ARM: dts: imx6qdl-sr-som: split out Broadcom Wi-Fi support

There are two variants of the imx6qdl som: one with Broadcom Wi-Fi and
another with Texas Instruments Wi-Fi.  The two Wi-Fi devices require
different DT bindings, so it's necessary to split out the Broadcom
specifics.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

arch/arm/boot/dts/imx6dl-cubox-i.dts

@@ -42,6 +42,7 @@
 
 #include "imx6dl.dtsi"
 #include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-brcm.dtsi"
 #include "imx6qdl-cubox-i.dtsi"
 
 / {

arch/arm/boot/dts/imx6dl-hummingboard.dts

@@ -43,6 +43,7 @@
 
 #include "imx6dl.dtsi"
 #include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-brcm.dtsi"
 #include "imx6qdl-hummingboard.dtsi"
 
 / {

arch/arm/boot/dts/imx6q-cubox-i.dts

@@ -42,6 +42,7 @@
 
 #include "imx6q.dtsi"
 #include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-brcm.dtsi"
 #include "imx6qdl-cubox-i.dtsi"
 
 / {

arch/arm/boot/dts/imx6q-h100.dts

@@ -43,6 +43,7 @@
 
 #include "imx6q.dtsi"
 #include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-brcm.dtsi"
 
 / {
 	model = "Auvidea H100";

arch/arm/boot/dts/imx6q-hummingboard.dts

@@ -43,6 +43,7 @@
 
 #include "imx6q.dtsi"
 #include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-brcm.dtsi"
 #include "imx6qdl-hummingboard.dtsi"
 
 / {

arch/arm/boot/dts/imx6qdl-sr-som-brcm.dtsi

+/*
+ * Copyright (C) 2013,2014 Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include <dt-bindings/gpio/gpio.h>
+/ {
+	clk_sdio: sdio-clock {
+		compatible = "gpio-gate-clock";
+		#clock-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_microsom_brcm_osc>;
+		enable-gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_brcm: brcm-reg {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio3 19 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_microsom_brcm_reg>;
+		regulator-name = "brcm_reg";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <200000>;
+	};
+
+	usdhc1_pwrseq: usdhc1_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio5 26 GPIO_ACTIVE_LOW>,
+			      <&gpio6 0 GPIO_ACTIVE_LOW>;
+		clocks = <&clk_sdio>;
+		clock-names = "ext_clock";
+	};
+};
+
+&iomuxc {
+	microsom {
+		pinctrl_microsom_brcm_bt: microsom-brcm-bt {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT14__GPIO6_IO00	0x40013070
+				MX6QDL_PAD_CSI0_DAT15__GPIO6_IO01	0x40013070
+				MX6QDL_PAD_CSI0_DAT18__GPIO6_IO04	0x40013070
+			>;
+		};
+
+		pinctrl_microsom_brcm_osc: microsom-brcm-osc {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05	0x40013070
+			>;
+		};
+
+		pinctrl_microsom_brcm_reg: microsom-brcm-reg {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x40013070
+			>;
+		};
+
+		pinctrl_microsom_brcm_wifi: microsom-brcm-wifi {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_8__XTALOSC_REF_CLK_32K	0x1b0b0
+				MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20	0x40013070
+				MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26	0x40013070
+				MX6QDL_PAD_CSI0_DAT9__GPIO5_IO27	0x40013070
+			>;
+		};
+
+		pinctrl_microsom_uart4: microsom-uart4 {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1
+				MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1
+				MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1
+				MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1
+			>;
+		};
+
+		pinctrl_microsom_usdhc1: microsom-usdhc1 {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_CMD__SD1_CMD    0x17059
+				MX6QDL_PAD_SD1_CLK__SD1_CLK    0x10059
+				MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059
+				MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059
+				MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059
+				MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059
+			>;
+		};
+	};
+};
+
+/* UART4 - Connected to optional BRCM Wifi/BT/FM */
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_microsom_brcm_bt &pinctrl_microsom_uart4>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+/* USDHC1 - Connected to optional BRCM Wifi/BT/FM */
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_microsom_brcm_wifi &pinctrl_microsom_usdhc1>;
+	bus-width = <4>;
+	mmc-pwrseq = <&usdhc1_pwrseq>;
+	keep-power-in-suspend;
+	no-1-8-v;
+	non-removable;
+	vmmc-supply = <&reg_brcm>;
+	status = "okay";
+};

arch/arm/boot/dts/imx6qdl-sr-som.dtsi

@@ -39,35 +39,6 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 #include <dt-bindings/gpio/gpio.h>
-/ {
-	clk_sdio: sdio-clock {
-		compatible = "gpio-gate-clock";
-		#clock-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_microsom_brcm_osc>;
-		enable-gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>;
-	};
-
-	reg_brcm: brcm-reg {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio3 19 0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_microsom_brcm_reg>;
-		regulator-name = "brcm_reg";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		startup-delay-us = <200000>;
-	};
-
-	usdhc1_pwrseq: usdhc1_pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		reset-gpios = <&gpio5 26 GPIO_ACTIVE_LOW>,
-			      <&gpio6 0 GPIO_ACTIVE_LOW>;
-		clocks = <&clk_sdio>;
-		clock-names = "ext_clock";
-	};
-};
 
 &fec {
 	pinctrl-names = "default";
@@ -80,35 +51,6 @@ &fec {
 
 &iomuxc {
 	microsom {
-		pinctrl_microsom_brcm_bt: microsom-brcm-bt {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT14__GPIO6_IO00	0x40013070
-				MX6QDL_PAD_CSI0_DAT15__GPIO6_IO01	0x40013070
-				MX6QDL_PAD_CSI0_DAT18__GPIO6_IO04	0x40013070
-			>;
-		};
-
-		pinctrl_microsom_brcm_osc: microsom-brcm-osc {
-			fsl,pins = <
-				MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05	0x40013070
-			>;
-		};
-
-		pinctrl_microsom_brcm_reg: microsom-brcm-reg {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x40013070
-			>;
-		};
-
-		pinctrl_microsom_brcm_wifi: microsom-brcm-wifi {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_8__XTALOSC_REF_CLK_32K	0x1b0b0
-				MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20	0x40013070
-				MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26	0x40013070
-				MX6QDL_PAD_CSI0_DAT9__GPIO5_IO27	0x40013070
-			>;
-		};
-
 		pinctrl_microsom_enet_ar8035: microsom-enet-ar8035 {
 			fsl,pins = <
 				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b8b0
@@ -159,26 +101,6 @@ MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
 				MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
 			>;
 		};
-
-		pinctrl_microsom_uart4: microsom-uart4 {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1
-				MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1
-				MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1
-				MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1
-			>;
-		};
-
-		pinctrl_microsom_usdhc1: microsom-usdhc1 {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_CMD__SD1_CMD    0x17059
-				MX6QDL_PAD_SD1_CLK__SD1_CLK    0x10059
-				MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059
-				MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059
-				MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059
-				MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059
-			>;
-		};
 	};
 };
 
@@ -187,24 +109,3 @@ &uart1 {
 	pinctrl-0 = <&pinctrl_microsom_uart1>;
 	status = "okay";
 };
-
-/* UART4 - Connected to optional BRCM Wifi/BT/FM */
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_microsom_brcm_bt &pinctrl_microsom_uart4>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-/* USDHC1 - Connected to optional BRCM Wifi/BT/FM */
-&usdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_microsom_brcm_wifi &pinctrl_microsom_usdhc1>;
-	bus-width = <4>;
-	mmc-pwrseq = <&usdhc1_pwrseq>;
-	keep-power-in-suspend;
-	no-1-8-v;
-	non-removable;
-	vmmc-supply = <&reg_brcm>;
-	status = "okay";
-};