gve: Use dev_info/err instead of netif_info/err.

Update the driver to use dev_info/err instead of netif_info/err.
Reviewed-by: Yangchun Fu <yangchun@google.com>
Signed-off-by: Catherine Sullivan <csully@google.com>
Signed-off-by: David Awogbemila <awogbemila@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/google/gve/gve_adminq.c

@@ -334,8 +334,7 @@ int gve_adminq_describe_device(struct gve_priv *priv)
 
 	priv->tx_desc_cnt = be16_to_cpu(descriptor->tx_queue_entries);
 	if (priv->tx_desc_cnt * sizeof(priv->tx->desc[0]) < PAGE_SIZE) {
-		netif_err(priv, drv, priv->dev, "Tx desc count %d too low\n",
-			  priv->tx_desc_cnt);
+		dev_err(&priv->pdev->dev, "Tx desc count %d too low\n", priv->tx_desc_cnt);
 		err = -EINVAL;
 		goto free_device_descriptor;
 	}
@@ -344,8 +343,7 @@ int gve_adminq_describe_device(struct gve_priv *priv)
 	    < PAGE_SIZE ||
 	    priv->rx_desc_cnt * sizeof(priv->rx->data.data_ring[0])
 	    < PAGE_SIZE) {
-		netif_err(priv, drv, priv->dev, "Rx desc count %d too low\n",
-			  priv->rx_desc_cnt);
+		dev_err(&priv->pdev->dev, "Rx desc count %d too low\n", priv->rx_desc_cnt);
 		err = -EINVAL;
 		goto free_device_descriptor;
 	}
@@ -353,8 +351,7 @@ int gve_adminq_describe_device(struct gve_priv *priv)
 				be64_to_cpu(descriptor->max_registered_pages);
 	mtu = be16_to_cpu(descriptor->mtu);
 	if (mtu < ETH_MIN_MTU) {
-		netif_err(priv, drv, priv->dev, "MTU %d below minimum MTU\n",
-			  mtu);
+		dev_err(&priv->pdev->dev, "MTU %d below minimum MTU\n", mtu);
 		err = -EINVAL;
 		goto free_device_descriptor;
 	}
@@ -362,12 +359,12 @@ int gve_adminq_describe_device(struct gve_priv *priv)
 	priv->num_event_counters = be16_to_cpu(descriptor->counters);
 	ether_addr_copy(priv->dev->dev_addr, descriptor->mac);
 	mac = descriptor->mac;
-	netif_info(priv, drv, priv->dev, "MAC addr: %pM\n", mac);
+	dev_info(&priv->pdev->dev, "MAC addr: %pM\n", mac);
 	priv->tx_pages_per_qpl = be16_to_cpu(descriptor->tx_pages_per_qpl);
 	priv->rx_pages_per_qpl = be16_to_cpu(descriptor->rx_pages_per_qpl);
 	if (priv->rx_pages_per_qpl < priv->rx_desc_cnt) {
-		netif_err(priv, drv, priv->dev, "rx_pages_per_qpl cannot be smaller than rx_desc_cnt, setting rx_desc_cnt down to %d.\n",
-			  priv->rx_pages_per_qpl);
+		dev_err(&priv->pdev->dev, "rx_pages_per_qpl cannot be smaller than rx_desc_cnt, setting rx_desc_cnt down to %d.\n",
+			priv->rx_pages_per_qpl);
 		priv->rx_desc_cnt = priv->rx_pages_per_qpl;
 	}
 	priv->default_num_queues = be16_to_cpu(descriptor->default_num_queues);

drivers/net/ethernet/google/gve/gve_main.c

@@ -930,7 +930,7 @@ static int gve_init_priv(struct gve_priv *priv, bool skip_describe_device)
 		priv->dev->max_mtu = PAGE_SIZE;
 		err = gve_adminq_set_mtu(priv, priv->dev->mtu);
 		if (err) {
-			netif_err(priv, drv, priv->dev, "Could not set mtu");
+			dev_err(&priv->pdev->dev, "Could not set mtu");
 			goto err;
 		}
 	}
@@ -970,10 +970,10 @@ static int gve_init_priv(struct gve_priv *priv, bool skip_describe_device)
 						priv->rx_cfg.num_queues);
 	}
 
-	netif_info(priv, drv, priv->dev, "TX queues %d, RX queues %d\n",
-		   priv->tx_cfg.num_queues, priv->rx_cfg.num_queues);
-	netif_info(priv, drv, priv->dev, "Max TX queues %d, Max RX queues %d\n",
-		   priv->tx_cfg.max_queues, priv->rx_cfg.max_queues);
+	dev_info(&priv->pdev->dev, "TX queues %d, RX queues %d\n",
+		 priv->tx_cfg.num_queues, priv->rx_cfg.num_queues);
+	dev_info(&priv->pdev->dev, "Max TX queues %d, Max RX queues %d\n",
+		 priv->tx_cfg.max_queues, priv->rx_cfg.max_queues);
 
 setup_device:
 	err = gve_setup_device_resources(priv);