Merge branch 'drm_bridge_for_4.8' of https://github.com/boddob/linux into drm-next

This is an update to the previous drm bridge pull request. The ADV7511
driver's conversion from slave encoder to bridge meant that its users
(the rcar-du kms driver) should use the bridge interface too. This pull
request now also contains a commit that updates the rcar-du's hdmi encoder
interface from slave encoder to bridge.

The other updates are as before:

- Converts the ADV7511 i2c slave encoder driver to a bridge driver.
  Adds support for the ADV7533 bridge chip.
- Add bridge driver for TC358767 (DSI/DPI to eDP) encoder chips.

* 'drm_bridge_for_4.8' of https://github.com/boddob/linux:
  drm: rcar-du: Remove i2c slave encoder interface for hdmi encoder
  drm/bridge: tc358767: Add DPI to eDP bridge driver
  dt-bindings: tc358767: add DT documentation
  dt-bindings: drm/bridge: Update bindings for ADV7533
  drm/bridge: adv7533: Change number of DSI lanes dynamically
  drm/bridge: adv7533: Use internal timing generator
  drm/bridge: adv7533: Create a MIPI DSI device
  drm/bridge: adv7533: Initial support for ADV7533
  drm/bridge: adv7511: Fix mutex deadlock when interrupts are disabled
  drm/i2c: adv7511: Move to bridge folder
  drm/i2c: adv7511: Convert to drm_bridge

Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt

-Analog Device ADV7511(W)/13 HDMI Encoders
+Analog Device ADV7511(W)/13/33 HDMI Encoders
 -----------------------------------------
 
-The ADV7511, ADV7511W and ADV7513 are HDMI audio and video transmitters
+The ADV7511, ADV7511W, ADV7513 and ADV7533 are HDMI audio and video transmitters
 compatible with HDMI 1.4 and DVI 1.0. They support color space conversion,
-S/PDIF, CEC and HDCP.
+S/PDIF, CEC and HDCP. ADV7533 supports the DSI interface for input pixels, while
+the others support RGB interface.
 
 Required properties:
 
-- compatible: Should be one of "adi,adv7511", "adi,adv7511w" or "adi,adv7513"
+- compatible: Should be one of:
+		"adi,adv7511"
+		"adi,adv7511w"
+		"adi,adv7513"
+		"adi,adv7533"
+
 - reg: I2C slave address
 
 The ADV7511 supports a large number of input data formats that differ by their
@@ -32,6 +38,11 @@ The following input format properties are required except in "rgb 1x" and
 - adi,input-justification: The input bit justification ("left", "evenly",
   "right").
 
+The following properties are required for ADV7533:
+
+- adi,dsi-lanes: Number of DSI data lanes connected to the DSI host. It should
+  be one of 1, 2, 3 or 4.
+
 Optional properties:
 
 - interrupts: Specifier for the ADV7511 interrupt
@@ -42,13 +53,18 @@ Optional properties:
 - adi,embedded-sync: The input uses synchronization signals embedded in the
   data stream (similar to BT.656). Defaults to separate H/V synchronization
   signals.
+- adi,disable-timing-generator: Only for ADV7533. Disables the internal timing
+  generator. The chip will rely on the sync signals in the DSI data lanes,
+  rather than generate its own timings for HDMI output.
 
 Required nodes:
 
 The ADV7511 has two video ports. Their connections are modelled using the OF
 graph bindings specified in Documentation/devicetree/bindings/graph.txt.
 
-- Video port 0 for the RGB or YUV input
+- Video port 0 for the RGB, YUV or DSI input. In the case of ADV7533, the
+  remote endpoint phandle should be a reference to a valid mipi_dsi_host device
+  node.
 - Video port 1 for the HDMI output
 
 

Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.txt

+Toshiba TC358767 eDP bridge bindings
+
+Required properties:
+ - compatible: "toshiba,tc358767"
+ - reg: i2c address of the bridge, 0x68 or 0x0f, depending on bootstrap pins
+ - clock-names: should be "ref"
+ - clocks: OF device-tree clock specification for refclk input. The reference
+   clock rate must be 13 MHz, 19.2 MHz, 26 MHz, or 38.4 MHz.
+
+Optional properties:
+ - shutdown-gpios: OF device-tree gpio specification for SD pin
+                   (active high shutdown input)
+ - reset-gpios: OF device-tree gpio specification for RSTX pin
+                (active low system reset)
+ - ports: the ports node can contain video interface port nodes to connect
+   to a DPI/DSI source and to an eDP/DP sink according to [1][2]:
+    - port@0: DSI input port
+    - port@1: DPI input port
+    - port@2: eDP/DP output port
+
+[1]: Documentation/devicetree/bindings/graph.txt
+[2]: Documentation/devicetree/bindings/media/video-interfaces.txt
+
+Example:
+	edp-bridge@68 {
+		compatible = "toshiba,tc358767";
+		reg = <0x68>;
+		shutdown-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
+		clock-names = "ref";
+		clocks = <&edp_refclk>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@1 {
+				reg = <1>;
+
+				bridge_in: endpoint {
+					remote-endpoint = <&dpi_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				bridge_out: endpoint {
+					remote-endpoint = <&panel_in>;
+				};
+			};
+		};
+	};

drivers/gpu/drm/bridge/Kconfig

@@ -58,6 +58,17 @@ config DRM_SII902X
 	---help---
 	  Silicon Image sii902x bridge chip driver.
 
+config DRM_TOSHIBA_TC358767
+	tristate "Toshiba TC358767 eDP bridge"
+	depends on OF
+	select DRM_KMS_HELPER
+	select REGMAP_I2C
+	select DRM_PANEL
+	---help---
+	  Toshiba TC358767 eDP bridge chip driver.
+
 source "drivers/gpu/drm/bridge/analogix/Kconfig"
 
+source "drivers/gpu/drm/bridge/adv7511/Kconfig"
+
 endmenu

drivers/gpu/drm/bridge/Makefile

@@ -6,4 +6,6 @@ obj-$(CONFIG_DRM_DW_HDMI_AHB_AUDIO) += dw-hdmi-ahb-audio.o
 obj-$(CONFIG_DRM_NXP_PTN3460) += nxp-ptn3460.o
 obj-$(CONFIG_DRM_PARADE_PS8622) += parade-ps8622.o
 obj-$(CONFIG_DRM_SII902X) += sii902x.o
+obj-$(CONFIG_DRM_TOSHIBA_TC358767) += tc358767.o
 obj-$(CONFIG_DRM_ANALOGIX_DP) += analogix/
+obj-$(CONFIG_DRM_I2C_ADV7511) += adv7511/

drivers/gpu/drm/bridge/adv7511/Kconfig

+config DRM_I2C_ADV7511
+	tristate "AV7511 encoder"
+	depends on OF
+	select DRM_KMS_HELPER
+	select REGMAP_I2C
+	help
+	  Support for the Analog Device ADV7511(W) and ADV7513 HDMI encoders.
+
+config DRM_I2C_ADV7533
+	bool "ADV7533 encoder"
+	depends on DRM_I2C_ADV7511
+	select DRM_MIPI_DSI
+	default y
+	help
+	  Support for the Analog Devices ADV7533 DSI to HDMI encoder.

drivers/gpu/drm/bridge/adv7511/Makefile

+adv7511-y := adv7511_drv.o
+adv7511-$(CONFIG_DRM_I2C_ADV7533) += adv7533.o
+obj-$(CONFIG_DRM_I2C_ADV7511) += adv7511.o

drivers/gpu/drm/i2c/adv7511.h → drivers/gpu/drm/bridge/adv7511/adv7511.h

@@ -10,6 +10,11 @@
 #define __DRM_I2C_ADV7511_H__
 
 #include <linux/hdmi.h>
+#include <linux/i2c.h>
+#include <linux/regmap.h>
+
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_mipi_dsi.h>
 
 #define ADV7511_REG_CHIP_REVISION		0x00
 #define ADV7511_REG_N0				0x01
@@ -286,4 +291,102 @@ struct adv7511_video_config {
 	struct hdmi_avi_infoframe avi_infoframe;
 };
 
+enum adv7511_type {
+	ADV7511,
+	ADV7533,
+};
+
+struct adv7511 {
+	struct i2c_client *i2c_main;
+	struct i2c_client *i2c_edid;
+	struct i2c_client *i2c_cec;
+
+	struct regmap *regmap;
+	struct regmap *regmap_cec;
+	enum drm_connector_status status;
+	bool powered;
+
+	struct drm_display_mode curr_mode;
+
+	unsigned int f_tmds;
+
+	unsigned int current_edid_segment;
+	uint8_t edid_buf[256];
+	bool edid_read;
+
+	wait_queue_head_t wq;
+	struct drm_bridge bridge;
+	struct drm_connector connector;
+
+	bool embedded_sync;
+	enum adv7511_sync_polarity vsync_polarity;
+	enum adv7511_sync_polarity hsync_polarity;
+	bool rgb;
+
+	struct edid *edid;
+
+	struct gpio_desc *gpio_pd;
+
+	/* ADV7533 DSI RX related params */
+	struct device_node *host_node;
+	struct mipi_dsi_device *dsi;
+	u8 num_dsi_lanes;
+	bool use_timing_gen;
+
+	enum adv7511_type type;
+};
+
+#ifdef CONFIG_DRM_I2C_ADV7533
+void adv7533_dsi_power_on(struct adv7511 *adv);
+void adv7533_dsi_power_off(struct adv7511 *adv);
+void adv7533_mode_set(struct adv7511 *adv, struct drm_display_mode *mode);
+int adv7533_patch_registers(struct adv7511 *adv);
+void adv7533_uninit_cec(struct adv7511 *adv);
+int adv7533_init_cec(struct adv7511 *adv);
+int adv7533_attach_dsi(struct adv7511 *adv);
+void adv7533_detach_dsi(struct adv7511 *adv);
+int adv7533_parse_dt(struct device_node *np, struct adv7511 *adv);
+#else
+static inline void adv7533_dsi_power_on(struct adv7511 *adv)
+{
+}
+
+static inline void adv7533_dsi_power_off(struct adv7511 *adv)
+{
+}
+
+static inline void adv7533_mode_set(struct adv7511 *adv,
+				    struct drm_display_mode *mode)
+{
+}
+
+static inline int adv7533_patch_registers(struct adv7511 *adv)
+{
+	return -ENODEV;
+}
+
+static inline void adv7533_uninit_cec(struct adv7511 *adv)
+{
+}
+
+static inline int adv7533_init_cec(struct adv7511 *adv)
+{
+	return -ENODEV;
+}
+
+static inline int adv7533_attach_dsi(struct adv7511 *adv)
+{
+	return -ENODEV;
+}
+
+static inline void adv7533_detach_dsi(struct adv7511 *adv)
+{
+}
+
+static inline int adv7533_parse_dt(struct device_node *np, struct adv7511 *adv)
+{
+	return -ENODEV;
+}
+#endif
+
 #endif /* __DRM_I2C_ADV7511_H__ */

drivers/gpu/drm/bridge/adv7511/adv7533.c

+/*
+ * Copyright (c) 2016, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/of_graph.h>
+
+#include "adv7511.h"
+
+static const struct reg_sequence adv7533_fixed_registers[] = {
+	{ 0x16, 0x20 },
+	{ 0x9a, 0xe0 },
+	{ 0xba, 0x70 },
+	{ 0xde, 0x82 },
+	{ 0xe4, 0x40 },
+	{ 0xe5, 0x80 },
+};
+
+static const struct reg_sequence adv7533_cec_fixed_registers[] = {
+	{ 0x15, 0xd0 },
+	{ 0x17, 0xd0 },
+	{ 0x24, 0x20 },
+	{ 0x57, 0x11 },
+};
+
+static const struct regmap_config adv7533_cec_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.max_register = 0xff,
+	.cache_type = REGCACHE_RBTREE,
+};
+
+static void adv7511_dsi_config_timing_gen(struct adv7511 *adv)
+{
+	struct mipi_dsi_device *dsi = adv->dsi;
+	struct drm_display_mode *mode = &adv->curr_mode;
+	unsigned int hsw, hfp, hbp, vsw, vfp, vbp;
+	u8 clock_div_by_lanes[] = { 6, 4, 3 };	/* 2, 3, 4 lanes */
+
+	hsw = mode->hsync_end - mode->hsync_start;
+	hfp = mode->hsync_start - mode->hdisplay;
+	hbp = mode->htotal - mode->hsync_end;
+	vsw = mode->vsync_end - mode->vsync_start;
+	vfp = mode->vsync_start - mode->vdisplay;
+	vbp = mode->vtotal - mode->vsync_end;
+
+	/* set pixel clock divider mode */
+	regmap_write(adv->regmap_cec, 0x16,
+		     clock_div_by_lanes[dsi->lanes - 2] << 3);
+
+	/* horizontal porch params */
+	regmap_write(adv->regmap_cec, 0x28, mode->htotal >> 4);
+	regmap_write(adv->regmap_cec, 0x29, (mode->htotal << 4) & 0xff);
+	regmap_write(adv->regmap_cec, 0x2a, hsw >> 4);
+	regmap_write(adv->regmap_cec, 0x2b, (hsw << 4) & 0xff);
+	regmap_write(adv->regmap_cec, 0x2c, hfp >> 4);
+	regmap_write(adv->regmap_cec, 0x2d, (hfp << 4) & 0xff);
+	regmap_write(adv->regmap_cec, 0x2e, hbp >> 4);
+	regmap_write(adv->regmap_cec, 0x2f, (hbp << 4) & 0xff);
+
+	/* vertical porch params */
+	regmap_write(adv->regmap_cec, 0x30, mode->vtotal >> 4);
+	regmap_write(adv->regmap_cec, 0x31, (mode->vtotal << 4) & 0xff);
+	regmap_write(adv->regmap_cec, 0x32, vsw >> 4);
+	regmap_write(adv->regmap_cec, 0x33, (vsw << 4) & 0xff);
+	regmap_write(adv->regmap_cec, 0x34, vfp >> 4);
+	regmap_write(adv->regmap_cec, 0x35, (vfp << 4) & 0xff);
+	regmap_write(adv->regmap_cec, 0x36, vbp >> 4);
+	regmap_write(adv->regmap_cec, 0x37, (vbp << 4) & 0xff);
+}
+
+void adv7533_dsi_power_on(struct adv7511 *adv)
+{
+	struct mipi_dsi_device *dsi = adv->dsi;
+
+	if (adv->use_timing_gen)
+		adv7511_dsi_config_timing_gen(adv);
+
+	/* set number of dsi lanes */
+	regmap_write(adv->regmap_cec, 0x1c, dsi->lanes << 4);
+
+	if (adv->use_timing_gen) {
+		/* reset internal timing generator */
+		regmap_write(adv->regmap_cec, 0x27, 0xcb);
+		regmap_write(adv->regmap_cec, 0x27, 0x8b);
+		regmap_write(adv->regmap_cec, 0x27, 0xcb);
+	} else {
+		/* disable internal timing generator */
+		regmap_write(adv->regmap_cec, 0x27, 0x0b);
+	}
+
+	/* enable hdmi */
+	regmap_write(adv->regmap_cec, 0x03, 0x89);
+	/* disable test mode */
+	regmap_write(adv->regmap_cec, 0x55, 0x00);
+
+	regmap_register_patch(adv->regmap_cec, adv7533_cec_fixed_registers,
+			      ARRAY_SIZE(adv7533_cec_fixed_registers));
+}
+
+void adv7533_dsi_power_off(struct adv7511 *adv)
+{
+	/* disable hdmi */
+	regmap_write(adv->regmap_cec, 0x03, 0x0b);
+	/* disable internal timing generator */
+	regmap_write(adv->regmap_cec, 0x27, 0x0b);
+}
+
+void adv7533_mode_set(struct adv7511 *adv, struct drm_display_mode *mode)
+{
+	struct mipi_dsi_device *dsi = adv->dsi;
+	int lanes, ret;
+
+	if (adv->num_dsi_lanes != 4)
+		return;
+
+	if (mode->clock > 80000)
+		lanes = 4;
+	else
+		lanes = 3;
+
+	if (lanes != dsi->lanes) {
+		mipi_dsi_detach(dsi);
+		dsi->lanes = lanes;
+		ret = mipi_dsi_attach(dsi);
+		if (ret)
+			dev_err(&dsi->dev, "failed to change host lanes\n");
+	}
+}
+
+int adv7533_patch_registers(struct adv7511 *adv)
+{
+	return regmap_register_patch(adv->regmap,
+				     adv7533_fixed_registers,
+				     ARRAY_SIZE(adv7533_fixed_registers));
+}
+
+void adv7533_uninit_cec(struct adv7511 *adv)
+{
+	i2c_unregister_device(adv->i2c_cec);
+}
+
+static const int cec_i2c_addr = 0x78;
+
+int adv7533_init_cec(struct adv7511 *adv)
+{
+	int ret;
+
+	adv->i2c_cec = i2c_new_dummy(adv->i2c_main->adapter, cec_i2c_addr >> 1);
+	if (!adv->i2c_cec)
+		return -ENOMEM;
+
+	adv->regmap_cec = devm_regmap_init_i2c(adv->i2c_cec,
+					&adv7533_cec_regmap_config);
+	if (IS_ERR(adv->regmap_cec)) {
+		ret = PTR_ERR(adv->regmap_cec);
+		goto err;
+	}
+
+	ret = regmap_register_patch(adv->regmap_cec,
+				    adv7533_cec_fixed_registers,
+				    ARRAY_SIZE(adv7533_cec_fixed_registers));
+	if (ret)
+		goto err;
+
+	return 0;
+err:
+	adv7533_uninit_cec(adv);
+	return ret;
+}
+
+int adv7533_attach_dsi(struct adv7511 *adv)
+{
+	struct device *dev = &adv->i2c_main->dev;
+	struct mipi_dsi_host *host;
+	struct mipi_dsi_device *dsi;
+	int ret = 0;
+	const struct mipi_dsi_device_info info = { .type = "adv7533",
+						   .channel = 0,
+						   .node = NULL,
+						 };
+
+	host = of_find_mipi_dsi_host_by_node(adv->host_node);
+	if (!host) {
+		dev_err(dev, "failed to find dsi host\n");
+		return -EPROBE_DEFER;
+	}
+
+	dsi = mipi_dsi_device_register_full(host, &info);
+	if (IS_ERR(dsi)) {
+		dev_err(dev, "failed to create dsi device\n");
+		ret = PTR_ERR(dsi);
+		goto err_dsi_device;
+	}
+
+	adv->dsi = dsi;
+
+	dsi->lanes = adv->num_dsi_lanes;
+	dsi->format = MIPI_DSI_FMT_RGB888;
+	dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_SYNC_PULSE |
+			  MIPI_DSI_MODE_EOT_PACKET | MIPI_DSI_MODE_VIDEO_HSE;
+
+	ret = mipi_dsi_attach(dsi);
+	if (ret < 0) {
+		dev_err(dev, "failed to attach dsi to host\n");
+		goto err_dsi_attach;
+	}
+
+	return 0;
+
+err_dsi_attach:
+	mipi_dsi_device_unregister(dsi);
+err_dsi_device:
+	return ret;
+}
+
+void adv7533_detach_dsi(struct adv7511 *adv)
+{
+	mipi_dsi_detach(adv->dsi);
+	mipi_dsi_device_unregister(adv->dsi);
+}
+
+int adv7533_parse_dt(struct device_node *np, struct adv7511 *adv)
+{
+	u32 num_lanes;
+	struct device_node *endpoint;
+
+	of_property_read_u32(np, "adi,dsi-lanes", &num_lanes);
+
+	if (num_lanes < 1 || num_lanes > 4)
+		return -EINVAL;
+
+	adv->num_dsi_lanes = num_lanes;
+
+	endpoint = of_graph_get_next_endpoint(np, NULL);
+	if (!endpoint)
+		return -ENODEV;
+
+	adv->host_node = of_graph_get_remote_port_parent(endpoint);
+	if (!adv->host_node) {
+		of_node_put(endpoint);
+		return -ENODEV;
+	}
+
+	of_node_put(endpoint);
+	of_node_put(adv->host_node);
+
+	adv->use_timing_gen = !of_property_read_bool(np,
+						"adi,disable-timing-generator");
+
+	/* TODO: Check if these need to be parsed by DT or not */
+	adv->rgb = true;
+	adv->embedded_sync = false;
+
+	return 0;
+}

drivers/gpu/drm/i2c/Kconfig

 menu "I2C encoder or helper chips"
      depends on DRM && DRM_KMS_HELPER && I2C
 
-config DRM_I2C_ADV7511
-	tristate "AV7511 encoder"
-	select REGMAP_I2C
-	help
-	  Support for the Analog Device ADV7511(W) and ADV7513 HDMI encoders.
-
 config DRM_I2C_CH7006
 	tristate "Chrontel ch7006 TV encoder"
 	default m if DRM_NOUVEAU

drivers/gpu/drm/i2c/Makefile

 ccflags-y := -Iinclude/drm
 
-obj-$(CONFIG_DRM_I2C_ADV7511) += adv7511.o
-
 ch7006-y := ch7006_drv.o ch7006_mode.o
 obj-$(CONFIG_DRM_I2C_CH7006) += ch7006.o
 

drivers/gpu/drm/rcar-du/Makefile

@@ -7,8 +7,8 @@ rcar-du-drm-y := rcar_du_crtc.o \
 		 rcar_du_plane.o \
 		 rcar_du_vgacon.o
 
-rcar-du-drm-$(CONFIG_DRM_RCAR_HDMI)	+= rcar_du_hdmicon.o \
-					   rcar_du_hdmienc.o
+rcar-du-drm-$(CONFIG_DRM_RCAR_HDMI)	+= rcar_du_hdmienc.o
+
 rcar-du-drm-$(CONFIG_DRM_RCAR_LVDS)	+= rcar_du_lvdsenc.o
 
 rcar-du-drm-$(CONFIG_DRM_RCAR_VSP)	+= rcar_du_vsp.o

drivers/gpu/drm/rcar-du/rcar_du_encoder.c

@@ -19,7 +19,6 @@
 
 #include "rcar_du_drv.h"
 #include "rcar_du_encoder.h"
-#include "rcar_du_hdmicon.h"
 #include "rcar_du_hdmienc.h"
 #include "rcar_du_kms.h"
 #include "rcar_du_lvdscon.h"
@@ -174,7 +173,7 @@ int rcar_du_encoder_init(struct rcar_du_device *rcdu,
 		break;
 
 	case DRM_MODE_ENCODER_TMDS:
-		ret = rcar_du_hdmi_connector_init(rcdu, renc);
+		/* connector managed by the bridge driver */
 		break;
 
 	default:

drivers/gpu/drm/rcar-du/rcar_du_encoder.h

@@ -15,7 +15,6 @@
 #define __RCAR_DU_ENCODER_H__
 
 #include <drm/drm_crtc.h>
-#include <drm/drm_encoder_slave.h>
 
 struct rcar_du_device;
 struct rcar_du_hdmienc;
@@ -30,16 +29,16 @@ enum rcar_du_encoder_type {
 };
 
 struct rcar_du_encoder {
-	struct drm_encoder_slave slave;
+	struct drm_encoder base;
 	enum rcar_du_output output;
 	struct rcar_du_hdmienc *hdmi;
 	struct rcar_du_lvdsenc *lvds;
 };
 
 #define to_rcar_encoder(e) \
-	container_of(e, struct rcar_du_encoder, slave.base)
+	container_of(e, struct rcar_du_encoder, base)
 
-#define rcar_encoder_to_drm_encoder(e)	(&(e)->slave.base)
+#define rcar_encoder_to_drm_encoder(e)	(&(e)->base)
 
 struct rcar_du_connector {
 	struct drm_connector connector;

drivers/gpu/drm/rcar-du/rcar_du_hdmicon.c

-/*
- * R-Car Display Unit HDMI Connector
- *
- * Copyright (C) 2014 Renesas Electronics Corporation
- *
- * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <drm/drmP.h>
-#include <drm/drm_atomic_helper.h>
-#include <drm/drm_crtc.h>
-#include <drm/drm_crtc_helper.h>
-#include <drm/drm_encoder_slave.h>
-
-#include "rcar_du_drv.h"
-#include "rcar_du_encoder.h"
-#include "rcar_du_hdmicon.h"
-#include "rcar_du_kms.h"
-
-#define to_slave_funcs(e)	(to_rcar_encoder(e)->slave.slave_funcs)
-
-static int rcar_du_hdmi_connector_get_modes(struct drm_connector *connector)
-{
-	struct rcar_du_connector *con = to_rcar_connector(connector);
-	struct drm_encoder *encoder = rcar_encoder_to_drm_encoder(con->encoder);
-	const struct drm_encoder_slave_funcs *sfuncs = to_slave_funcs(encoder);
-
-	if (sfuncs->get_modes == NULL)
-		return 0;
-
-	return sfuncs->get_modes(encoder, connector);
-}
-
-static int rcar_du_hdmi_connector_mode_valid(struct drm_connector *connector,
-					     struct drm_display_mode *mode)
-{
-	struct rcar_du_connector *con = to_rcar_connector(connector);
-	struct drm_encoder *encoder = rcar_encoder_to_drm_encoder(con->encoder);
-	const struct drm_encoder_slave_funcs *sfuncs = to_slave_funcs(encoder);
-
-	if (sfuncs->mode_valid == NULL)
-		return MODE_OK;
-
-	return sfuncs->mode_valid(encoder, mode);
-}
-
-static const struct drm_connector_helper_funcs connector_helper_funcs = {
-	.get_modes = rcar_du_hdmi_connector_get_modes,
-	.mode_valid = rcar_du_hdmi_connector_mode_valid,
-};
-
-static enum drm_connector_status
-rcar_du_hdmi_connector_detect(struct drm_connector *connector, bool force)
-{
-	struct rcar_du_connector *con = to_rcar_connector(connector);
-	struct drm_encoder *encoder = rcar_encoder_to_drm_encoder(con->encoder);
-	const struct drm_encoder_slave_funcs *sfuncs = to_slave_funcs(encoder);
-
-	if (sfuncs->detect == NULL)
-		return connector_status_unknown;
-
-	return sfuncs->detect(encoder, connector);
-}
-
-static const struct drm_connector_funcs connector_funcs = {
-	.dpms = drm_atomic_helper_connector_dpms,
-	.reset = drm_atomic_helper_connector_reset,
-	.detect = rcar_du_hdmi_connector_detect,
-	.fill_modes = drm_helper_probe_single_connector_modes,
-	.destroy = drm_connector_cleanup,
-	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
-	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
-};
-
-int rcar_du_hdmi_connector_init(struct rcar_du_device *rcdu,
-				struct rcar_du_encoder *renc)
-{
-	struct drm_encoder *encoder = rcar_encoder_to_drm_encoder(renc);
-	struct rcar_du_connector *rcon;
-	struct drm_connector *connector;
-	int ret;
-
-	rcon = devm_kzalloc(rcdu->dev, sizeof(*rcon), GFP_KERNEL);
-	if (rcon == NULL)
-		return -ENOMEM;
-
-	connector = &rcon->connector;
-	connector->display_info.width_mm = 0;
-	connector->display_info.height_mm = 0;
-	connector->interlace_allowed = true;
-	connector->polled = DRM_CONNECTOR_POLL_HPD;
-
-	ret = drm_connector_init(rcdu->ddev, connector, &connector_funcs,
-				 DRM_MODE_CONNECTOR_HDMIA);
-	if (ret < 0)
-		return ret;
-
-	drm_connector_helper_add(connector, &connector_helper_funcs);
-
-	connector->dpms = DRM_MODE_DPMS_OFF;
-	drm_object_property_set_value(&connector->base,
-		rcdu->ddev->mode_config.dpms_property, DRM_MODE_DPMS_OFF);
-
-	ret = drm_mode_connector_attach_encoder(connector, encoder);
-	if (ret < 0)
-		return ret;
-
-	rcon->encoder = renc;
-
-	return 0;
-}

drivers/gpu/drm/rcar-du/rcar_du_hdmicon.h

-/*
- * R-Car Display Unit HDMI Connector
- *
- * Copyright (C) 2014 Renesas Electronics Corporation
- *
- * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef __RCAR_DU_HDMICON_H__
-#define __RCAR_DU_HDMICON_H__
-
-struct rcar_du_device;
-struct rcar_du_encoder;
-
-#if IS_ENABLED(CONFIG_DRM_RCAR_HDMI)
-int rcar_du_hdmi_connector_init(struct rcar_du_device *rcdu,
-				struct rcar_du_encoder *renc);
-#else
-static inline int rcar_du_hdmi_connector_init(struct rcar_du_device *rcdu,
-					      struct rcar_du_encoder *renc)
-{
-	return -ENOSYS;
-}
-#endif
-
-#endif /* __RCAR_DU_HDMICON_H__ */

drivers/gpu/drm/rcar-du/rcar_du_hdmienc.c

@@ -16,7 +16,6 @@
 #include <drm/drmP.h>
 #include <drm/drm_crtc.h>
 #include <drm/drm_crtc_helper.h>
-#include <drm/drm_encoder_slave.h>
 
 #include "rcar_du_drv.h"
 #include "rcar_du_encoder.h"
@@ -25,20 +24,14 @@
 
 struct rcar_du_hdmienc {
 	struct rcar_du_encoder *renc;
-	struct device *dev;
 	bool enabled;
 };
 
 #define to_rcar_hdmienc(e)	(to_rcar_encoder(e)->hdmi)
-#define to_slave_funcs(e)	(to_rcar_encoder(e)->slave.slave_funcs)
 
 static void rcar_du_hdmienc_disable(struct drm_encoder *encoder)
 {
 	struct rcar_du_hdmienc *hdmienc = to_rcar_hdmienc(encoder);
-	const struct drm_encoder_slave_funcs *sfuncs = to_slave_funcs(encoder);
-
-	if (sfuncs->dpms)
-		sfuncs->dpms(encoder, DRM_MODE_DPMS_OFF);
 
 	if (hdmienc->renc->lvds)
 		rcar_du_lvdsenc_enable(hdmienc->renc->lvds, encoder->crtc,
@@ -50,15 +43,11 @@ static void rcar_du_hdmienc_disable(struct drm_encoder *encoder)
 static void rcar_du_hdmienc_enable(struct drm_encoder *encoder)
 {
 	struct rcar_du_hdmienc *hdmienc = to_rcar_hdmienc(encoder);
-	const struct drm_encoder_slave_funcs *sfuncs = to_slave_funcs(encoder);
 
 	if (hdmienc->renc->lvds)
 		rcar_du_lvdsenc_enable(hdmienc->renc->lvds, encoder->crtc,
 				       true);
 
-	if (sfuncs->dpms)
-		sfuncs->dpms(encoder, DRM_MODE_DPMS_ON);
-
 	hdmienc->enabled = true;
 }
 
@@ -67,29 +56,21 @@ static int rcar_du_hdmienc_atomic_check(struct drm_encoder *encoder,
 					struct drm_connector_state *conn_state)
 {
 	struct rcar_du_hdmienc *hdmienc = to_rcar_hdmienc(encoder);
-	const struct drm_encoder_slave_funcs *sfuncs = to_slave_funcs(encoder);
 	struct drm_display_mode *adjusted_mode = &crtc_state->adjusted_mode;
-	const struct drm_display_mode *mode = &crtc_state->mode;
 
 	if (hdmienc->renc->lvds)
 		rcar_du_lvdsenc_atomic_check(hdmienc->renc->lvds,
 					     adjusted_mode);
 
-	if (sfuncs->mode_fixup == NULL)
-		return 0;
-
-	return sfuncs->mode_fixup(encoder, mode, adjusted_mode) ? 0 : -EINVAL;
+	return 0;
 }
 
+
 static void rcar_du_hdmienc_mode_set(struct drm_encoder *encoder,
 				     struct drm_display_mode *mode,
 				     struct drm_display_mode *adjusted_mode)
 {
 	struct rcar_du_hdmienc *hdmienc = to_rcar_hdmienc(encoder);
-	const struct drm_encoder_slave_funcs *sfuncs = to_slave_funcs(encoder);
-
-	if (sfuncs->mode_set)
-		sfuncs->mode_set(encoder, mode, adjusted_mode);
 
 	rcar_du_crtc_route_output(encoder->crtc, hdmienc->renc->output);
 }
@@ -109,7 +90,6 @@ static void rcar_du_hdmienc_cleanup(struct drm_encoder *encoder)
 		rcar_du_hdmienc_disable(encoder);
 
 	drm_encoder_cleanup(encoder);
-	put_device(hdmienc->dev);
 }
 
 static const struct drm_encoder_funcs encoder_funcs = {
@@ -120,8 +100,7 @@ int rcar_du_hdmienc_init(struct rcar_du_device *rcdu,
 			 struct rcar_du_encoder *renc, struct device_node *np)
 {
 	struct drm_encoder *encoder = rcar_encoder_to_drm_encoder(renc);
-	struct drm_i2c_encoder_driver *driver;
-	struct i2c_client *i2c_slave;
+	struct drm_bridge *bridge;
 	struct rcar_du_hdmienc *hdmienc;
 	int ret;
 
@@ -129,44 +108,29 @@ int rcar_du_hdmienc_init(struct rcar_du_device *rcdu,
 	if (hdmienc == NULL)
 		return -ENOMEM;
 
-	/* Locate the slave I2C device and driver. */
-	i2c_slave = of_find_i2c_device_by_node(np);
-	if (!i2c_slave || !i2c_get_clientdata(i2c_slave)) {
-		dev_dbg(rcdu->dev,
-			"can't get I2C slave for %s, deferring probe\n",
-			of_node_full_name(np));
+	/* Locate drm bridge from the hdmi encoder DT node */
+	bridge = of_drm_find_bridge(np);
+	if (!bridge)
 		return -EPROBE_DEFER;
-	}
-
-	hdmienc->dev = &i2c_slave->dev;
-
-	if (hdmienc->dev->driver == NULL) {
-		dev_dbg(rcdu->dev,
-			"I2C slave %s not probed yet, deferring probe\n",
-			dev_name(hdmienc->dev));
-		ret = -EPROBE_DEFER;
-		goto error;
-	}
-
-	/* Initialize the slave encoder. */
-	driver = to_drm_i2c_encoder_driver(to_i2c_driver(hdmienc->dev->driver));
-	ret = driver->encoder_init(i2c_slave, rcdu->ddev, &renc->slave);
-	if (ret < 0)
-		goto error;
 
 	ret = drm_encoder_init(rcdu->ddev, encoder, &encoder_funcs,
 			       DRM_MODE_ENCODER_TMDS, NULL);
 	if (ret < 0)
-		goto error;
+		return ret;
 
 	drm_encoder_helper_add(encoder, &encoder_helper_funcs);
 
 	renc->hdmi = hdmienc;
 	hdmienc->renc = renc;
 
-	return 0;
+	/* Link drm_bridge to encoder */
+	bridge->encoder = encoder;
+
+	ret = drm_bridge_attach(rcdu->ddev, bridge);
+	if (ret) {
+		drm_encoder_cleanup(encoder);
+		return ret;
+	}
 
-error:
-	put_device(hdmienc->dev);
-	return ret;
+	return 0;
 }