Commit 0d02dbd6 authored by Bijan Mottahedeh's avatar Bijan Mottahedeh Committed by Michael S. Tsirkin

vhost/scsi: Respond to control queue operations

The vhost-scsi driver currently does not handle any control queue
operations. In particular, vhost_scsi_ctl_handle_kick, merely prints out
a debug message but does nothing else. This can cause guest VMs to hang.

As part of SCSI recovery from an error, e.g., an I/O timeout, the SCSI
midlayer attempts to abort the failed operation. The SCSI virtio driver
translates the abort to a SCSI TMF request that gets put on the control
queue (virtscsi_abort -> virtscsi_tmf). The SCSI virtio driver then
waits indefinitely for this request to be completed, but it never will
because vhost-scsi never responds to that request.

To avoid a hang, always respond to control queue operations; explicitly
reject TMF requests, and return a no-op response to event requests.
Signed-off-by: default avatarBijan Mottahedeh <bijan.mottahedeh@oracle.com>
Signed-off-by: default avatarMichael S. Tsirkin <mst@redhat.com>
parent 4542d623
......@@ -1050,9 +1050,199 @@ vhost_scsi_handle_vq(struct vhost_scsi *vs, struct vhost_virtqueue *vq)
mutex_unlock(&vq->mutex);
}
static void
vhost_scsi_send_tmf_resp(struct vhost_scsi *vs,
struct vhost_virtqueue *vq,
int head, unsigned int out)
{
struct virtio_scsi_ctrl_tmf_resp __user *resp;
struct virtio_scsi_ctrl_tmf_resp rsp;
int ret;
pr_debug("%s\n", __func__);
memset(&rsp, 0, sizeof(rsp));
rsp.response = VIRTIO_SCSI_S_FUNCTION_REJECTED;
resp = vq->iov[out].iov_base;
ret = __copy_to_user(resp, &rsp, sizeof(rsp));
if (!ret)
vhost_add_used_and_signal(&vs->dev, vq, head, 0);
else
pr_err("Faulted on virtio_scsi_ctrl_tmf_resp\n");
}
static void
vhost_scsi_send_an_resp(struct vhost_scsi *vs,
struct vhost_virtqueue *vq,
int head, unsigned int out)
{
struct virtio_scsi_ctrl_an_resp __user *resp;
struct virtio_scsi_ctrl_an_resp rsp;
int ret;
pr_debug("%s\n", __func__);
memset(&rsp, 0, sizeof(rsp)); /* event_actual = 0 */
rsp.response = VIRTIO_SCSI_S_OK;
resp = vq->iov[out].iov_base;
ret = __copy_to_user(resp, &rsp, sizeof(rsp));
if (!ret)
vhost_add_used_and_signal(&vs->dev, vq, head, 0);
else
pr_err("Faulted on virtio_scsi_ctrl_an_resp\n");
}
static void
vhost_scsi_ctl_handle_vq(struct vhost_scsi *vs, struct vhost_virtqueue *vq)
{
union {
__virtio32 type;
struct virtio_scsi_ctrl_an_req an;
struct virtio_scsi_ctrl_tmf_req tmf;
} v_req;
struct iov_iter out_iter;
unsigned int out = 0, in = 0;
int head;
size_t req_size, rsp_size, typ_size;
size_t out_size, in_size;
u8 *lunp;
void *req;
mutex_lock(&vq->mutex);
/*
* We can handle the vq only after the endpoint is setup by calling the
* VHOST_SCSI_SET_ENDPOINT ioctl.
*/
if (!vq->private_data)
goto out;
vhost_disable_notify(&vs->dev, vq);
for (;;) {
head = vhost_get_vq_desc(vq, vq->iov,
ARRAY_SIZE(vq->iov), &out, &in,
NULL, NULL);
pr_debug("vhost_get_vq_desc: head: %d, out: %u in: %u\n",
head, out, in);
/* On error, stop handling until the next kick. */
if (unlikely(head < 0))
break;
/* Nothing new? Wait for eventfd to tell us they refilled. */
if (head == vq->num) {
if (unlikely(vhost_enable_notify(&vs->dev, vq))) {
vhost_disable_notify(&vs->dev, vq);
continue;
}
break;
}
/*
* Get the size of request and response buffers.
*/
out_size = iov_length(vq->iov, out);
in_size = iov_length(&vq->iov[out], in);
/*
* Copy over the virtio-scsi request header, which for a
* ANY_LAYOUT enabled guest may span multiple iovecs, or a
* single iovec may contain both the header + outgoing
* WRITE payloads.
*
* copy_from_iter() will advance out_iter, so that it will
* point at the start of the outgoing WRITE payload, if
* DMA_TO_DEVICE is set.
*/
iov_iter_init(&out_iter, WRITE, vq->iov, out, out_size);
req = &v_req.type;
typ_size = sizeof(v_req.type);
if (unlikely(!copy_from_iter_full(req, typ_size, &out_iter))) {
vq_err(vq, "Faulted on copy_from_iter tmf type\n");
/*
* The size of the response buffer varies based on
* the request type and must be validated against it.
* Since the request type is not known, don't send
* a response.
*/
continue;
}
switch (v_req.type) {
case VIRTIO_SCSI_T_TMF:
req = &v_req.tmf;
lunp = &v_req.tmf.lun[0];
req_size = sizeof(struct virtio_scsi_ctrl_tmf_req);
rsp_size = sizeof(struct virtio_scsi_ctrl_tmf_resp);
break;
case VIRTIO_SCSI_T_AN_QUERY:
case VIRTIO_SCSI_T_AN_SUBSCRIBE:
req = &v_req.an;
lunp = &v_req.an.lun[0];
req_size = sizeof(struct virtio_scsi_ctrl_an_req);
rsp_size = sizeof(struct virtio_scsi_ctrl_an_resp);
break;
default:
vq_err(vq, "Unknown control request %d", v_req.type);
continue;
}
/*
* Check for a sane response buffer so we can report early
* errors back to the guest.
*/
if (unlikely(in_size < rsp_size)) {
vq_err(vq,
"Resp buf too small, need min %zu bytes got %zu",
rsp_size, in_size);
/*
* Notifications are disabled at this point;
* continue so they can be eventually enabled
* when processing terminates.
*/
continue;
}
if (unlikely(out_size < req_size)) {
vq_err(vq,
"Req buf too small, need min %zu bytes got %zu",
req_size, out_size);
vhost_scsi_send_bad_target(vs, vq, head, out);
continue;
}
req += typ_size;
req_size -= typ_size;
if (unlikely(!copy_from_iter_full(req, req_size, &out_iter))) {
vq_err(vq, "Faulted on copy_from_iter\n");
vhost_scsi_send_bad_target(vs, vq, head, out);
continue;
}
/* virtio-scsi spec requires byte 0 of the lun to be 1 */
if (unlikely(*lunp != 1)) {
vq_err(vq, "Illegal virtio-scsi lun: %u\n", *lunp);
vhost_scsi_send_bad_target(vs, vq, head, out);
continue;
}
if (v_req.type == VIRTIO_SCSI_T_TMF) {
pr_debug("%s tmf %d\n", __func__, v_req.tmf.subtype);
vhost_scsi_send_tmf_resp(vs, vq, head, out);
} else
vhost_scsi_send_an_resp(vs, vq, head, out);
}
out:
mutex_unlock(&vq->mutex);
}
static void vhost_scsi_ctl_handle_kick(struct vhost_work *work)
{
struct vhost_virtqueue *vq = container_of(work, struct vhost_virtqueue,
poll.work);
struct vhost_scsi *vs = container_of(vq->dev, struct vhost_scsi, dev);
pr_debug("%s: The handling func for control queue.\n", __func__);
vhost_scsi_ctl_handle_vq(vs, vq);
}
static void
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment