgbe_vlan_strip_enable(adapter);
-	else
-		ixgbe_vlan_strip_disable(adapter);
-
 	if (changed & NETIF_F_RXALL)
 		need_reset = true;
 
@@ -8516,6 +8516,9 @@ static int ixgbe_set_features(struct net_device *netdev,
 
 	if (need_reset)
 		ixgbe_do_reset(netdev);
+	else if (changed & (NETIF_F_HW_VLAN_CTAG_RX |
+			    NETIF_F_HW_VLAN_CTAG_FILTER))
+		ixgbe_set_rx_mode(netdev);
 
 	return 0;
 }
@@ -9190,7 +9193,8 @@ static int ixgbe_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 			   NETIF_F_RXCSUM |
 			   NETIF_F_HW_CSUM |
 			   NETIF_F_HW_VLAN_CTAG_TX |
-			   NETIF_F_HW_VLAN_CTAG_RX;
+			   NETIF_F_HW_VLAN_CTAG_RX |
+			   NETIF_F_HW_VLAN_CTAG_FILTER;
 
 	if (hw->mac.type >= ixgbe_mac_82599EB)
 		netdev->features |= NETIF_F_SCTP_CRC;
@@ -9204,9 +9208,6 @@ static int ixgbe_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		netdev->hw_features |= NETIF_F_NTUPLE |
 				       NETIF_F_HW_TC;
 
-	/* set this bit last since it cannot be part of hw_features */
-	netdev->features |= NETIF_F_HW_VLAN_CTAG_FILTER;
-
 	netdev->vlan_features |= NETIF_F_SG |
 				 NETIF_F_TSO |
 				 NETIF_F_TSO6 |