net: bcmgenet: update bcmgenet_ephy_power_up to clear CK25_DIS bit

The CK25_DIS bit controls whether a 25Mhz clock is fed to the GPHY or
not, in preparation for powering down the integrated GPHY when relevant,
make sure we clear that bit.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/broadcom/genet/bcmgenet.h

@@ -354,6 +354,7 @@ struct bcmgenet_mib_counters {
 #define EXT_GPHY_CTRL			0x1C
 #define  EXT_CFG_IDDQ_BIAS		(1 << 0)
 #define  EXT_CFG_PWR_DOWN		(1 << 1)
+#define  EXT_CK25_DIS			(1 << 4)
 #define  EXT_GPHY_RESET			(1 << 5)
 
 /* DMA rings size */

drivers/net/ethernet/broadcom/genet/bcmmii.c

@@ -178,7 +178,7 @@ static void bcmgenet_ephy_power_up(struct net_device *dev)
 		return;
 
 	reg = bcmgenet_ext_readl(priv, EXT_GPHY_CTRL);
-	reg &= ~(EXT_CFG_IDDQ_BIAS | EXT_CFG_PWR_DOWN);
+	reg &= ~(EXT_CFG_IDDQ_BIAS | EXT_CFG_PWR_DOWN | EXT_CK25_DIS);
 	reg |= EXT_GPHY_RESET;
 	bcmgenet_ext_writel(priv, reg, EXT_GPHY_CTRL);
 	mdelay(2);