Commit 0c63a519 authored by Lad Prabhakar's avatar Lad Prabhakar Committed by Geert Uytterhoeven

arm64: dts: renesas: rzg2lc-smarc: Enable CRU, CSI support

Enable CRU, CSI on RZ/G2LC SMARC EVK and tie the CSI to the OV5645 sensor
using Device Tree overlay.
Signed-off-by: default avatarLad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: default avatarGeert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230413114016.16068-1-prabhakar.mahadev-lad.rj@bp.renesas.comSigned-off-by: default avatarGeert Uytterhoeven <geert+renesas@glider.be>
parent 3cf6b4c6
......@@ -79,6 +79,7 @@ dtb-$(CONFIG_ARCH_R9A07G043) += r9a07g043u11-smarc.dtb
dtb-$(CONFIG_ARCH_R9A07G043) += r9a07g043-smarc-pmod.dtbo
dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044c2-smarc.dtb
dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044c2-smarc-cru-csi-ov5645.dtbo
dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044l2-smarc.dtb
dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044l2-smarc-cru-csi-ov5645.dtbo
......
// SPDX-License-Identifier: GPL-2.0
/*
* Device Tree overlay for the RZ/G2LC SMARC EVK with
* OV5645 camera connected to CSI and CRU enabled.
*
* Copyright (C) 2023 Renesas Electronics Corp.
*/
/dts-v1/;
/plugin/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
#define OV5645_PARENT_I2C i2c0
#include "rz-smarc-cru-csi-ov5645.dtsi"
&ov5645 {
enable-gpios = <&pinctrl RZG2L_GPIO(0, 1) GPIO_ACTIVE_HIGH>;
reset-gpios = <&pinctrl RZG2L_GPIO(5, 2) GPIO_ACTIVE_LOW>;
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment