media: Revert "media: dvb-usb: Fix unexpected infinite loop in dvb_usb_read_remote_control()"

This reverts commit 2052138b.

This breaks the TeVii s480 dual DVB-S2 S660. The device has a bulk in
endpoint but no corresponding out endpoint, so the device does not pass
the "has both receive and send bulk endpoint" test.

Seemingly this device does not use dvb_usb_generic_rw() so I have tried
removing the generic_bulk_ctrl_endpoint entry, but this resulted in
different problems.

As we have no explanation yet, revert.

$ dmesg | grep -i -e dvb -e dw21 -e usb\ 4
[    0.999122] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.023123] usb 4-1: new high-speed USB device number 2 using ehci-pci
[    1.130247] usb 1-1: New USB device found, idVendor=9022, idProduct=d482,
+bcdDevice= 0.01
[    1.130257] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.152323] usb 4-1: New USB device found, idVendor=9022, idProduct=d481,
+bcdDevice= 0.01
[    1.152329] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    6.701033] dvb-usb: found a 'TeVii S480.2 USB' in cold state, will try to
+load a firmware
[    6.701178] dvb-usb: downloading firmware from file 'dvb-usb-s660.fw'
[    6.701179] dw2102: start downloading DW210X firmware
[    6.703715] dvb-usb: found a 'Microsoft Xbox One Digital TV Tuner' in cold
+state, will try to load a firmware
[    6.703974] dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw'
[    6.756432] usb 1-1: USB disconnect, device number 2
[    6.862119] dvb-usb: found a 'TeVii S480.2 USB' in warm state.
[    6.862194] dvb-usb: TeVii S480.2 USB error while loading driver (-22)
[    6.862209] dvb-usb: found a 'TeVii S480.1 USB' in cold state, will try to
+load a firmware
[    6.862244] dvb-usb: downloading firmware from file 'dvb-usb-s660.fw'
[    6.862245] dw2102: start downloading DW210X firmware
[    6.914811] usb 4-1: USB disconnect, device number 2
[    7.014131] dvb-usb: found a 'TeVii S480.1 USB' in warm state.
[    7.014487] dvb-usb: TeVii S480.1 USB error while loading driver (-22)
[    7.014538] usbcore: registered new interface driver dw2102

Closes: https://lore.kernel.org/stable/20240801165146.38991f60@mir/

Fixes: 2052138b ("media: dvb-usb: Fix unexpected infinite loop in dvb_usb_read_remote_control()")
Reported-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
Cc: stable@vger.kernel.org
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

drivers/media/usb/dvb-usb/dvb-usb-init.c

@@ -23,40 +23,11 @@ static int dvb_usb_force_pid_filter_usage;
 module_param_named(force_pid_filter_usage, dvb_usb_force_pid_filter_usage, int, 0444);
 MODULE_PARM_DESC(force_pid_filter_usage, "force all dvb-usb-devices to use a PID filter, if any (default: 0).");
 
-static int dvb_usb_check_bulk_endpoint(struct dvb_usb_device *d, u8 endpoint)
-{
-	if (endpoint) {
-		int ret;
-
-		ret = usb_pipe_type_check(d->udev, usb_sndbulkpipe(d->udev, endpoint));
-		if (ret)
-			return ret;
-		ret = usb_pipe_type_check(d->udev, usb_rcvbulkpipe(d->udev, endpoint));
-		if (ret)
-			return ret;
-	}
-	return 0;
-}
-
-static void dvb_usb_clear_halt(struct dvb_usb_device *d, u8 endpoint)
-{
-	if (endpoint) {
-		usb_clear_halt(d->udev, usb_sndbulkpipe(d->udev, endpoint));
-		usb_clear_halt(d->udev, usb_rcvbulkpipe(d->udev, endpoint));
-	}
-}
-
 static int dvb_usb_adapter_init(struct dvb_usb_device *d, short *adapter_nrs)
 {
 	struct dvb_usb_adapter *adap;
 	int ret, n, o;
 
-	ret = dvb_usb_check_bulk_endpoint(d, d->props.generic_bulk_ctrl_endpoint);
-	if (ret)
-		return ret;
-	ret = dvb_usb_check_bulk_endpoint(d, d->props.generic_bulk_ctrl_endpoint_response);
-	if (ret)
-		return ret;
 	for (n = 0; n < d->props.num_adapters; n++) {
 		adap = &d->adapter[n];
 		adap->dev = d;
@@ -132,8 +103,10 @@ static int dvb_usb_adapter_init(struct dvb_usb_device *d, short *adapter_nrs)
 	 * when reloading the driver w/o replugging the device
 	 * sometimes a timeout occurs, this helps
 	 */
-	dvb_usb_clear_halt(d, d->props.generic_bulk_ctrl_endpoint);
-	dvb_usb_clear_halt(d, d->props.generic_bulk_ctrl_endpoint_response);
+	if (d->props.generic_bulk_ctrl_endpoint != 0) {
+		usb_clear_halt(d->udev, usb_sndbulkpipe(d->udev, d->props.generic_bulk_ctrl_endpoint));
+		usb_clear_halt(d->udev, usb_rcvbulkpipe(d->udev, d->props.generic_bulk_ctrl_endpoint));
+	}
 
 	return 0;