staging: brcm80211: fix "ERROR: Macros w/ complex values ... parenthesis"

Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/staging/brcm80211/include/bcmutils.h

@@ -226,7 +226,7 @@ extern "C" {
 #define bcm_perf_enable()
 #define bcmstats(fmt)
 #define	bcmlog(fmt, a1, a2)
-#define	bcmdumplog(buf, size)	*buf = '\0'
+#define	bcmdumplog(buf, size)	(*buf = '\0')
 #define	bcmdumplogent(buf, idx)	-1
 
 #define bcmtslog(tstamp, fmt, a1, a2)
@@ -432,7 +432,7 @@ extern "C" {
 #define ALIGN_ADDR(addr, boundary) (void *)(((uintptr)(addr) + (boundary) - 1) \
 	& ~((boundary) - 1))
 #define	ISPOWEROF2(x)		((((x)-1)&(x)) == 0)
-#define VALID_MASK(mask)	!((mask) & ((mask) + 1))
+#define VALID_MASK(mask)	(!((mask) & ((mask) + 1)))
 #ifndef OFFSETOF
 #define	OFFSETOF(type, member)	((uint)(uintptr)&((type *)0)->member)
 #endif				/* OFFSETOF */

drivers/staging/brcm80211/include/epivers.h

@@ -27,7 +27,7 @@
 
 #define EPI_BUILD_NUMBER	1
 
-#define	EPI_VERSION		5, 75, 11, 0
+#define	EPI_VERSION		{ 5, 75, 11, 0 }
 
 #ifdef BCMSDIO
 /* EPI_VERSION_NUM must match FW version */

drivers/staging/brcm80211/include/linux_osl.h

@@ -309,7 +309,7 @@ extern int osl_error(int bcmerror);
 #endif				/* !defined(CONFIG_MMC_MSM7X00A */
 #define	REG_UNMAP(va)		iounmap((va))
 
-#define	R_SM(r)			*(r)
+#define	R_SM(r)			(*(r))
 #define	W_SM(r, v)		(*(r) = (v))
 #define	BZERO_SM(r, len)	memset((r), '\0', (len))
 
@@ -329,11 +329,11 @@ extern int osl_error(int bcmerror);
 #define	PKTPUSH(skb, bytes)		skb_push((struct sk_buff*)(skb), (bytes))
 #define	PKTPULL(skb, bytes)		skb_pull((struct sk_buff*)(skb), (bytes))
 #define	PKTTAG(skb)			((void*)(((struct sk_buff*)(skb))->cb))
-#define PKTALLOCED(osh)			((osl_pubinfo_t *)(osh))->pktalloced
+#define PKTALLOCED(osh)			(((osl_pubinfo_t *)(osh))->pktalloced)
 #define PKTSETPOOL(osh, skb, x, y)	do {} while (0)
 #define PKTPOOL(osh, skb)		FALSE
 
-#define PKTUNALLOC(osh)			((osl_pubinfo_t *)(osh))->pktalloced--
+#define PKTUNALLOC(osh)			(((osl_pubinfo_t *)(osh))->pktalloced--)
 
 #define	PKTSETSKIPCT(osh, skb)
 #define	PKTCLRSKIPCT(osh, skb)

drivers/staging/brcm80211/include/proto/802.11.h

@@ -1282,7 +1282,7 @@ typedef struct ht_cap_ie ht_cap_ie_t;
 #define AMPDU_RX_FACTOR_16K	1
 #define AMPDU_RX_FACTOR_32K	2
 #define AMPDU_RX_FACTOR_64K	3
-#define AMPDU_RX_FACTOR_BASE	8*1024
+#define AMPDU_RX_FACTOR_BASE	(8*1024)
 
 #define AMPDU_DELIMITER_LEN	4
 

drivers/staging/brcm80211/include/sbchipc.h

@@ -1299,15 +1299,15 @@ typedef volatile struct {
 #define CCTRL4331_EXT_LNA		(1<<2)	/* 0 disable */
 #define CCTRL4331_SPROM_GPIO13_15       (1<<3)	/* sprom/gpio13-15 mux */
 #define CCTRL4331_EXTPA_EN		(1<<4)	/* 0 ext pa disable, 1 ext pa enabled */
-#define CCTRL4331_GPIOCLK_ON_SPROMCS	<1<<5)	/* set drive out GPIO_CLK on sprom_cs pin */
+#define CCTRL4331_GPIOCLK_ON_SPROMCS	(1<<5)	/* set drive out GPIO_CLK on sprom_cs pin */
 #define CCTRL4331_PCIE_MDIO_ON_SPROMCS	(1<<6)	/* use sprom_cs pin as PCIE mdio interface */
 #define CCTRL4331_EXTPA_ON_GPIO2_5	(1<<7)	/* aband extpa will be at gpio2/5 and sprom_dout */
 #define CCTRL4331_OVR_PIPEAUXCLKEN	(1<<8)	/* override core control on pipe_AuxClkEnable */
 #define CCTRL4331_OVR_PIPEAUXPWRDOWN	(1<<9)	/* override core control on pipe_AuxPowerDown */
-#define CCTRL4331_PCIE_AUXCLKEN		<1<<10)	/* pcie_auxclkenable */
-#define CCTRL4331_PCIE_PIPE_PLLDOWN	<1<<11)	/* pcie_pipe_pllpowerdown */
-#define CCTRL4331_BT_SHD0_ON_GPIO4	<1<<16)	/* enable bt_shd0 at gpio4 */
-#define CCTRL4331_BT_SHD1_ON_GPIO5	<1<<17)	/* enable bt_shd1 at gpio5 */
+#define CCTRL4331_PCIE_AUXCLKEN		(1<<10)	/* pcie_auxclkenable */
+#define CCTRL4331_PCIE_PIPE_PLLDOWN	(1<<11)	/* pcie_pipe_pllpowerdown */
+#define CCTRL4331_BT_SHD0_ON_GPIO4	(1<<16)	/* enable bt_shd0 at gpio4 */
+#define CCTRL4331_BT_SHD1_ON_GPIO5	(1<<17)	/* enable bt_shd1 at gpio5 */
 
 /* 4331 Chip specific ChipStatus register bits */
 #define	CST4331_XTAL_FREQ		0x00000001	/* crystal frequency 20/40Mhz */

drivers/staging/brcm80211/phy/phy_version.h

@@ -27,7 +27,7 @@
 
 #define	PHY_BUILD_NUMBER		0
 
-#define	PHY_VERSION			1, 82, 8, 0
+#define	PHY_VERSION			{ 1, 82, 8, 0 }
 
 #define	PHY_VERSION_NUM		0x01520800
 

drivers/staging/brcm80211/phy/wlc_phy_int.h

@@ -226,7 +226,7 @@ typedef enum {
 
 #define RDR_NTIERS  1
 #define RDR_TIER_SIZE 64
-#define RDR_LIST_SIZE 512/3
+#define RDR_LIST_SIZE (512/3)
 #define RDR_EPOCH_SIZE 40
 #define RDR_NANTENNAS 2
 #define RDR_NTIER_SIZE  RDR_LIST_SIZE

drivers/staging/brcm80211/sys/wl_mac80211.c

@@ -229,8 +229,8 @@ module_param_string(name, name, IFNAMSIZ, 0);
 
 #define WL_MAGIC 	0xdeadbeef
 
-#define HW_TO_WL(hw)	 hw->priv
-#define WL_TO_HW(wl)	  wl->pub->ieee_hw
+#define HW_TO_WL(hw)	 (hw->priv)
+#define WL_TO_HW(wl)	  (wl->pub->ieee_hw)
 #ifdef WLC_HIGH_ONLY
 static int wl_ops_tx_nl(struct ieee80211_hw *hw, struct sk_buff *skb);
 #else

drivers/staging/brcm80211/sys/wlc_ampdu.c

@@ -69,7 +69,7 @@
 					 * accumulate between resets.
 					 */
 
-#define TX_SEQ_TO_INDEX(seq) (seq) % AMPDU_TX_BA_MAX_WSIZE
+#define TX_SEQ_TO_INDEX(seq) ((seq) % AMPDU_TX_BA_MAX_WSIZE)
 
 /* max possible overhead per mpdu in the ampdu; 3 is for roundup if needed */
 #define AMPDU_MAX_MPDU_OVERHEAD (DOT11_FCS_LEN + DOT11_ICV_AES_LEN + AMPDU_DELIMITER_LEN + 3 \

drivers/staging/brcm80211/sys/wlc_channel.c

@@ -190,12 +190,12 @@ static const chanvec_t restricted_set_12_13_14 = {
 #define  LOCALE_CHAN_52_140_ALL  (1<<14)
 #define  LOCALE_SET_5G_HIGH4     (1<<15)	/* 184-216 */
 
-#define  LOCALE_CHAN_36_64       LOCALE_SET_5G_LOW1 | LOCALE_SET_5G_LOW2 | LOCALE_SET_5G_LOW3
-#define  LOCALE_CHAN_52_64       LOCALE_SET_5G_LOW2 | LOCALE_SET_5G_LOW3
-#define  LOCALE_CHAN_100_124	 LOCALE_SET_5G_MID1 | LOCALE_SET_5G_MID2
+#define  LOCALE_CHAN_36_64       (LOCALE_SET_5G_LOW1 | LOCALE_SET_5G_LOW2 | LOCALE_SET_5G_LOW3)
+#define  LOCALE_CHAN_52_64       (LOCALE_SET_5G_LOW2 | LOCALE_SET_5G_LOW3)
+#define  LOCALE_CHAN_100_124	 (LOCALE_SET_5G_MID1 | LOCALE_SET_5G_MID2)
 #define  LOCALE_CHAN_100_140     \
-	LOCALE_SET_5G_MID1 | LOCALE_SET_5G_MID2 | LOCALE_SET_5G_MID3 | LOCALE_SET_5G_HIGH1
-#define  LOCALE_CHAN_149_165     LOCALE_SET_5G_HIGH2 | LOCALE_SET_5G_HIGH3
+	(LOCALE_SET_5G_MID1 | LOCALE_SET_5G_MID2 | LOCALE_SET_5G_MID3 | LOCALE_SET_5G_HIGH1)
+#define  LOCALE_CHAN_149_165     (LOCALE_SET_5G_HIGH2 | LOCALE_SET_5G_HIGH3)
 #define  LOCALE_CHAN_184_216     LOCALE_SET_5G_HIGH4
 
 #define  LOCALE_CHAN_01_14	(LOCALE_CHAN_01_11 | LOCALE_CHAN_12_13 | LOCALE_CHAN_14)

drivers/staging/brcm80211/sys/wlc_mac80211.h

@@ -177,13 +177,13 @@ extern const uint8 prio2fifo[];
 #define WLC_WME_RETRY_LFB_GET(wlc, ac)      GFIELD(wlc->wme_retries[ac], EDCF_LFB)
 
 #define WLC_WME_RETRY_SHORT_SET(wlc, ac, val) \
-	wlc->wme_retries[ac] = SFIELD(wlc->wme_retries[ac], EDCF_SHORT, val)
+	(wlc->wme_retries[ac] = SFIELD(wlc->wme_retries[ac], EDCF_SHORT, val))
 #define WLC_WME_RETRY_SFB_SET(wlc, ac, val) \
-	wlc->wme_retries[ac] = SFIELD(wlc->wme_retries[ac], EDCF_SFB, val)
+	(wlc->wme_retries[ac] = SFIELD(wlc->wme_retries[ac], EDCF_SFB, val))
 #define WLC_WME_RETRY_LONG_SET(wlc, ac, val) \
-	wlc->wme_retries[ac] = SFIELD(wlc->wme_retries[ac], EDCF_LONG, val)
+	(wlc->wme_retries[ac] = SFIELD(wlc->wme_retries[ac], EDCF_LONG, val))
 #define WLC_WME_RETRY_LFB_SET(wlc, ac, val) \
-	wlc->wme_retries[ac] = SFIELD(wlc->wme_retries[ac], EDCF_LFB, val)
+	(wlc->wme_retries[ac] = SFIELD(wlc->wme_retries[ac], EDCF_LFB, val))
 
 /* PLL requests */
 #define WLC_PLLREQ_SHARED	0x1	/* pll is shared on old chips */

drivers/staging/brcm80211/sys/wlc_scb.h

@@ -185,7 +185,7 @@ struct scb {
 
 #define SCB_BSSCFG(a)           ((a)->bsscfg)
 
-#define SCB_SEQNUM(scb, prio)	(scb)->seqnum[(prio)]
+#define SCB_SEQNUM(scb, prio)	((scb)->seqnum[(prio)])
 
 #define SCB_ISMULTI(a)	ETHER_ISMULTI((a)->ea.octet)
 #define SCB_ISVALID(a, _pkttag_dbgid)	((a) && (a)->_dbgid == (_pkttag_dbgid))

drivers/staging/brcm80211/util/bcmutils.c

@@ -1191,7 +1191,7 @@ static const uint8 crc8_table[256] = {
 };
 
 #define CRC_INNER_LOOP(n, c, x) \
-	(c) = ((c) >> 8) ^ crc##n##_table[((c) ^ (x)) & 0xff]
+	((c) = ((c) >> 8) ^ crc##n##_table[((c) ^ (x)) & 0xff])
 
 uint8 BCMROMFN(hndcrc8) (uint8 *pdata,	/* pointer to array of data to process */
 			 uint nbytes,	/* number of input data bytes to process */