Commit 0d24f65e authored by Ahmed S. Darwish's avatar Ahmed S. Darwish Committed by Peter Zijlstra

Documentation: locking: Describe seqlock design and usage

Proper documentation for the design and usage of sequence counters and
sequential locks does not exist. Complete the seqlock.h documentation as
follows:

  - Divide all documentation on a seqcount_t vs. seqlock_t basis. The
    description for both mechanisms was intermingled, which is incorrect
    since the usage constrains for each type are vastly different.

  - Add an introductory paragraph describing the internal design of, and
    rationale for, sequence counters.

  - Document seqcount_t writer non-preemptibility requirement, which was
    not previously documented anywhere, and provide a clear rationale.

  - Provide template code for seqcount_t and seqlock_t initialization
    and reader/writer critical sections.

  - Recommend using seqlock_t by default. It implicitly handles the
    serialization and non-preemptibility requirements of writers.

At seqlock.h:

  - Remove references to brlocks as they've long been removed from the
    kernel.

  - Remove references to gcc-3.x since the kernel's minimum supported
    gcc version is 4.9.

References: 0f6ed63b ("no need to keep brlock macros anymore...")
References: 6ec4476a ("Raise gcc version requirement to 4.9")
Signed-off-by: default avatarAhmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: default avatarPeter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200720155530.1173732-2-a.darwish@linutronix.de
parent f05d6717
......@@ -14,6 +14,7 @@ locking
mutex-design
rt-mutex-design
rt-mutex
seqlock
spinlocks
ww-mutex-design
preempt-locking
......
======================================
Sequence counters and sequential locks
======================================
Introduction
============
Sequence counters are a reader-writer consistency mechanism with
lockless readers (read-only retry loops), and no writer starvation. They
are used for data that's rarely written to (e.g. system time), where the
reader wants a consistent set of information and is willing to retry if
that information changes.
A data set is consistent when the sequence count at the beginning of the
read side critical section is even and the same sequence count value is
read again at the end of the critical section. The data in the set must
be copied out inside the read side critical section. If the sequence
count has changed between the start and the end of the critical section,
the reader must retry.
Writers increment the sequence count at the start and the end of their
critical section. After starting the critical section the sequence count
is odd and indicates to the readers that an update is in progress. At
the end of the write side critical section the sequence count becomes
even again which lets readers make progress.
A sequence counter write side critical section must never be preempted
or interrupted by read side sections. Otherwise the reader will spin for
the entire scheduler tick due to the odd sequence count value and the
interrupted writer. If that reader belongs to a real-time scheduling
class, it can spin forever and the kernel will livelock.
This mechanism cannot be used if the protected data contains pointers,
as the writer can invalidate a pointer that the reader is following.
.. _seqcount_t:
Sequence counters (``seqcount_t``)
==================================
This is the the raw counting mechanism, which does not protect against
multiple writers. Write side critical sections must thus be serialized
by an external lock.
If the write serialization primitive is not implicitly disabling
preemption, preemption must be explicitly disabled before entering the
write side section. If the read section can be invoked from hardirq or
softirq contexts, interrupts or bottom halves must also be respectively
disabled before entering the write section.
If it's desired to automatically handle the sequence counter
requirements of writer serialization and non-preemptibility, use
:ref:`seqlock_t` instead.
Initialization::
/* dynamic */
seqcount_t foo_seqcount;
seqcount_init(&foo_seqcount);
/* static */
static seqcount_t foo_seqcount = SEQCNT_ZERO(foo_seqcount);
/* C99 struct init */
struct {
.seq = SEQCNT_ZERO(foo.seq),
} foo;
Write path::
/* Serialized context with disabled preemption */
write_seqcount_begin(&foo_seqcount);
/* ... [[write-side critical section]] ... */
write_seqcount_end(&foo_seqcount);
Read path::
do {
seq = read_seqcount_begin(&foo_seqcount);
/* ... [[read-side critical section]] ... */
} while (read_seqcount_retry(&foo_seqcount, seq));
.. _seqlock_t:
Sequential locks (``seqlock_t``)
================================
This contains the :ref:`seqcount_t` mechanism earlier discussed, plus an
embedded spinlock for writer serialization and non-preemptibility.
If the read side section can be invoked from hardirq or softirq context,
use the write side function variants which disable interrupts or bottom
halves respectively.
Initialization::
/* dynamic */
seqlock_t foo_seqlock;
seqlock_init(&foo_seqlock);
/* static */
static DEFINE_SEQLOCK(foo_seqlock);
/* C99 struct init */
struct {
.seql = __SEQLOCK_UNLOCKED(foo.seql)
} foo;
Write path::
write_seqlock(&foo_seqlock);
/* ... [[write-side critical section]] ... */
write_sequnlock(&foo_seqlock);
Read path, three categories:
1. Normal Sequence readers which never block a writer but they must
retry if a writer is in progress by detecting change in the sequence
number. Writers do not wait for a sequence reader::
do {
seq = read_seqbegin(&foo_seqlock);
/* ... [[read-side critical section]] ... */
} while (read_seqretry(&foo_seqlock, seq));
2. Locking readers which will wait if a writer or another locking reader
is in progress. A locking reader in progress will also block a writer
from entering its critical section. This read lock is
exclusive. Unlike rwlock_t, only one locking reader can acquire it::
read_seqlock_excl(&foo_seqlock);
/* ... [[read-side critical section]] ... */
read_sequnlock_excl(&foo_seqlock);
3. Conditional lockless reader (as in 1), or locking reader (as in 2),
according to a passed marker. This is used to avoid lockless readers
starvation (too much retry loops) in case of a sharp spike in write
activity. First, a lockless read is tried (even marker passed). If
that trial fails (odd sequence counter is returned, which is used as
the next iteration marker), the lockless read is transformed to a
full locking read and no retry loop is necessary::
/* marker; even initialization */
int seq = 0;
do {
read_seqbegin_or_lock(&foo_seqlock, &seq);
/* ... [[read-side critical section]] ... */
} while (need_seqretry(&foo_seqlock, seq));
done_seqretry(&foo_seqlock, seq);
API documentation
=================
.. kernel-doc:: include/linux/seqlock.h
/* SPDX-License-Identifier: GPL-2.0 */
#ifndef __LINUX_SEQLOCK_H
#define __LINUX_SEQLOCK_H
/*
* Reader/writer consistent mechanism without starving writers. This type of
* lock for data where the reader wants a consistent set of information
* and is willing to retry if the information changes. There are two types
* of readers:
* 1. Sequence readers which never block a writer but they may have to retry
* if a writer is in progress by detecting change in sequence number.
* Writers do not wait for a sequence reader.
* 2. Locking readers which will wait if a writer or another locking reader
* is in progress. A locking reader in progress will also block a writer
* from going forward. Unlike the regular rwlock, the read lock here is
* exclusive so that only one locking reader can get it.
*
* This is not as cache friendly as brlock. Also, this may not work well
* for data that contains pointers, because any writer could
* invalidate a pointer that a reader was following.
*
* Expected non-blocking reader usage:
* do {
* seq = read_seqbegin(&foo);
* ...
* } while (read_seqretry(&foo, seq));
*
*
* On non-SMP the spin locks disappear but the writer still needs
* to increment the sequence variables because an interrupt routine could
* change the state of the data.
*
* Based on x86_64 vsyscall gettimeofday
* by Keith Owens and Andrea Arcangeli
* seqcount_t / seqlock_t - a reader-writer consistency mechanism with
* lockless readers (read-only retry loops), and no writer starvation.
*
* See Documentation/locking/seqlock.rst
*
* Copyrights:
* - Based on x86_64 vsyscall gettimeofday: Keith Owens, Andrea Arcangeli
*/
#include <linux/spinlock.h>
......@@ -41,8 +20,8 @@
#include <asm/processor.h>
/*
* The seqlock interface does not prescribe a precise sequence of read
* begin/retry/end. For readers, typically there is a call to
* The seqlock seqcount_t interface does not prescribe a precise sequence of
* read begin/retry/end. For readers, typically there is a call to
* read_seqcount_begin() and read_seqcount_retry(), however, there are more
* esoteric cases which do not follow this pattern.
*
......@@ -50,16 +29,30 @@
* via seqcount_t under KCSAN: upon beginning a seq-reader critical section,
* pessimistically mark the next KCSAN_SEQLOCK_REGION_MAX memory accesses as
* atomics; if there is a matching read_seqcount_retry() call, no following
* memory operations are considered atomic. Usage of seqlocks via seqlock_t
* interface is not affected.
* memory operations are considered atomic. Usage of the seqlock_t interface
* is not affected.
*/
#define KCSAN_SEQLOCK_REGION_MAX 1000
/*
* Version using sequence counter only.
* This can be used when code has its own mutex protecting the
* updating starting before the write_seqcountbeqin() and ending
* after the write_seqcount_end().
* Sequence counters (seqcount_t)
*
* This is the raw counting mechanism, without any writer protection.
*
* Write side critical sections must be serialized and non-preemptible.
*
* If readers can be invoked from hardirq or softirq contexts,
* interrupts or bottom halves must also be respectively disabled before
* entering the write section.
*
* This mechanism can't be used if the protected data contains pointers,
* as the writer can invalidate a pointer that a reader is following.
*
* If it's desired to automatically handle the sequence counter writer
* serialization and non-preemptibility requirements, use a sequential
* lock (seqlock_t) instead.
*
* See Documentation/locking/seqlock.rst
*/
typedef struct seqcount {
unsigned sequence;
......@@ -398,10 +391,6 @@ static inline void raw_write_seqcount_latch(seqcount_t *s)
smp_wmb(); /* increment "sequence" before following stores */
}
/*
* Sequence counter only version assumes that callers are using their
* own mutexing.
*/
static inline void write_seqcount_begin_nested(seqcount_t *s, int subclass)
{
raw_write_seqcount_begin(s);
......@@ -434,15 +423,21 @@ static inline void write_seqcount_invalidate(seqcount_t *s)
kcsan_nestable_atomic_end();
}
/*
* Sequential locks (seqlock_t)
*
* Sequence counters with an embedded spinlock for writer serialization
* and non-preemptibility.
*
* For more info, see:
* - Comments on top of seqcount_t
* - Documentation/locking/seqlock.rst
*/
typedef struct {
struct seqcount seqcount;
spinlock_t lock;
} seqlock_t;
/*
* These macros triggered gcc-3.x compile-time problems. We think these are
* OK now. Be cautious.
*/
#define __SEQLOCK_UNLOCKED(lockname) \
{ \
.seqcount = SEQCNT_ZERO(lockname), \
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment