Commit 0c7665c3 authored by Max Filippov's avatar Max Filippov Committed by Michael Turquette

clk: TI CDCE706 clock synthesizer driver

The driver allows using CDCE706 in its default configuration recorded in
EEPROM and adjusting of synthesized clocks by consumers.
Signed-off-by: default avatarMax Filippov <jcmvbkbc@gmail.com>
Signed-off-by: default avatarMichael Turquette <mturquette@linaro.org>
parent c7662fc5
Bindings for Texas Instruments CDCE706 programmable 3-PLL clock
synthesizer/multiplier/divider.
Reference: http://www.ti.com/lit/ds/symlink/cdce706.pdf
I2C device node required properties:
- compatible: shall be "ti,cdce706".
- reg: i2c device address, shall be in range [0x68...0x6b].
- #clock-cells: from common clock binding; shall be set to 1.
- clocks: from common clock binding; list of parent clock
handles, shall be reference clock(s) connected to CLK_IN0
and CLK_IN1 pins.
- clock-names: shall be clk_in0 and/or clk_in1. Use clk_in0
in case of crystal oscillator or differential signal input
configuration. Use clk_in0 and clk_in1 in case of independent
single-ended LVCMOS inputs configuration.
Example:
clocks {
clk54: clk54 {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <54000000>;
};
};
...
i2c0: i2c-master@0d090000 {
...
cdce706: clock-synth@69 {
compatible = "ti,cdce706";
#clock-cells = <1>;
reg = <0x69>;
clocks = <&clk54>;
clock-names = "clk_in0";
};
};
...
simple-audio-card,codec {
...
clocks = <&cdce706 4>;
};
...@@ -9536,6 +9536,11 @@ L: linux-pm@vger.kernel.org ...@@ -9536,6 +9536,11 @@ L: linux-pm@vger.kernel.org
S: Supported S: Supported
F: drivers/thermal/ti-soc-thermal/ F: drivers/thermal/ti-soc-thermal/
TI CDCE706 CLOCK DRIVER
M: Max Filippov <jcmvbkbc@gmail.com>
S: Maintained
F: drivers/clk/clk-cdce706.c
TI CLOCK DRIVER TI CLOCK DRIVER
M: Tero Kristo <t-kristo@ti.com> M: Tero Kristo <t-kristo@ti.com>
L: linux-omap@vger.kernel.org L: linux-omap@vger.kernel.org
......
...@@ -134,6 +134,14 @@ config COMMON_CLK_PXA ...@@ -134,6 +134,14 @@ config COMMON_CLK_PXA
---help--- ---help---
Sypport for the Marvell PXA SoC. Sypport for the Marvell PXA SoC.
config COMMON_CLK_CDCE706
tristate "Clock driver for TI CDCE706 clock synthesizer"
depends on I2C
select REGMAP_I2C
select RATIONAL
---help---
This driver supports TI CDCE706 programmable 3-PLL clock synthesizer.
source "drivers/clk/qcom/Kconfig" source "drivers/clk/qcom/Kconfig"
endmenu endmenu
......
...@@ -19,6 +19,7 @@ endif ...@@ -19,6 +19,7 @@ endif
obj-$(CONFIG_COMMON_CLK_AXI_CLKGEN) += clk-axi-clkgen.o obj-$(CONFIG_COMMON_CLK_AXI_CLKGEN) += clk-axi-clkgen.o
obj-$(CONFIG_ARCH_AXXIA) += clk-axm5516.o obj-$(CONFIG_ARCH_AXXIA) += clk-axm5516.o
obj-$(CONFIG_ARCH_BCM2835) += clk-bcm2835.o obj-$(CONFIG_ARCH_BCM2835) += clk-bcm2835.o
obj-$(CONFIG_COMMON_CLK_CDCE706) += clk-cdce706.o
obj-$(CONFIG_ARCH_CLPS711X) += clk-clps711x.o obj-$(CONFIG_ARCH_CLPS711X) += clk-clps711x.o
obj-$(CONFIG_ARCH_EFM32) += clk-efm32gg.o obj-$(CONFIG_ARCH_EFM32) += clk-efm32gg.o
obj-$(CONFIG_ARCH_HIGHBANK) += clk-highbank.o obj-$(CONFIG_ARCH_HIGHBANK) += clk-highbank.o
......
This diff is collapsed.
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment