Merge branches 'at91', 'ixp', 'master', 'misc', 'pxa' and 'realview' into devel

* at91:
  [ARM] 4802/1: Fix typo and remove vague comment
  [ARM] 4660/3: at91: allow selecting UART for early kernel messages
  [ARM] 4739/1: at91sam9263: make gpio bank C and D irqs work

* ixp:
  [ARM] 4809/2: ixp4xx: Merge dsmg600-power.c into dsmg600-setup.c
  [ARM] 4808/2: ixp4xx: Merge nas100d-power.c into nas100d-setup.c
  [ARM] 4807/2: ixp4xx: Merge nslu2-power.c into nslu2-setup.c
  [ARM] 4806/1: ixp4xx: Ethernet support for the nslu2 and nas100d boards
  [ARM] 4805/1: ixp4xx: Use leds-gpio driver instead of IXP4XX-GPIO-LED driver
  [ARM] 4715/2: Ethernet support for IXDP425 boards
  [ARM] 4714/2: Headers for IXP4xx built-in Ethernet and WAN drivers
  [ARM] 4713/3: Adds drivers for IXP4xx QMgr and NPE features
  [ARM] 4712/2: Adds functions to read and write IXP4xx "feature" bits
  [ARM] 4774/2: ixp4xx: Register dsmg600 rtc i2c_board_info
  [ARM] 4773/2: ixp4xx: Register nas100d rtc i2c_board_info
  [ARM] 4772/2: ixp4xx: Register nslu2 rtc i2c_board_info
  [ARM] 4769/2: ixp4xx: Button updates for the dsmg600 board
  [ARM] 4768/2: ixp4xx: Button and LED updates for the nas100d board
  [ARM] 4767/2: ixp4xx: Add bitops.h include to io.h
  [ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards

* master:
  [ARM] 4810/1: - Fix 'section mismatch' building warnings
  [ARM] xtime_seqlock: fix more ARM machines for xtime deadlocking
  [ARM] 21285 serial: fix build error

* misc:
  [ARM] 4736/1: Export atags to userspace and allow kexec to use customised atags

* pxa:
  [ARM] 4798/1: pcm027: fix missing header file
  [ARM] 4803/1: pxa: fix building issue of poodle.c caused by patch 4737/1
  [ARM] 4801/1: pxa: fix building issues of missing pxa2xx-regs.h
  [ARM] pxa: introduce sysdev for pxa3xx static memory controller
  [ARM] pxa: add preliminary suspend/resume code for pxa3xx
  [ARM] pxa: introduce sysdev for GPIO register saving/restoring
  [ARM] pxa: introduce sysdev for IRQ register saving/restoring
  [ARM] pxa: fix the warning of undeclared "struct pxaohci_platform_data"
  [ARM] pxa: change set_kset_name() to direct name assignment for MFP sysclass

* realview:
  [ARM] 4822/1: RealView: Change the REALVIEW_MPCORE configuration option
  [ARM] 4821/1: RealView: Remove the platform dependencies from localtimer.c
  [ARM] 4820/1: RealView: Select the timer IRQ at run-time
  [ARM] 4819/1: RealView: Fix entry-macro.S to work with multiple platforms
  [ARM] 4818/1: RealView: Add core-tile detection
  [ARM] 4817/1: RealView: Move the AMBA resource definitions to realview_eb.c
  [ARM] 4816/1: RealView: Move the platform-specific definitions into board-eb.h
  [ARM] 4815/1: RealView: Add clockevents suport for the local timers
  [ARM] 4814/1: RealView: Add broadcasting clockevents support for ARM11MPCore
  [ARM] 4813/1: Add SMP helper functions for clockevents support
  [ARM] 4812/1: RealView: clockevents support for the RealView platforms
  [ARM] 4811/1: RealView: clocksource support for the RealView platforms

arch/arm/Kconfig

@@ -33,6 +33,11 @@ config GENERIC_CLOCKEVENTS
 	bool
 	default n
 
+config GENERIC_CLOCKEVENTS_BROADCAST
+	bool
+	depends on GENERIC_CLOCKEVENTS
+	default y if SMP && !LOCAL_TIMERS
+
 config MMU
 	bool
 	default y
@@ -168,6 +173,8 @@ config ARCH_REALVIEW
 	bool "ARM Ltd. RealView family"
 	select ARM_AMBA
 	select ICST307
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
 	help
 	  This enables support for ARM Ltd RealView boards.
 
@@ -604,7 +611,7 @@ source "kernel/time/Kconfig"
 
 config SMP
 	bool "Symmetric Multi-Processing (EXPERIMENTAL)"
-	depends on EXPERIMENTAL && REALVIEW_MPCORE
+	depends on EXPERIMENTAL && REALVIEW_EB_ARM11MP
 	help
 	  This enables support for systems with more than one CPU. If you have
 	  a system with only one CPU, like most personal computers, say N. If
@@ -638,7 +645,7 @@ config HOTPLUG_CPU
 
 config LOCAL_TIMERS
 	bool "Use local timer interrupts"
-	depends on SMP && REALVIEW_MPCORE
+	depends on SMP && REALVIEW_EB_ARM11MP
 	default y
 	help
 	  Enable support for local timers on SMP platforms, rather then the
@@ -894,6 +901,13 @@ config KEXEC
 	  initially work for you.  It may help to enable device hotplugging
 	  support.
 
+config ATAGS_PROC
+	bool "Export atags in procfs"
+	default n
+	help
+	  Should the atags used to boot the kernel be exported in an "atags"
+	  file in procfs. Useful with kexec.
+
 endmenu
 
 if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_IMX || ARCH_PXA)

arch/arm/common/time-acorn.c

@@ -69,9 +69,7 @@ void __init ioctime_init(void)
 static irqreturn_t
 ioc_timer_interrupt(int irq, void *dev_id)
 {
-	write_seqlock(&xtime_lock);
 	timer_tick();
-	write_sequnlock(&xtime_lock);
 	return IRQ_HANDLED;
 }
 

arch/arm/kernel/Makefile

@@ -20,6 +20,7 @@ obj-$(CONFIG_PCI)		+= bios32.o isa.o
 obj-$(CONFIG_SMP)		+= smp.o
 obj-$(CONFIG_KEXEC)		+= machine_kexec.o relocate_kernel.o
 obj-$(CONFIG_KPROBES)		+= kprobes.o kprobes-decode.o
+obj-$(CONFIG_ATAGS_PROC)	+= atags.o
 obj-$(CONFIG_OABI_COMPAT)	+= sys_oabi-compat.o
 
 obj-$(CONFIG_CRUNCH)		+= crunch.o crunch-bits.o

arch/arm/kernel/atags.c

+#include <linux/slab.h>
+#include <linux/kexec.h>
+#include <linux/proc_fs.h>
+#include <asm/setup.h>
+#include <asm/types.h>
+#include <asm/page.h>
+
+struct buffer {
+	size_t size;
+	char *data;
+};
+static struct buffer tags_buffer;
+
+static int
+read_buffer(char* page, char** start, off_t off, int count,
+	int* eof, void* data)
+{
+	struct buffer *buffer = (struct buffer *)data;
+
+	if (off >= buffer->size) {
+		*eof = 1;
+		return 0;
+	}
+
+	count = min((int) (buffer->size - off), count);
+
+	memcpy(page, &buffer->data[off], count);
+
+	return count;
+}
+
+
+static int
+create_proc_entries(void)
+{
+	struct proc_dir_entry* tags_entry;
+
+	tags_entry = create_proc_read_entry("atags", 0400, &proc_root, read_buffer, &tags_buffer);
+	if (!tags_entry)
+		return -ENOMEM;
+
+	return 0;
+}
+
+
+static char __initdata atags_copy_buf[KEXEC_BOOT_PARAMS_SIZE];
+static char __initdata *atags_copy;
+
+void __init save_atags(const struct tag *tags)
+{
+	atags_copy = atags_copy_buf;
+	memcpy(atags_copy, tags, KEXEC_BOOT_PARAMS_SIZE);
+}
+
+
+static int __init init_atags_procfs(void)
+{
+	struct tag *tag;
+	int error;
+
+	if (!atags_copy) {
+		printk(KERN_WARNING "Exporting ATAGs: No saved tags found\n");
+		return -EIO;
+	}
+
+	for (tag = (struct tag *) atags_copy; tag->hdr.size; tag = tag_next(tag))
+		;
+
+	tags_buffer.size = ((char *) tag - atags_copy) + sizeof(tag->hdr);
+	tags_buffer.data = kmalloc(tags_buffer.size, GFP_KERNEL);
+	if (tags_buffer.data == NULL)
+		return -ENOMEM;
+	memcpy(tags_buffer.data, atags_copy, tags_buffer.size);
+
+	error = create_proc_entries();
+	if (error) {
+		printk(KERN_ERR "Exporting ATAGs: not enough memory\n");
+		kfree(tags_buffer.data);
+		tags_buffer.size = 0;
+		tags_buffer.data = NULL;
+	}
+
+	return error;
+}
+
+arch_initcall(init_atags_procfs);

arch/arm/kernel/atags.h

+#ifdef CONFIG_ATAGS_PROC
+extern void save_atags(struct tag *tags);
+#else
+static inline void save_atags(struct tag *tags) { }
+#endif

arch/arm/kernel/machine_kexec.c

@@ -21,6 +21,7 @@ extern void setup_mm_for_reboot(char mode);
 extern unsigned long kexec_start_address;
 extern unsigned long kexec_indirection_page;
 extern unsigned long kexec_mach_type;
+extern unsigned long kexec_boot_atags;
 
 /*
  * Provide a dummy crash_notes definition while crash dump arrives to arm.
@@ -62,6 +63,7 @@ void machine_kexec(struct kimage *image)
 	kexec_start_address = image->start;
 	kexec_indirection_page = page_list;
 	kexec_mach_type = machine_arch_type;
+	kexec_boot_atags = image->start - KEXEC_ARM_ZIMAGE_OFFSET + KEXEC_ARM_ATAGS_OFFSET;
 
 	/* copy our kernel relocation code to the control code page */
 	memcpy(reboot_code_buffer,

arch/arm/kernel/relocate_kernel.S

@@ -7,23 +7,6 @@
 	.globl relocate_new_kernel
 relocate_new_kernel:
 
-	/* Move boot params back to where the kernel expects them */
-
-	ldr	r0,kexec_boot_params_address
-	teq	r0,#0
-	beq	8f
-
-	ldr	r1,kexec_boot_params_copy
-	mov	r6,#KEXEC_BOOT_PARAMS_SIZE/4
-7:
-	ldr	r5,[r1],#4
-	str	r5,[r0],#4
-	subs	r6,r6,#1
-	bne	7b
-
-8:
-	/* Boot params moved, now go on with the kernel */
-
 	ldr	r0,kexec_indirection_page
 	ldr	r1,kexec_start_address
 
@@ -67,7 +50,7 @@ relocate_new_kernel:
 	mov lr,r1
 	mov r0,#0
 	ldr r1,kexec_mach_type
-	ldr r2,kexec_boot_params_address
+	ldr r2,kexec_boot_atags
 	mov pc,lr
 
 	.globl kexec_start_address
@@ -82,14 +65,9 @@ kexec_indirection_page:
 kexec_mach_type:
 	.long	0x0
 
-	/* phy addr where new kernel will expect to find boot params */
-	.globl kexec_boot_params_address
-kexec_boot_params_address:
-	.long	0x0
-
-	/* phy addr where old kernel put a copy of orig boot params */
-	.globl kexec_boot_params_copy
-kexec_boot_params_copy:
+	/* phy addr of the atags for the new kernel */
+	.globl kexec_boot_atags
+kexec_boot_atags:
 	.long	0x0
 
 relocate_new_kernel_end:

arch/arm/kernel/setup.c

@@ -24,7 +24,6 @@
 #include <linux/interrupt.h>
 #include <linux/smp.h>
 #include <linux/fs.h>
-#include <linux/kexec.h>
 
 #include <asm/cpu.h>
 #include <asm/elf.h>
@@ -39,6 +38,7 @@
 #include <asm/mach/time.h>
 
 #include "compat.h"
+#include "atags.h"
 
 #ifndef MEM_SIZE
 #define MEM_SIZE	(16*1024*1024)
@@ -62,6 +62,7 @@ extern int root_mountflags;
 extern void _stext, _text, _etext, __data_start, _edata, _end;
 
 unsigned int processor_id;
+EXPORT_SYMBOL(processor_id);
 unsigned int __machine_arch_type;
 EXPORT_SYMBOL(__machine_arch_type);
 
@@ -784,23 +785,6 @@ static int __init customize_machine(void)
 }
 arch_initcall(customize_machine);
 
-#ifdef CONFIG_KEXEC
-
-/* Physical addr of where the boot params should be for this machine */
-extern unsigned long kexec_boot_params_address;
-
-/* Physical addr of the buffer into which the boot params are copied */
-extern unsigned long kexec_boot_params_copy;
-
-/* Pointer to the boot params buffer, for manipulation and display */
-unsigned long kexec_boot_params;
-EXPORT_SYMBOL(kexec_boot_params);
-
-/* The buffer itself - make sure it is sized correctly */
-static unsigned long kexec_boot_params_buf[(KEXEC_BOOT_PARAMS_SIZE + 3) / 4];
-
-#endif
-
 void __init setup_arch(char **cmdline_p)
 {
 	struct tag *tags = (struct tag *)&init_tags;
@@ -819,18 +803,6 @@ void __init setup_arch(char **cmdline_p)
 	else if (mdesc->boot_params)
 		tags = phys_to_virt(mdesc->boot_params);
 
-#ifdef CONFIG_KEXEC
-	kexec_boot_params_copy = virt_to_phys(kexec_boot_params_buf);
-	kexec_boot_params = (unsigned long)kexec_boot_params_buf;
-	if (__atags_pointer) {
-		kexec_boot_params_address = __atags_pointer;
-		memcpy((void *)kexec_boot_params, tags, KEXEC_BOOT_PARAMS_SIZE);
-	} else if (mdesc->boot_params) {
-		kexec_boot_params_address = mdesc->boot_params;
-		memcpy((void *)kexec_boot_params, tags, KEXEC_BOOT_PARAMS_SIZE);
-	}
-#endif
-
 	/*
 	 * If we have the old style parameters, convert them to
 	 * a tag list.
@@ -846,6 +818,7 @@ void __init setup_arch(char **cmdline_p)
 	if (tags->hdr.tag == ATAG_CORE) {
 		if (meminfo.nr_banks != 0)
 			squash_mem_tags(tags);
+		save_atags(tags);
 		parse_tags(tags);
 	}
 

arch/arm/kernel/smp.c

@@ -290,6 +290,11 @@ asmlinkage void __cpuinit secondary_start_kernel(void)
 	local_irq_enable();
 	local_fiq_enable();
 
+	/*
+	 * Setup local timer for this CPU.
+	 */
+	local_timer_setup(cpu);
+
 	calibrate_delay();
 
 	smp_store_cpu_info(cpu);
@@ -299,11 +304,6 @@ asmlinkage void __cpuinit secondary_start_kernel(void)
 	 */
 	cpu_set(cpu, cpu_online_map);
 
-	/*
-	 * Setup local timer for this CPU.
-	 */
-	local_timer_setup(cpu);
-
 	/*
 	 * OK, it's off to the idle thread for us
 	 */
@@ -454,6 +454,27 @@ int smp_call_function(void (*func)(void *info), void *info, int retry,
 }
 EXPORT_SYMBOL_GPL(smp_call_function);
 
+int smp_call_function_single(int cpu, void (*func)(void *info), void *info,
+			     int retry, int wait)
+{
+	/* prevent preemption and reschedule on another processor */
+	int current_cpu = get_cpu();
+	int ret = 0;
+
+	if (cpu == current_cpu) {
+		local_irq_disable();
+		func(info);
+		local_irq_enable();
+	} else
+		ret = smp_call_function_on_cpu(func, info, retry, wait,
+					       cpumask_of_cpu(cpu));
+
+	put_cpu();
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(smp_call_function_single);
+
 void show_ipi_list(struct seq_file *p)
 {
 	unsigned int cpu;
@@ -481,8 +502,7 @@ void show_local_irqs(struct seq_file *p)
 static void ipi_timer(void)
 {
 	irq_enter();
-	profile_tick(CPU_PROFILING);
-	update_process_times(user_mode(get_irq_regs()));
+	local_timer_interrupt();
 	irq_exit();
 }
 
@@ -621,6 +641,11 @@ void smp_send_timer(void)
 	send_ipi_message(mask, IPI_TIMER);
 }
 
+void smp_timer_broadcast(cpumask_t mask)
+{
+	send_ipi_message(mask, IPI_TIMER);
+}
+
 void smp_send_stop(void)
 {
 	cpumask_t mask = cpu_online_map;

arch/arm/mach-at91/at91sam926x_time.c

@@ -49,8 +49,6 @@ static irqreturn_t at91sam926x_timer_interrupt(int irq, void *dev_id)
 	volatile long nr_ticks;
 
 	if (at91_sys_read(AT91_PIT_SR) & AT91_PIT_PITS) {	/* This is a shared interrupt */
-		write_seqlock(&xtime_lock);
-
 		/* Get number to ticks performed before interrupt and clear PIT interrupt */
 		nr_ticks = PIT_PICNT(at91_sys_read(AT91_PIT_PIVR));
 		do {
@@ -58,7 +56,6 @@ static irqreturn_t at91sam926x_timer_interrupt(int irq, void *dev_id)
 			nr_ticks--;
 		} while (nr_ticks);
 
-		write_sequnlock(&xtime_lock);
 		return IRQ_HANDLED;
 	} else
 		return IRQ_NONE;		/* not handled */

arch/arm/mach-ixp4xx/Kconfig

@@ -189,6 +189,20 @@ config IXP4XX_INDIRECT_PCI
 	  need to use the indirect method instead. If you don't know
 	  what you need, leave this option unselected.
 
+config IXP4XX_QMGR
+	tristate "IXP4xx Queue Manager support"
+	help
+	  This driver supports IXP4xx built-in hardware queue manager
+	  and is automatically selected by Ethernet and HSS drivers.
+
+config IXP4XX_NPE
+	tristate "IXP4xx Network Processor Engine support"
+	select HOTPLUG
+	select FW_LOADER
+	help
+	  This driver supports IXP4xx built-in network coprocessors
+	  and is automatically selected by Ethernet and HSS drivers.
+
 endmenu
 
 endif

arch/arm/mach-ixp4xx/Makefile

@@ -23,10 +23,12 @@ obj-$(CONFIG_MACH_AVILA)	+= avila-setup.o
 obj-$(CONFIG_MACH_IXDPG425)	+= coyote-setup.o
 obj-$(CONFIG_ARCH_ADI_COYOTE)	+= coyote-setup.o
 obj-$(CONFIG_MACH_GTWX5715)	+= gtwx5715-setup.o
-obj-$(CONFIG_MACH_NSLU2)	+= nslu2-setup.o nslu2-power.o
-obj-$(CONFIG_MACH_NAS100D)	+= nas100d-setup.o nas100d-power.o
-obj-$(CONFIG_MACH_DSMG600)      += dsmg600-setup.o dsmg600-power.o
+obj-$(CONFIG_MACH_NSLU2)	+= nslu2-setup.o
+obj-$(CONFIG_MACH_NAS100D)	+= nas100d-setup.o
+obj-$(CONFIG_MACH_DSMG600)      += dsmg600-setup.o
 obj-$(CONFIG_MACH_GATEWAY7001)	+= gateway7001-setup.o
 obj-$(CONFIG_MACH_WG302V2)	+= wg302v2-setup.o
 
 obj-$(CONFIG_PCI)		+= $(obj-pci-$(CONFIG_PCI)) common-pci.o
+obj-$(CONFIG_IXP4XX_QMGR)	+= ixp4xx_qmgr.o
+obj-$(CONFIG_IXP4XX_NPE)	+= ixp4xx_npe.o

arch/arm/mach-ixp4xx/dsmg600-power.c

-/*
- * arch/arm/mach-ixp4xx/dsmg600-power.c
- *
- * DSM-G600 Power/Reset driver
- * Author: Michael Westerhof <mwester@dls.net>
- *
- * Based on nslu2-power.c
- *  Copyright (C) 2005 Tower Technologies
- *  Author: Alessandro Zummo <a.zummo@towertech.it>
- *
- * which was based on nslu2-io.c
- *  Copyright (C) 2004 Karen Spearel
- *
- * Maintainers: http://www.nslu2-linux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/module.h>
-#include <linux/reboot.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/jiffies.h>
-#include <linux/timer.h>
-
-#include <asm/mach-types.h>
-
-extern void ctrl_alt_del(void);
-
-/* This is used to make sure the power-button pusher is serious.  The button
- * must be held until the value of this counter reaches zero.
- */
-static volatile int power_button_countdown;
-
-/* Must hold the button down for at least this many counts to be processed */
-#define PBUTTON_HOLDDOWN_COUNT 4 /* 2 secs */
-
-static void dsmg600_power_handler(unsigned long data);
-static DEFINE_TIMER(dsmg600_power_timer, dsmg600_power_handler, 0, 0);
-
-static void dsmg600_power_handler(unsigned long data)
-{
-	/* This routine is called twice per second to check the
-	 * state of the power button.
-	 */
-
-	if (*IXP4XX_GPIO_GPINR & DSMG600_PB_BM) {
-
-		/* IO Pin is 1 (button pushed) */
-		if (power_button_countdown == 0) {
-			/* Signal init to do the ctrlaltdel action, this will bypass
-			 * init if it hasn't started and do a kernel_restart.
-			 */
-			ctrl_alt_del();
-
-			/* Change the state of the power LED to "blink" */
-			gpio_line_set(DSMG600_LED_PWR_GPIO, IXP4XX_GPIO_LOW);
-		}
-		power_button_countdown--;
-
-	} else {
-		power_button_countdown = PBUTTON_HOLDDOWN_COUNT;
-	}
-
-	mod_timer(&dsmg600_power_timer, jiffies + msecs_to_jiffies(500));
-}
-
-static irqreturn_t dsmg600_reset_handler(int irq, void *dev_id)
-{
-	/* This is the paper-clip reset, it shuts the machine down directly. */
-	machine_power_off();
-
-	return IRQ_HANDLED;
-}
-
-static int __init dsmg600_power_init(void)
-{
-	if (!(machine_is_dsmg600()))
-		return 0;
-
-	if (request_irq(DSMG600_RB_IRQ, &dsmg600_reset_handler,
-		IRQF_DISABLED | IRQF_TRIGGER_LOW, "DSM-G600 reset button",
-		NULL) < 0) {
-
-		printk(KERN_DEBUG "Reset Button IRQ %d not available\n",
-			DSMG600_RB_IRQ);
-
-		return -EIO;
-	}
-
-	/* The power button on the D-Link DSM-G600 is on GPIO 15, but
-	 * it cannot handle interrupts on that GPIO line.  So we'll
-	 * have to poll it with a kernel timer.
-	 */
-
-	/* Make sure that the power button GPIO is set up as an input */
-	gpio_line_config(DSMG600_PB_GPIO, IXP4XX_GPIO_IN);
-
-	/* Set the initial value for the power button IRQ handler */
-	power_button_countdown = PBUTTON_HOLDDOWN_COUNT;
-
-	mod_timer(&dsmg600_power_timer, jiffies + msecs_to_jiffies(500));
-
-	return 0;
-}
-
-static void __exit dsmg600_power_exit(void)
-{
-	if (!(machine_is_dsmg600()))
-		return;
-
-	del_timer_sync(&dsmg600_power_timer);
-
-	free_irq(DSMG600_RB_IRQ, NULL);
-}
-
-module_init(dsmg600_power_init);
-module_exit(dsmg600_power_exit);
-
-MODULE_AUTHOR("Michael Westerhof <mwester@dls.net>");
-MODULE_DESCRIPTION("DSM-G600 Power/Reset driver");
-MODULE_LICENSE("GPL");

arch/arm/mach-ixp4xx/dsmg600-setup.c

 /*
  * DSM-G600 board-setup
  *
+ * Copyright (C) 2008 Rod Whitby <rod@whitby.id.au>
  * Copyright (C) 2006 Tower Technologies
- * Author: Alessandro Zummo <a.zummo@towertech.it>
  *
- * based ixdp425-setup.c:
+ * based on ixdp425-setup.c:
  *      Copyright (C) 2003-2004 MontaVista Software, Inc.
+ * based on nslu2-power.c:
+ *	Copyright (C) 2005 Tower Technologies
+ * based on nslu2-io.c:
+ *	Copyright (C) 2004 Karen Spearel
  *
  * Author: Alessandro Zummo <a.zummo@towertech.it>
+ * Author: Michael Westerhof <mwester@dls.net>
+ * Author: Rod Whitby <rod@whitby.id.au>
  * Maintainers: http://www.nslu2-linux.org/
  */
 
-#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/jiffies.h>
+#include <linux/timer.h>
 #include <linux/serial.h>
 #include <linux/serial_8250.h>
+#include <linux/leds.h>
+#include <linux/reboot.h>
+#include <linux/i2c.h>
 #include <linux/i2c-gpio.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 #include <asm/mach/time.h>
+#include <asm/gpio.h>
 
 static struct flash_platform_data dsmg600_flash_data = {
 	.map_name		= "cfi_probe",
@@ -51,29 +63,34 @@ static struct platform_device dsmg600_i2c_gpio = {
 	},
 };
 
-#ifdef CONFIG_LEDS_CLASS
-static struct resource dsmg600_led_resources[] = {
+static struct i2c_board_info __initdata dsmg600_i2c_board_info [] = {
+	{
+		I2C_BOARD_INFO("rtc-pcf8563", 0x51),
+	},
+};
+
+static struct gpio_led dsmg600_led_pins[] = {
 	{
 		.name		= "power",
-		.start          = DSMG600_LED_PWR_GPIO,
-		.end            = DSMG600_LED_PWR_GPIO,
-		.flags          = IXP4XX_GPIO_HIGH,
+		.gpio		= DSMG600_LED_PWR_GPIO,
 	},
 	{
 		.name		= "wlan",
-		.start		= DSMG600_LED_WLAN_GPIO,
-		.end            = DSMG600_LED_WLAN_GPIO,
-		.flags          = IXP4XX_GPIO_LOW,
+		.gpio		= DSMG600_LED_WLAN_GPIO,
+		.active_low	= true,
 	},
 };
 
+static struct gpio_led_platform_data dsmg600_led_data = {
+	.num_leds		= ARRAY_SIZE(dsmg600_led_pins),
+	.leds			= dsmg600_led_pins,
+};
+
 static struct platform_device dsmg600_leds = {
-        .name                   = "IXP4XX-GPIO-LED",
+	.name			= "leds-gpio",
 	.id			= -1,
-        .num_resources          = ARRAY_SIZE(dsmg600_led_resources),
-        .resource               = dsmg600_led_resources,
+	.dev.platform_data	= &dsmg600_led_data,
 };
-#endif
 
 static struct resource dsmg600_uart_resources[] = {
 	{
@@ -121,6 +138,7 @@ static struct platform_device dsmg600_uart = {
 static struct platform_device *dsmg600_devices[] __initdata = {
 	&dsmg600_i2c_gpio,
 	&dsmg600_flash,
+	&dsmg600_leds,
 };
 
 static void dsmg600_power_off(void)
@@ -132,6 +150,57 @@ static void dsmg600_power_off(void)
 	gpio_line_set(DSMG600_PO_GPIO, IXP4XX_GPIO_HIGH);
 }
 
+/* This is used to make sure the power-button pusher is serious.  The button
+ * must be held until the value of this counter reaches zero.
+ */
+static int power_button_countdown;
+
+/* Must hold the button down for at least this many counts to be processed */
+#define PBUTTON_HOLDDOWN_COUNT 4 /* 2 secs */
+
+static void dsmg600_power_handler(unsigned long data);
+static DEFINE_TIMER(dsmg600_power_timer, dsmg600_power_handler, 0, 0);
+
+static void dsmg600_power_handler(unsigned long data)
+{
+	/* This routine is called twice per second to check the
+	 * state of the power button.
+	 */
+
+	if (gpio_get_value(DSMG600_PB_GPIO)) {
+
+		/* IO Pin is 1 (button pushed) */
+		if (power_button_countdown > 0)
+			power_button_countdown--;
+
+	} else {
+
+		/* Done on button release, to allow for auto-power-on mods. */
+		if (power_button_countdown == 0) {
+			/* Signal init to do the ctrlaltdel action,
+			 * this will bypass init if it hasn't started
+			 * and do a kernel_restart.
+			 */
+			ctrl_alt_del();
+
+			/* Change the state of the power LED to "blink" */
+			gpio_line_set(DSMG600_LED_PWR_GPIO, IXP4XX_GPIO_LOW);
+		} else {
+			power_button_countdown = PBUTTON_HOLDDOWN_COUNT;
+		}
+	}
+
+	mod_timer(&dsmg600_power_timer, jiffies + msecs_to_jiffies(500));
+}
+
+static irqreturn_t dsmg600_reset_handler(int irq, void *dev_id)
+{
+	/* This is the paper-clip reset, it shuts the machine down directly. */
+	machine_power_off();
+
+	return IRQ_HANDLED;
+}
+
 static void __init dsmg600_timer_init(void)
 {
     /* The xtal on this machine is non-standard. */
@@ -156,7 +225,8 @@ static void __init dsmg600_init(void)
 	dsmg600_flash_resource.end =
 		IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
 
-	pm_power_off = dsmg600_power_off;
+	i2c_register_board_info(0, dsmg600_i2c_board_info,
+				ARRAY_SIZE(dsmg600_i2c_board_info));
 
 	/* The UART is required on the DSM-G600 (Redboot cannot use the
 	 * NIC) -- do it here so that it does *not* get removed if
@@ -166,10 +236,28 @@ static void __init dsmg600_init(void)
 
 	platform_add_devices(dsmg600_devices, ARRAY_SIZE(dsmg600_devices));
 
-#ifdef CONFIG_LEDS_CLASS
-        /* We don't care whether or not this works. */
-        (void)platform_device_register(&dsmg600_leds);
-#endif
+	pm_power_off = dsmg600_power_off;
+
+	if (request_irq(gpio_to_irq(DSMG600_RB_GPIO), &dsmg600_reset_handler,
+		IRQF_DISABLED | IRQF_TRIGGER_LOW,
+		"DSM-G600 reset button", NULL) < 0) {
+
+		printk(KERN_DEBUG "Reset Button IRQ %d not available\n",
+			gpio_to_irq(DSMG600_RB_GPIO));
+	}
+
+	/* The power button on the D-Link DSM-G600 is on GPIO 15, but
+	 * it cannot handle interrupts on that GPIO line.  So we'll
+	 * have to poll it with a kernel timer.
+	 */
+
+	/* Make sure that the power button GPIO is set up as an input */
+	gpio_line_config(DSMG600_PB_GPIO, IXP4XX_GPIO_IN);
+
+	/* Set the initial value for the power button IRQ handler */
+	power_button_countdown = PBUTTON_HOLDDOWN_COUNT;
+
+	mod_timer(&dsmg600_power_timer, jiffies + msecs_to_jiffies(500));
 }
 
 MACHINE_START(DSMG600, "D-Link DSM-G600 RevA")

arch/arm/mach-ixp4xx/ixdp425-setup.c

@@ -177,6 +177,31 @@ static struct platform_device ixdp425_uart = {
 	.resource		= ixdp425_uart_resources
 };
 
+/* Built-in 10/100 Ethernet MAC interfaces */
+static struct eth_plat_info ixdp425_plat_eth[] = {
+	{
+		.phy		= 0,
+		.rxq		= 3,
+		.txreadyq	= 20,
+	}, {
+		.phy		= 1,
+		.rxq		= 4,
+		.txreadyq	= 21,
+	}
+};
+
+static struct platform_device ixdp425_eth[] = {
+	{
+		.name			= "ixp4xx_eth",
+		.id			= IXP4XX_ETH_NPEB,
+		.dev.platform_data	= ixdp425_plat_eth,
+	}, {
+		.name			= "ixp4xx_eth",
+		.id			= IXP4XX_ETH_NPEC,
+		.dev.platform_data	= ixdp425_plat_eth + 1,
+	}
+};
+
 static struct platform_device *ixdp425_devices[] __initdata = {
 	&ixdp425_i2c_gpio,
 	&ixdp425_flash,
@@ -184,7 +209,9 @@ static struct platform_device *ixdp425_devices[] __initdata = {
     defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
 	&ixdp425_flash_nand,
 #endif
-	&ixdp425_uart
+	&ixdp425_uart,
+	&ixdp425_eth[0],
+	&ixdp425_eth[1],
 };
 
 static void __init ixdp425_init(void)

arch/arm/mach-ixp4xx/ixp4xx_qmgr.c

+/*
+ * Intel IXP4xx Queue Manager driver for Linux
+ *
+ * Copyright (C) 2007 Krzysztof Halasa <khc@pm.waw.pl>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License
+ * as published by the Free Software Foundation.
+ */
+
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <asm/arch/qmgr.h>
+
+#define DEBUG		0
+
+struct qmgr_regs __iomem *qmgr_regs;
+static struct resource *mem_res;
+static spinlock_t qmgr_lock;
+static u32 used_sram_bitmap[4]; /* 128 16-dword pages */
+static void (*irq_handlers[HALF_QUEUES])(void *pdev);
+static void *irq_pdevs[HALF_QUEUES];
+
+void qmgr_set_irq(unsigned int queue, int src,
+		  void (*handler)(void *pdev), void *pdev)
+{
+	u32 __iomem *reg = &qmgr_regs->irqsrc[queue / 8]; /* 8 queues / u32 */
+	int bit = (queue % 8) * 4; /* 3 bits + 1 reserved bit per queue */
+	unsigned long flags;
+
+	src &= 7;
+	spin_lock_irqsave(&qmgr_lock, flags);
+	__raw_writel((__raw_readl(reg) & ~(7 << bit)) | (src << bit), reg);
+	irq_handlers[queue] = handler;
+	irq_pdevs[queue] = pdev;
+	spin_unlock_irqrestore(&qmgr_lock, flags);
+}
+
+
+static irqreturn_t qmgr_irq1(int irq, void *pdev)
+{
+	int i;
+	u32 val = __raw_readl(&qmgr_regs->irqstat[0]);
+	__raw_writel(val, &qmgr_regs->irqstat[0]); /* ACK */
+
+	for (i = 0; i < HALF_QUEUES; i++)
+		if (val & (1 << i))
+			irq_handlers[i](irq_pdevs[i]);
+
+	return val ? IRQ_HANDLED : 0;
+}
+
+
+void qmgr_enable_irq(unsigned int queue)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&qmgr_lock, flags);
+	__raw_writel(__raw_readl(&qmgr_regs->irqen[0]) | (1 << queue),
+		     &qmgr_regs->irqen[0]);
+	spin_unlock_irqrestore(&qmgr_lock, flags);
+}
+
+void qmgr_disable_irq(unsigned int queue)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&qmgr_lock, flags);
+	__raw_writel(__raw_readl(&qmgr_regs->irqen[0]) & ~(1 << queue),
+		     &qmgr_regs->irqen[0]);
+	spin_unlock_irqrestore(&qmgr_lock, flags);
+}
+
+static inline void shift_mask(u32 *mask)
+{
+	mask[3] = mask[3] << 1 | mask[2] >> 31;
+	mask[2] = mask[2] << 1 | mask[1] >> 31;
+	mask[1] = mask[1] << 1 | mask[0] >> 31;
+	mask[0] <<= 1;
+}
+
+int qmgr_request_queue(unsigned int queue, unsigned int len /* dwords */,
+		       unsigned int nearly_empty_watermark,
+		       unsigned int nearly_full_watermark)
+{
+	u32 cfg, addr = 0, mask[4]; /* in 16-dwords */
+	int err;
+
+	if (queue >= HALF_QUEUES)
+		return -ERANGE;
+
+	if ((nearly_empty_watermark | nearly_full_watermark) & ~7)
+		return -EINVAL;
+
+	switch (len) {
+	case  16:
+		cfg = 0 << 24;
+		mask[0] = 0x1;
+		break;
+	case  32:
+		cfg = 1 << 24;
+		mask[0] = 0x3;
+		break;
+	case  64:
+		cfg = 2 << 24;
+		mask[0] = 0xF;
+		break;
+	case 128:
+		cfg = 3 << 24;
+		mask[0] = 0xFF;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	cfg |= nearly_empty_watermark << 26;
+	cfg |= nearly_full_watermark << 29;
+	len /= 16;		/* in 16-dwords: 1, 2, 4 or 8 */
+	mask[1] = mask[2] = mask[3] = 0;
+
+	if (!try_module_get(THIS_MODULE))
+		return -ENODEV;
+
+	spin_lock_irq(&qmgr_lock);
+	if (__raw_readl(&qmgr_regs->sram[queue])) {
+		err = -EBUSY;
+		goto err;
+	}
+
+	while (1) {
+		if (!(used_sram_bitmap[0] & mask[0]) &&
+		    !(used_sram_bitmap[1] & mask[1]) &&
+		    !(used_sram_bitmap[2] & mask[2]) &&
+		    !(used_sram_bitmap[3] & mask[3]))
+			break; /* found free space */
+
+		addr++;
+		shift_mask(mask);
+		if (addr + len > ARRAY_SIZE(qmgr_regs->sram)) {
+			printk(KERN_ERR "qmgr: no free SRAM space for"
+			       " queue %i\n", queue);
+			err = -ENOMEM;
+			goto err;
+		}
+	}
+
+	used_sram_bitmap[0] |= mask[0];
+	used_sram_bitmap[1] |= mask[1];
+	used_sram_bitmap[2] |= mask[2];
+	used_sram_bitmap[3] |= mask[3];
+	__raw_writel(cfg | (addr << 14), &qmgr_regs->sram[queue]);
+	spin_unlock_irq(&qmgr_lock);
+
+#if DEBUG
+	printk(KERN_DEBUG "qmgr: requested queue %i, addr = 0x%02X\n",
+	       queue, addr);
+#endif
+	return 0;
+
+err:
+	spin_unlock_irq(&qmgr_lock);
+	module_put(THIS_MODULE);
+	return err;
+}
+
+void qmgr_release_queue(unsigned int queue)
+{
+	u32 cfg, addr, mask[4];
+
+	BUG_ON(queue >= HALF_QUEUES); /* not in valid range */
+
+	spin_lock_irq(&qmgr_lock);
+	cfg = __raw_readl(&qmgr_regs->sram[queue]);
+	addr = (cfg >> 14) & 0xFF;
+
+	BUG_ON(!addr);		/* not requested */
+
+	switch ((cfg >> 24) & 3) {
+	case 0: mask[0] = 0x1; break;
+	case 1: mask[0] = 0x3; break;
+	case 2: mask[0] = 0xF; break;
+	case 3: mask[0] = 0xFF; break;
+	}
+
+	while (addr--)
+		shift_mask(mask);
+
+	__raw_writel(0, &qmgr_regs->sram[queue]);
+
+	used_sram_bitmap[0] &= ~mask[0];
+	used_sram_bitmap[1] &= ~mask[1];
+	used_sram_bitmap[2] &= ~mask[2];
+	used_sram_bitmap[3] &= ~mask[3];
+	irq_handlers[queue] = NULL; /* catch IRQ bugs */
+	spin_unlock_irq(&qmgr_lock);
+
+	module_put(THIS_MODULE);
+#if DEBUG
+	printk(KERN_DEBUG "qmgr: released queue %i\n", queue);
+#endif
+}
+
+static int qmgr_init(void)
+{
+	int i, err;
+	mem_res = request_mem_region(IXP4XX_QMGR_BASE_PHYS,
+				     IXP4XX_QMGR_REGION_SIZE,
+				     "IXP4xx Queue Manager");
+	if (mem_res == NULL)
+		return -EBUSY;
+
+	qmgr_regs = ioremap(IXP4XX_QMGR_BASE_PHYS, IXP4XX_QMGR_REGION_SIZE);
+	if (qmgr_regs == NULL) {
+		err = -ENOMEM;
+		goto error_map;
+	}
+
+	/* reset qmgr registers */
+	for (i = 0; i < 4; i++) {
+		__raw_writel(0x33333333, &qmgr_regs->stat1[i]);
+		__raw_writel(0, &qmgr_regs->irqsrc[i]);
+	}
+	for (i = 0; i < 2; i++) {
+		__raw_writel(0, &qmgr_regs->stat2[i]);
+		__raw_writel(0xFFFFFFFF, &qmgr_regs->irqstat[i]); /* clear */
+		__raw_writel(0, &qmgr_regs->irqen[i]);
+	}
+
+	for (i = 0; i < QUEUES; i++)
+		__raw_writel(0, &qmgr_regs->sram[i]);
+
+	err = request_irq(IRQ_IXP4XX_QM1, qmgr_irq1, 0,
+			  "IXP4xx Queue Manager", NULL);
+	if (err) {
+		printk(KERN_ERR "qmgr: failed to request IRQ%i\n",
+		       IRQ_IXP4XX_QM1);
+		goto error_irq;
+	}
+
+	used_sram_bitmap[0] = 0xF; /* 4 first pages reserved for config */
+	spin_lock_init(&qmgr_lock);
+
+	printk(KERN_INFO "IXP4xx Queue Manager initialized.\n");
+	return 0;
+
+error_irq:
+	iounmap(qmgr_regs);
+error_map:
+	release_mem_region(IXP4XX_QMGR_BASE_PHYS, IXP4XX_QMGR_REGION_SIZE);
+	return err;
+}
+
+static void qmgr_remove(void)
+{
+	free_irq(IRQ_IXP4XX_QM1, NULL);
+	synchronize_irq(IRQ_IXP4XX_QM1);
+	iounmap(qmgr_regs);
+	release_mem_region(IXP4XX_QMGR_BASE_PHYS, IXP4XX_QMGR_REGION_SIZE);
+}
+
+module_init(qmgr_init);
+module_exit(qmgr_remove);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Krzysztof Halasa");
+
+EXPORT_SYMBOL(qmgr_regs);
+EXPORT_SYMBOL(qmgr_set_irq);
+EXPORT_SYMBOL(qmgr_enable_irq);
+EXPORT_SYMBOL(qmgr_disable_irq);
+EXPORT_SYMBOL(qmgr_request_queue);
+EXPORT_SYMBOL(qmgr_release_queue);

arch/arm/mach-ixp4xx/nas100d-power.c

-/*
- * arch/arm/mach-ixp4xx/nas100d-power.c
- *
- * NAS 100d Power/Reset driver
- *
- * Copyright (C) 2005 Tower Technologies
- *
- * based on nas100d-io.c
- *  Copyright (C) 2004 Karen Spearel
- *
- * Author: Alessandro Zummo <a.zummo@towertech.it>
- * Maintainers: http://www.nslu2-linux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/module.h>
-#include <linux/reboot.h>
-
-#include <asm/mach-types.h>
-
-static irqreturn_t nas100d_reset_handler(int irq, void *dev_id)
-{
-	/* Signal init to do the ctrlaltdel action, this will bypass init if
-	 * it hasn't started and do a kernel_restart.
-	 */
-	ctrl_alt_del();
-
-	return IRQ_HANDLED;
-}
-
-static int __init nas100d_power_init(void)
-{
-	if (!(machine_is_nas100d()))
-		return 0;
-
-	set_irq_type(NAS100D_RB_IRQ, IRQT_LOW);
-
-	if (request_irq(NAS100D_RB_IRQ, &nas100d_reset_handler,
-		IRQF_DISABLED, "NAS100D reset button", NULL) < 0) {
-
-		printk(KERN_DEBUG "Reset Button IRQ %d not available\n",
-			NAS100D_RB_IRQ);
-
-		return -EIO;
-	}
-
-	return 0;
-}
-
-static void __exit nas100d_power_exit(void)
-{
-	if (!(machine_is_nas100d()))
-		return;
-
-	free_irq(NAS100D_RB_IRQ, NULL);
-}
-
-module_init(nas100d_power_init);
-module_exit(nas100d_power_exit);
-
-MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>");
-MODULE_DESCRIPTION("NAS100D Power/Reset driver");
-MODULE_LICENSE("GPL");

arch/arm/mach-ixp4xx/nas100d-setup.c

@@ -3,8 +3,14 @@
  *
  * NAS 100d board-setup
  *
- * based ixdp425-setup.c:
+ * Copyright (C) 2008 Rod Whitby <rod@whitby.id.au>
+ *
+ * based on ixdp425-setup.c:
  *      Copyright (C) 2003-2004 MontaVista Software, Inc.
+ * based on nas100d-power.c:
+ *	Copyright (C) 2005 Tower Technologies
+ * based on nas100d-io.c
+ *	Copyright (C) 2004 Karen Spearel
  *
  * Author: Alessandro Zummo <a.zummo@towertech.it>
  * Author: Rod Whitby <rod@whitby.id.au>
@@ -12,15 +18,22 @@
  *
  */
 
-#include <linux/kernel.h>
+#include <linux/if_ether.h>
+#include <linux/irq.h>
+#include <linux/jiffies.h>
+#include <linux/timer.h>
 #include <linux/serial.h>
 #include <linux/serial_8250.h>
 #include <linux/leds.h>
+#include <linux/reboot.h>
+#include <linux/i2c.h>
 #include <linux/i2c-gpio.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
+#include <asm/io.h>
+#include <asm/gpio.h>
 
 static struct flash_platform_data nas100d_flash_data = {
 	.map_name		= "cfi_probe",
@@ -39,35 +52,40 @@ static struct platform_device nas100d_flash = {
 	.resource		= &nas100d_flash_resource,
 };
 
-#ifdef CONFIG_LEDS_IXP4XX
-static struct resource nas100d_led_resources[] = {
+static struct i2c_board_info __initdata nas100d_i2c_board_info [] = {
+	{
+		I2C_BOARD_INFO("rtc-pcf8563", 0x51),
+	},
+};
+
+static struct gpio_led nas100d_led_pins[] = {
 	{
 		.name		= "wlan",   /* green led */
-		.start		= 0,
-		.end		= 0,
-		.flags		= IXP4XX_GPIO_LOW,
+		.gpio		= NAS100D_LED_WLAN_GPIO,
+		.active_low	= true,
 	},
 	{
-		.name		= "ready",  /* blue power led (off is flashing!) */
-		.start		= 15,
-		.end		= 15,
-		.flags		= IXP4XX_GPIO_LOW,
+		.name		= "power",  /* blue power led (off=flashing) */
+		.gpio		= NAS100D_LED_PWR_GPIO,
+		.active_low	= true,
 	},
 	{
 		.name		= "disk",   /* yellow led */
-		.start		= 3,
-		.end		= 3,
-		.flags		= IXP4XX_GPIO_LOW,
+		.gpio		= NAS100D_LED_DISK_GPIO,
+		.active_low	= true,
 	},
 };
 
+static struct gpio_led_platform_data nas100d_led_data = {
+	.num_leds		= ARRAY_SIZE(nas100d_led_pins),
+	.leds			= nas100d_led_pins,
+};
+
 static struct platform_device nas100d_leds = {
-	.name			= "IXP4XX-GPIO-LED",
+	.name			= "leds-gpio",
 	.id			= -1,
-	.num_resources		= ARRAY_SIZE(nas100d_led_resources),
-	.resource		= nas100d_led_resources,
+	.dev.platform_data	= &nas100d_led_data,
 };
-#endif
 
 static struct i2c_gpio_platform_data nas100d_i2c_gpio_data = {
 	.sda_pin		= NAS100D_SDA_PIN,
@@ -125,12 +143,28 @@ static struct platform_device nas100d_uart = {
 	.resource		= nas100d_uart_resources,
 };
 
+/* Built-in 10/100 Ethernet MAC interfaces */
+static struct eth_plat_info nas100d_plat_eth[] = {
+	{
+		.phy		= 0,
+		.rxq		= 3,
+		.txreadyq	= 20,
+	}
+};
+
+static struct platform_device nas100d_eth[] = {
+	{
+		.name			= "ixp4xx_eth",
+		.id			= IXP4XX_ETH_NPEB,
+		.dev.platform_data	= nas100d_plat_eth,
+	}
+};
+
 static struct platform_device *nas100d_devices[] __initdata = {
 	&nas100d_i2c_gpio,
 	&nas100d_flash,
-#ifdef CONFIG_LEDS_IXP4XX
 	&nas100d_leds,
-#endif
+	&nas100d_eth[0],
 };
 
 static void nas100d_power_off(void)
@@ -144,8 +178,63 @@ static void nas100d_power_off(void)
 	gpio_line_set(NAS100D_PO_GPIO, IXP4XX_GPIO_HIGH);
 }
 
+/* This is used to make sure the power-button pusher is serious.  The button
+ * must be held until the value of this counter reaches zero.
+ */
+static int power_button_countdown;
+
+/* Must hold the button down for at least this many counts to be processed */
+#define PBUTTON_HOLDDOWN_COUNT 4 /* 2 secs */
+
+static void nas100d_power_handler(unsigned long data);
+static DEFINE_TIMER(nas100d_power_timer, nas100d_power_handler, 0, 0);
+
+static void nas100d_power_handler(unsigned long data)
+{
+	/* This routine is called twice per second to check the
+	 * state of the power button.
+	 */
+
+	if (gpio_get_value(NAS100D_PB_GPIO)) {
+
+		/* IO Pin is 1 (button pushed) */
+		if (power_button_countdown > 0)
+			power_button_countdown--;
+
+	} else {
+
+		/* Done on button release, to allow for auto-power-on mods. */
+		if (power_button_countdown == 0) {
+			/* Signal init to do the ctrlaltdel action,
+			 * this will bypass init if it hasn't started
+			 * and do a kernel_restart.
+			 */
+			ctrl_alt_del();
+
+			/* Change the state of the power LED to "blink" */
+			gpio_line_set(NAS100D_LED_PWR_GPIO, IXP4XX_GPIO_LOW);
+		} else {
+			power_button_countdown = PBUTTON_HOLDDOWN_COUNT;
+		}
+	}
+
+	mod_timer(&nas100d_power_timer, jiffies + msecs_to_jiffies(500));
+}
+
+static irqreturn_t nas100d_reset_handler(int irq, void *dev_id)
+{
+	/* This is the paper-clip reset, it shuts the machine down directly. */
+	machine_power_off();
+
+	return IRQ_HANDLED;
+}
+
 static void __init nas100d_init(void)
 {
+	DECLARE_MAC_BUF(mac_buf);
+	uint8_t __iomem *f;
+	int i;
+
 	ixp4xx_sys_init();
 
 	/* gpio 14 and 15 are _not_ clocks */
@@ -155,7 +244,8 @@ static void __init nas100d_init(void)
 	nas100d_flash_resource.end =
 		IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
 
-	pm_power_off = nas100d_power_off;
+	i2c_register_board_info(0, nas100d_i2c_board_info,
+				ARRAY_SIZE(nas100d_i2c_board_info));
 
 	/*
 	 * This is only useful on a modified machine, but it is valuable
@@ -165,6 +255,48 @@ static void __init nas100d_init(void)
 	(void)platform_device_register(&nas100d_uart);
 
 	platform_add_devices(nas100d_devices, ARRAY_SIZE(nas100d_devices));
+
+	pm_power_off = nas100d_power_off;
+
+	if (request_irq(gpio_to_irq(NAS100D_RB_GPIO), &nas100d_reset_handler,
+		IRQF_DISABLED | IRQF_TRIGGER_LOW,
+		"NAS100D reset button", NULL) < 0) {
+
+		printk(KERN_DEBUG "Reset Button IRQ %d not available\n",
+			gpio_to_irq(NAS100D_RB_GPIO));
+	}
+
+	/* The power button on the Iomega NAS100d is on GPIO 14, but
+	 * it cannot handle interrupts on that GPIO line.  So we'll
+	 * have to poll it with a kernel timer.
+	 */
+
+	/* Make sure that the power button GPIO is set up as an input */
+	gpio_line_config(NAS100D_PB_GPIO, IXP4XX_GPIO_IN);
+
+	/* Set the initial value for the power button IRQ handler */
+	power_button_countdown = PBUTTON_HOLDDOWN_COUNT;
+
+	mod_timer(&nas100d_power_timer, jiffies + msecs_to_jiffies(500));
+
+	/*
+	 * Map in a portion of the flash and read the MAC address.
+	 * Since it is stored in BE in the flash itself, we need to
+	 * byteswap it if we're in LE mode.
+	 */
+	f = ioremap(IXP4XX_EXP_BUS_BASE(0), 0x1000000);
+	if (f) {
+		for (i = 0; i < 6; i++)
+#ifdef __ARMEB__
+			nas100d_plat_eth[0].hwaddr[i] = readb(f + 0xFC0FD8 + i);
+#else
+			nas100d_plat_eth[0].hwaddr[i] = readb(f + 0xFC0FD8 + (i^3));
+#endif
+		iounmap(f);
+	}
+	printk(KERN_INFO "NAS100D: Using MAC address %s for port 0\n",
+	       print_mac(mac_buf, nas100d_plat_eth[0].hwaddr));
+
 }
 
 MACHINE_START(NAS100D, "Iomega NAS 100d")

arch/arm/mach-ixp4xx/nslu2-power.c

-/*
- * arch/arm/mach-ixp4xx/nslu2-power.c
- *
- * NSLU2 Power/Reset driver
- *
- * Copyright (C) 2005 Tower Technologies
- *
- * based on nslu2-io.c
- *  Copyright (C) 2004 Karen Spearel
- *
- * Author: Alessandro Zummo <a.zummo@towertech.it>
- * Maintainers: http://www.nslu2-linux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/module.h>
-#include <linux/reboot.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-
-#include <asm/mach-types.h>
-
-static irqreturn_t nslu2_power_handler(int irq, void *dev_id)
-{
-	/* Signal init to do the ctrlaltdel action, this will bypass init if
-	 * it hasn't started and do a kernel_restart.
-	 */
-	ctrl_alt_del();
-
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t nslu2_reset_handler(int irq, void *dev_id)
-{
-	/* This is the paper-clip reset, it shuts the machine down directly.
-	 */
-	machine_power_off();
-
-	return IRQ_HANDLED;
-}
-
-static int __init nslu2_power_init(void)
-{
-	if (!(machine_is_nslu2()))
-		return 0;
-
-	*IXP4XX_GPIO_GPISR = 0x20400000;	/* read the 2 irqs to clr */
-
-	set_irq_type(NSLU2_RB_IRQ, IRQT_LOW);
-	set_irq_type(NSLU2_PB_IRQ, IRQT_HIGH);
-
-	if (request_irq(NSLU2_RB_IRQ, &nslu2_reset_handler,
-		IRQF_DISABLED, "NSLU2 reset button", NULL) < 0) {
-
-		printk(KERN_DEBUG "Reset Button IRQ %d not available\n",
-			NSLU2_RB_IRQ);
-
-		return -EIO;
-	}
-
-	if (request_irq(NSLU2_PB_IRQ, &nslu2_power_handler,
-		IRQF_DISABLED, "NSLU2 power button", NULL) < 0) {
-
-		printk(KERN_DEBUG "Power Button IRQ %d not available\n",
-			NSLU2_PB_IRQ);
-
-		return -EIO;
-	}
-
-	return 0;
-}
-
-static void __exit nslu2_power_exit(void)
-{
-	if (!(machine_is_nslu2()))
-		return;
-
-	free_irq(NSLU2_RB_IRQ, NULL);
-	free_irq(NSLU2_PB_IRQ, NULL);
-}
-
-module_init(nslu2_power_init);
-module_exit(nslu2_power_exit);
-
-MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>");
-MODULE_DESCRIPTION("NSLU2 Power/Reset driver");
-MODULE_LICENSE("GPL");

arch/arm/mach-ixp4xx/nslu2-setup.c

@@ -3,27 +3,35 @@
  *
  * NSLU2 board-setup
  *
- * based ixdp425-setup.c:
+ * Copyright (C) 2008 Rod Whitby <rod@whitby.id.au>
+ *
+ * based on ixdp425-setup.c:
  *      Copyright (C) 2003-2004 MontaVista Software, Inc.
+ * based on nslu2-power.c:
+ *	Copyright (C) 2005 Tower Technologies
  *
  * Author: Mark Rakes <mrakes at mac.com>
  * Author: Rod Whitby <rod@whitby.id.au>
+ * Author: Alessandro Zummo <a.zummo@towertech.it>
  * Maintainers: http://www.nslu2-linux.org/
  *
- * Fixed missing init_time in MACHINE_START kas11 10/22/04
- * Changed to conform to new style __init ixdp425 kas11 10/22/04
  */
 
-#include <linux/kernel.h>
+#include <linux/if_ether.h>
+#include <linux/irq.h>
 #include <linux/serial.h>
 #include <linux/serial_8250.h>
 #include <linux/leds.h>
+#include <linux/reboot.h>
+#include <linux/i2c.h>
 #include <linux/i2c-gpio.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 #include <asm/mach/time.h>
+#include <asm/io.h>
+#include <asm/gpio.h>
 
 static struct flash_platform_data nslu2_flash_data = {
 	.map_name		= "cfi_probe",
@@ -47,41 +55,43 @@ static struct i2c_gpio_platform_data nslu2_i2c_gpio_data = {
 	.scl_pin		= NSLU2_SCL_PIN,
 };
 
-#ifdef CONFIG_LEDS_IXP4XX
-static struct resource nslu2_led_resources[] = {
+static struct i2c_board_info __initdata nslu2_i2c_board_info [] = {
+	{
+		I2C_BOARD_INFO("rtc-x1205", 0x6f),
+	},
+};
+
+static struct gpio_led nslu2_led_pins[] = {
 	{
 		.name		= "ready",  /* green led */
-		.start		= NSLU2_LED_GRN_GPIO,
-		.end		= NSLU2_LED_GRN_GPIO,
-		.flags		= IXP4XX_GPIO_HIGH,
+		.gpio		= NSLU2_LED_GRN_GPIO,
 	},
 	{
 		.name		= "status", /* red led */
-		.start		= NSLU2_LED_RED_GPIO,
-		.end		= NSLU2_LED_RED_GPIO,
-		.flags		= IXP4XX_GPIO_HIGH,
+		.gpio		= NSLU2_LED_RED_GPIO,
 	},
 	{
 		.name		= "disk-1",
-		.start		= NSLU2_LED_DISK1_GPIO,
-		.end		= NSLU2_LED_DISK1_GPIO,
-		.flags		= IXP4XX_GPIO_LOW,
+		.gpio		= NSLU2_LED_DISK1_GPIO,
+		.active_low	= true,
 	},
 	{
 		.name		= "disk-2",
-		.start		= NSLU2_LED_DISK2_GPIO,
-		.end		= NSLU2_LED_DISK2_GPIO,
-		.flags		= IXP4XX_GPIO_LOW,
+		.gpio		= NSLU2_LED_DISK2_GPIO,
+		.active_low	= true,
 	},
 };
 
+static struct gpio_led_platform_data nslu2_led_data = {
+	.num_leds		= ARRAY_SIZE(nslu2_led_pins),
+	.leds			= nslu2_led_pins,
+};
+
 static struct platform_device nslu2_leds = {
-	.name			= "IXP4XX-GPIO-LED",
+	.name			= "leds-gpio",
 	.id			= -1,
-	.num_resources		= ARRAY_SIZE(nslu2_led_resources),
-	.resource		= nslu2_led_resources,
+	.dev.platform_data	= &nslu2_led_data,
 };
-#endif
 
 static struct platform_device nslu2_i2c_gpio = {
 	.name			= "i2c-gpio",
@@ -140,13 +150,29 @@ static struct platform_device nslu2_uart = {
 	.resource		= nslu2_uart_resources,
 };
 
+/* Built-in 10/100 Ethernet MAC interfaces */
+static struct eth_plat_info nslu2_plat_eth[] = {
+	{
+		.phy		= 1,
+		.rxq		= 3,
+		.txreadyq	= 20,
+	}
+};
+
+static struct platform_device nslu2_eth[] = {
+	{
+		.name			= "ixp4xx_eth",
+		.id			= IXP4XX_ETH_NPEB,
+		.dev.platform_data	= nslu2_plat_eth,
+	}
+};
+
 static struct platform_device *nslu2_devices[] __initdata = {
 	&nslu2_i2c_gpio,
 	&nslu2_flash,
 	&nslu2_beeper,
-#ifdef CONFIG_LEDS_IXP4XX
 	&nslu2_leds,
-#endif
+	&nslu2_eth[0],
 };
 
 static void nslu2_power_off(void)
@@ -160,6 +186,25 @@ static void nslu2_power_off(void)
 	gpio_line_set(NSLU2_PO_GPIO, IXP4XX_GPIO_HIGH);
 }
 
+static irqreturn_t nslu2_power_handler(int irq, void *dev_id)
+{
+	/* Signal init to do the ctrlaltdel action, this will bypass init if
+	 * it hasn't started and do a kernel_restart.
+	 */
+	ctrl_alt_del();
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t nslu2_reset_handler(int irq, void *dev_id)
+{
+	/* This is the paper-clip reset, it shuts the machine down directly.
+	 */
+	machine_power_off();
+
+	return IRQ_HANDLED;
+}
+
 static void __init nslu2_timer_init(void)
 {
     /* The xtal on this machine is non-standard. */
@@ -175,13 +220,18 @@ static struct sys_timer nslu2_timer = {
 
 static void __init nslu2_init(void)
 {
+	DECLARE_MAC_BUF(mac_buf);
+	uint8_t __iomem *f;
+	int i;
+
 	ixp4xx_sys_init();
 
 	nslu2_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
 	nslu2_flash_resource.end =
 		IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
 
-	pm_power_off = nslu2_power_off;
+	i2c_register_board_info(0, nslu2_i2c_board_info,
+				ARRAY_SIZE(nslu2_i2c_board_info));
 
 	/*
 	 * This is only useful on a modified machine, but it is valuable
@@ -191,6 +241,43 @@ static void __init nslu2_init(void)
 	(void)platform_device_register(&nslu2_uart);
 
 	platform_add_devices(nslu2_devices, ARRAY_SIZE(nslu2_devices));
+
+	pm_power_off = nslu2_power_off;
+
+	if (request_irq(gpio_to_irq(NSLU2_RB_GPIO), &nslu2_reset_handler,
+		IRQF_DISABLED | IRQF_TRIGGER_LOW,
+		"NSLU2 reset button", NULL) < 0) {
+
+		printk(KERN_DEBUG "Reset Button IRQ %d not available\n",
+			gpio_to_irq(NSLU2_RB_GPIO));
+	}
+
+	if (request_irq(gpio_to_irq(NSLU2_PB_GPIO), &nslu2_power_handler,
+		IRQF_DISABLED | IRQF_TRIGGER_HIGH,
+		"NSLU2 power button", NULL) < 0) {
+
+		printk(KERN_DEBUG "Power Button IRQ %d not available\n",
+			gpio_to_irq(NSLU2_PB_GPIO));
+	}
+
+	/*
+	 * Map in a portion of the flash and read the MAC address.
+	 * Since it is stored in BE in the flash itself, we need to
+	 * byteswap it if we're in LE mode.
+	 */
+	f = ioremap(IXP4XX_EXP_BUS_BASE(0), 0x40000);
+	if (f) {
+		for (i = 0; i < 6; i++)
+#ifdef __ARMEB__
+			nslu2_plat_eth[0].hwaddr[i] = readb(f + 0x3FFB0 + i);
+#else
+			nslu2_plat_eth[0].hwaddr[i] = readb(f + 0x3FFB0 + (i^3));
+#endif
+		iounmap(f);
+	}
+	printk(KERN_INFO "NSLU2: Using MAC address %s for port 0\n",
+	       print_mac(mac_buf, nslu2_plat_eth[0].hwaddr));
+
 }
 
 MACHINE_START(NSLU2, "Linksys NSLU2")

arch/arm/mach-pxa/Makefile

@@ -6,7 +6,7 @@
 obj-y				+= clock.o devices.o generic.o irq.o dma.o time.o
 obj-$(CONFIG_PXA25x)		+= pxa25x.o
 obj-$(CONFIG_PXA27x)		+= pxa27x.o
-obj-$(CONFIG_PXA3xx)		+= pxa3xx.o mfp.o
+obj-$(CONFIG_PXA3xx)		+= pxa3xx.o mfp.o smemc.o
 obj-$(CONFIG_CPU_PXA300)	+= pxa300.o
 obj-$(CONFIG_CPU_PXA320)	+= pxa320.o
 

arch/arm/mach-pxa/cm-x270.c

@@ -29,6 +29,7 @@
 #include <asm/mach/map.h>
 
 #include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-regs.h>
 #include <asm/arch/pxafb.h>
 #include <asm/arch/ohci.h>
 #include <asm/arch/mmc.h>

arch/arm/mach-pxa/devices.c

@@ -10,6 +10,7 @@
 #include <asm/arch/mmc.h>
 #include <asm/arch/irda.h>
 #include <asm/arch/i2c.h>
+#include <asm/arch/ohci.h>
 
 #include "devices.h"
 

arch/arm/mach-pxa/generic.c

@@ -23,6 +23,7 @@
 #include <linux/ioport.h>
 #include <linux/pm.h>
 #include <linux/string.h>
+#include <linux/sysdev.h>
 
 #include <asm/hardware.h>
 #include <asm/irq.h>
@@ -226,3 +227,59 @@ void __init pxa_map_io(void)
 	iotable_init(standard_io_desc, ARRAY_SIZE(standard_io_desc));
 	get_clk_frequency_khz(1);
 }
+
+#ifdef CONFIG_PM
+
+static unsigned long saved_gplr[4];
+static unsigned long saved_gpdr[4];
+static unsigned long saved_grer[4];
+static unsigned long saved_gfer[4];
+
+static int pxa_gpio_suspend(struct sys_device *dev, pm_message_t state)
+{
+	int i, gpio;
+
+	for (gpio = 0, i = 0; gpio < pxa_last_gpio; gpio += 32, i++) {
+		saved_gplr[i] = GPLR(gpio);
+		saved_gpdr[i] = GPDR(gpio);
+		saved_grer[i] = GRER(gpio);
+		saved_gfer[i] = GFER(gpio);
+
+		/* Clear GPIO transition detect bits */
+		GEDR(gpio) = GEDR(gpio);
+	}
+	return 0;
+}
+
+static int pxa_gpio_resume(struct sys_device *dev)
+{
+	int i, gpio;
+
+	for (gpio = 0, i = 0; gpio < pxa_last_gpio; gpio += 32, i++) {
+		/* restore level with set/clear */
+		GPSR(gpio) = saved_gplr[i];
+		GPCR(gpio) = ~saved_gplr[i];
+
+		GRER(gpio) = saved_grer[i];
+		GFER(gpio) = saved_gfer[i];
+		GPDR(gpio) = saved_gpdr[i];
+	}
+	return 0;
+}
+#else
+#define pxa_gpio_suspend	NULL
+#define pxa_gpio_resume		NULL
+#endif
+
+struct sysdev_class pxa_gpio_sysclass = {
+	.name		= "gpio",
+	.suspend	= pxa_gpio_suspend,
+	.resume		= pxa_gpio_resume,
+};
+
+static int __init pxa_gpio_init(void)
+{
+	return sysdev_class_register(&pxa_gpio_sysclass);
+}
+
+core_initcall(pxa_gpio_init);

arch/arm/mach-pxa/generic.h

@@ -52,3 +52,6 @@ extern unsigned pxa3xx_get_memclk_frequency_10khz(void);
 #define pxa3xx_get_clk_frequency_khz(x)		(0)
 #define pxa3xx_get_memclk_frequency_10khz()	(0)
 #endif
+
+extern struct sysdev_class pxa_irq_sysclass;
+extern struct sysdev_class pxa_gpio_sysclass;

arch/arm/mach-pxa/irq.c

@@ -15,6 +15,7 @@
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/interrupt.h>
+#include <linux/sysdev.h>
 
 #include <asm/hardware.h>
 #include <asm/irq.h>
@@ -321,3 +322,64 @@ void __init pxa_init_irq_set_wake(int (*set_wake)(unsigned int, unsigned int))
 	pxa_low_gpio_chip.set_wake = set_wake;
 	pxa_muxed_gpio_chip.set_wake = set_wake;
 }
+
+#ifdef CONFIG_PM
+static unsigned long saved_icmr[2];
+
+static int pxa_irq_suspend(struct sys_device *dev, pm_message_t state)
+{
+	switch (dev->id) {
+	case 0:
+		saved_icmr[0] = ICMR;
+		ICMR = 0;
+		break;
+#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
+	case 1:
+		saved_icmr[1] = ICMR2;
+		ICMR2 = 0;
+		break;
+#endif
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int pxa_irq_resume(struct sys_device *dev)
+{
+	switch (dev->id) {
+	case 0:
+		ICMR = saved_icmr[0];
+		ICLR = 0;
+		ICCR = 1;
+		break;
+#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
+	case 1:
+		ICMR2 = saved_icmr[1];
+		ICLR2 = 0;
+		break;
+#endif
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+#else
+#define pxa_irq_suspend		NULL
+#define pxa_irq_resume		NULL
+#endif
+
+struct sysdev_class pxa_irq_sysclass = {
+	.name		= "irq",
+	.suspend	= pxa_irq_suspend,
+	.resume		= pxa_irq_resume,
+};
+
+static int __init pxa_irq_init(void)
+{
+	return sysdev_class_register(&pxa_irq_sysclass);
+}
+
+core_initcall(pxa_irq_init);

arch/arm/mach-pxa/mfp.c

@@ -22,6 +22,7 @@
 #include <asm/hardware.h>
 #include <asm/arch/mfp.h>
 #include <asm/arch/mfp-pxa3xx.h>
+#include <asm/arch/pxa3xx-regs.h>
 
 /* mfp_spin_lock is used to ensure that MFP register configuration
  * (most likely a read-modify-write operation) is atomic, and that
@@ -223,11 +224,19 @@ static int pxa3xx_mfp_resume(struct sys_device *d)
 		struct pxa3xx_mfp_pin *p = &mfp_table[pin];
 		__mfp_config_run(p);
 	}
+
+	/* clear RDH bit when MFP settings are restored
+	 *
+	 * NOTE: the last 3 bits DxS are write-1-to-clear so carefully
+	 * preserve them here in case they will be referenced later
+	 */
+	ASCR &= ~(ASCR_RDH | ASCR_D1S | ASCR_D2S | ASCR_D3S);
+
 	return 0;
 }
 
 static struct sysdev_class mfp_sysclass = {
-	set_kset_name("mfp"),
+	.name		= "mfp",
 	.suspend	= pxa3xx_mfp_suspend,
 	.resume 	= pxa3xx_mfp_resume,
 };

arch/arm/mach-pxa/pcm027.c

@@ -29,6 +29,7 @@
 #include <asm/mach/arch.h>
 #include <asm/arch/hardware.h>
 #include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-regs.h>
 #include <asm/arch/pxa2xx_spi.h>
 #include <asm/arch/pcm027.h>
 #include "generic.h"

arch/arm/mach-pxa/poodle.c

@@ -164,7 +164,7 @@ static struct resource poodlets_resources[] = {
 	},
 };
 
-static unsigned long poodle_get_hsync_len(void)
+static unsigned long poodle_get_hsync_invperiod(void)
 {
 	return 0;
 }
@@ -174,7 +174,7 @@ static void poodle_null_hsync(void)
 }
 
 static struct corgits_machinfo  poodle_ts_machinfo = {
-	.get_hsync_len   = poodle_get_hsync_len,
+	.get_hsync_invperiod	= poodle_get_hsync_invperiod,
 	.put_hsync       	= poodle_null_hsync,
 	.wait_hsync      	= poodle_null_hsync,
 };

arch/arm/mach-pxa/pxa25x.c

@@ -21,6 +21,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/suspend.h>
+#include <linux/sysdev.h>
 
 #include <asm/hardware.h>
 #include <asm/arch/irqs.h>
@@ -141,11 +142,6 @@ static struct clk pxa25x_clks[] = {
 #define SAVE(x)		sleep_save[SLEEP_SAVE_##x] = x
 #define RESTORE(x)	x = sleep_save[SLEEP_SAVE_##x]
 
-#define RESTORE_GPLEVEL(n) do { \
-	GPSR##n = sleep_save[SLEEP_SAVE_GPLR##n]; \
-	GPCR##n = ~sleep_save[SLEEP_SAVE_GPLR##n]; \
-} while (0)
-
 /*
  * List of global PXA peripheral registers to preserve.
  * More ones like CP and general purpose register values are preserved
@@ -153,10 +149,6 @@ static struct clk pxa25x_clks[] = {
  */
 enum {	SLEEP_SAVE_START = 0,
 
-	SLEEP_SAVE_GPLR0, SLEEP_SAVE_GPLR1, SLEEP_SAVE_GPLR2,
-	SLEEP_SAVE_GPDR0, SLEEP_SAVE_GPDR1, SLEEP_SAVE_GPDR2,
-	SLEEP_SAVE_GRER0, SLEEP_SAVE_GRER1, SLEEP_SAVE_GRER2,
-	SLEEP_SAVE_GFER0, SLEEP_SAVE_GFER1, SLEEP_SAVE_GFER2,
 	SLEEP_SAVE_PGSR0, SLEEP_SAVE_PGSR1, SLEEP_SAVE_PGSR2,
 
 	SLEEP_SAVE_GAFR0_L, SLEEP_SAVE_GAFR0_U,
@@ -165,7 +157,6 @@ enum {	SLEEP_SAVE_START = 0,
 
 	SLEEP_SAVE_PSTR,
 
-	SLEEP_SAVE_ICMR,
 	SLEEP_SAVE_CKEN,
 
 	SLEEP_SAVE_SIZE
@@ -174,17 +165,12 @@ enum {	SLEEP_SAVE_START = 0,
 
 static void pxa25x_cpu_pm_save(unsigned long *sleep_save)
 {
-	SAVE(GPLR0); SAVE(GPLR1); SAVE(GPLR2);
-	SAVE(GPDR0); SAVE(GPDR1); SAVE(GPDR2);
-	SAVE(GRER0); SAVE(GRER1); SAVE(GRER2);
-	SAVE(GFER0); SAVE(GFER1); SAVE(GFER2);
 	SAVE(PGSR0); SAVE(PGSR1); SAVE(PGSR2);
 
 	SAVE(GAFR0_L); SAVE(GAFR0_U);
 	SAVE(GAFR1_L); SAVE(GAFR1_U);
 	SAVE(GAFR2_L); SAVE(GAFR2_U);
 
-	SAVE(ICMR); ICMR = 0;
 	SAVE(CKEN);
 	SAVE(PSTR);
 
@@ -198,22 +184,14 @@ static void pxa25x_cpu_pm_restore(unsigned long *sleep_save)
 	PSPR = 0;
 
 	/* restore registers */
-	RESTORE_GPLEVEL(0); RESTORE_GPLEVEL(1); RESTORE_GPLEVEL(2);
-	RESTORE(GPDR0); RESTORE(GPDR1); RESTORE(GPDR2);
 	RESTORE(GAFR0_L); RESTORE(GAFR0_U);
 	RESTORE(GAFR1_L); RESTORE(GAFR1_U);
 	RESTORE(GAFR2_L); RESTORE(GAFR2_U);
-	RESTORE(GRER0); RESTORE(GRER1); RESTORE(GRER2);
-	RESTORE(GFER0); RESTORE(GFER1); RESTORE(GFER2);
 	RESTORE(PGSR0); RESTORE(PGSR1); RESTORE(PGSR2);
 
 	PSSR = PSSR_RDH | PSSR_PH;
 
 	RESTORE(CKEN);
-
-	ICLR = 0;
-	ICCR = 1;
-	RESTORE(ICMR);
 	RESTORE(PSTR);
 }
 
@@ -304,9 +282,17 @@ static struct platform_device *pxa25x_devices[] __initdata = {
 	&pxa25x_device_assp,
 };
 
+static struct sys_device pxa25x_sysdev[] = {
+	{
+		.cls	= &pxa_irq_sysclass,
+	}, {
+		.cls	= &pxa_gpio_sysclass,
+	},
+};
+
 static int __init pxa25x_init(void)
 {
-	int ret = 0;
+	int i, ret = 0;
 
 	/* Only add HWUART for PXA255/26x; PXA210/250/27x do not have it. */
 	if (cpu_is_pxa25x())
@@ -320,9 +306,18 @@ static int __init pxa25x_init(void)
 
 		pxa25x_init_pm();
 
+		for (i = 0; i < ARRAY_SIZE(pxa25x_sysdev); i++) {
+			ret = sysdev_register(&pxa25x_sysdev[i]);
+			if (ret)
+				pr_err("failed to register sysdev[%d]\n", i);
+		}
+
 		ret = platform_add_devices(pxa25x_devices,
 					   ARRAY_SIZE(pxa25x_devices));
+		if (ret)
+			return ret;
 	}
+
 	/* Only add HWUART for PXA255/26x; PXA210/250/27x do not have it. */
 	if (cpu_is_pxa25x())
 		ret = platform_device_register(&pxa_device_hwuart);

arch/arm/mach-pxa/pxa27x.c

@@ -16,6 +16,7 @@
 #include <linux/init.h>
 #include <linux/suspend.h>
 #include <linux/platform_device.h>
+#include <linux/sysdev.h>
 
 #include <asm/hardware.h>
 #include <asm/irq.h>
@@ -171,11 +172,6 @@ static struct clk pxa27x_clks[] = {
 #define SAVE(x)		sleep_save[SLEEP_SAVE_##x] = x
 #define RESTORE(x)	x = sleep_save[SLEEP_SAVE_##x]
 
-#define RESTORE_GPLEVEL(n) do { \
-	GPSR##n = sleep_save[SLEEP_SAVE_GPLR##n]; \
-	GPCR##n = ~sleep_save[SLEEP_SAVE_GPLR##n]; \
-} while (0)
-
 /*
  * List of global PXA peripheral registers to preserve.
  * More ones like CP and general purpose register values are preserved
@@ -183,10 +179,6 @@ static struct clk pxa27x_clks[] = {
  */
 enum {	SLEEP_SAVE_START = 0,
 
-	SLEEP_SAVE_GPLR0, SLEEP_SAVE_GPLR1, SLEEP_SAVE_GPLR2, SLEEP_SAVE_GPLR3,
-	SLEEP_SAVE_GPDR0, SLEEP_SAVE_GPDR1, SLEEP_SAVE_GPDR2, SLEEP_SAVE_GPDR3,
-	SLEEP_SAVE_GRER0, SLEEP_SAVE_GRER1, SLEEP_SAVE_GRER2, SLEEP_SAVE_GRER3,
-	SLEEP_SAVE_GFER0, SLEEP_SAVE_GFER1, SLEEP_SAVE_GFER2, SLEEP_SAVE_GFER3,
 	SLEEP_SAVE_PGSR0, SLEEP_SAVE_PGSR1, SLEEP_SAVE_PGSR2, SLEEP_SAVE_PGSR3,
 
 	SLEEP_SAVE_GAFR0_L, SLEEP_SAVE_GAFR0_U,
@@ -196,7 +188,6 @@ enum {	SLEEP_SAVE_START = 0,
 
 	SLEEP_SAVE_PSTR,
 
-	SLEEP_SAVE_ICMR,
 	SLEEP_SAVE_CKEN,
 
 	SLEEP_SAVE_MDREFR,
@@ -208,10 +199,6 @@ enum {	SLEEP_SAVE_START = 0,
 
 void pxa27x_cpu_pm_save(unsigned long *sleep_save)
 {
-	SAVE(GPLR0); SAVE(GPLR1); SAVE(GPLR2); SAVE(GPLR3);
-	SAVE(GPDR0); SAVE(GPDR1); SAVE(GPDR2); SAVE(GPDR3);
-	SAVE(GRER0); SAVE(GRER1); SAVE(GRER2); SAVE(GRER3);
-	SAVE(GFER0); SAVE(GFER1); SAVE(GFER2); SAVE(GFER3);
 	SAVE(PGSR0); SAVE(PGSR1); SAVE(PGSR2); SAVE(PGSR3);
 
 	SAVE(GAFR0_L); SAVE(GAFR0_U);
@@ -223,12 +210,8 @@ void pxa27x_cpu_pm_save(unsigned long *sleep_save)
 	SAVE(PWER); SAVE(PCFR); SAVE(PRER);
 	SAVE(PFER); SAVE(PKWR);
 
-	SAVE(ICMR); ICMR = 0;
 	SAVE(CKEN);
 	SAVE(PSTR);
-
-	/* Clear GPIO transition detect bits */
-	GEDR0 = GEDR0; GEDR1 = GEDR1; GEDR2 = GEDR2; GEDR3 = GEDR3;
 }
 
 void pxa27x_cpu_pm_restore(unsigned long *sleep_save)
@@ -237,15 +220,10 @@ void pxa27x_cpu_pm_restore(unsigned long *sleep_save)
 	PSPR = 0;
 
 	/* restore registers */
-	RESTORE_GPLEVEL(0); RESTORE_GPLEVEL(1);
-	RESTORE_GPLEVEL(2); RESTORE_GPLEVEL(3);
-	RESTORE(GPDR0); RESTORE(GPDR1); RESTORE(GPDR2); RESTORE(GPDR3);
 	RESTORE(GAFR0_L); RESTORE(GAFR0_U);
 	RESTORE(GAFR1_L); RESTORE(GAFR1_U);
 	RESTORE(GAFR2_L); RESTORE(GAFR2_U);
 	RESTORE(GAFR3_L); RESTORE(GAFR3_U);
-	RESTORE(GRER0); RESTORE(GRER1); RESTORE(GRER2); RESTORE(GRER3);
-	RESTORE(GFER0); RESTORE(GFER1); RESTORE(GFER2); RESTORE(GFER3);
 	RESTORE(PGSR0); RESTORE(PGSR1); RESTORE(PGSR2); RESTORE(PGSR3);
 
 	RESTORE(MDREFR);
@@ -256,9 +234,6 @@ void pxa27x_cpu_pm_restore(unsigned long *sleep_save)
 
 	RESTORE(CKEN);
 
-	ICLR = 0;
-	ICCR = 1;
-	RESTORE(ICMR);
 	RESTORE(PSTR);
 }
 
@@ -409,9 +384,22 @@ static struct platform_device *devices[] __initdata = {
 	&pxa27x_device_ssp3,
 };
 
+static struct sys_device pxa27x_sysdev[] = {
+	{
+		.id	= 0,
+		.cls	= &pxa_irq_sysclass,
+	}, {
+		.id	= 1,
+		.cls	= &pxa_irq_sysclass,
+	}, {
+		.cls	= &pxa_gpio_sysclass,
+	},
+};
+
 static int __init pxa27x_init(void)
 {
-	int ret = 0;
+	int i, ret = 0;
+
 	if (cpu_is_pxa27x()) {
 		clks_register(pxa27x_clks, ARRAY_SIZE(pxa27x_clks));
 
@@ -420,8 +408,15 @@ static int __init pxa27x_init(void)
 
 		pxa27x_init_pm();
 
+		for (i = 0; i < ARRAY_SIZE(pxa27x_sysdev); i++) {
+			ret = sysdev_register(&pxa27x_sysdev[i]);
+			if (ret)
+				pr_err("failed to register sysdev[%d]\n", i);
+		}
+
 		ret = platform_add_devices(devices, ARRAY_SIZE(devices));
 	}
+
 	return ret;
 }
 

arch/arm/mach-pxa/pxa3xx.c

@@ -20,6 +20,7 @@
 #include <linux/platform_device.h>
 #include <linux/irq.h>
 #include <linux/io.h>
+#include <linux/sysdev.h>
 
 #include <asm/hardware.h>
 #include <asm/arch/pxa3xx-regs.h>
@@ -39,6 +40,7 @@
 #define RO_CLK		60000000
 
 #define ACCR_D0CS	(1 << 26)
+#define ACCR_PCCE	(1 << 11)
 
 /* crystal frequency to static memory controller multiplier (SMCFS) */
 static unsigned char smcfs_mult[8] = { 6, 0, 8, 0, 0, 16, };
@@ -203,7 +205,6 @@ static struct clk pxa3xx_clks[] = {
 };
 
 #ifdef CONFIG_PM
-#define SLEEP_SAVE_SIZE	4
 
 #define ISRAM_START	0x5c000000
 #define ISRAM_SIZE	SZ_256K
@@ -211,25 +212,29 @@ static struct clk pxa3xx_clks[] = {
 static void __iomem *sram;
 static unsigned long wakeup_src;
 
-static void pxa3xx_cpu_pm_save(unsigned long *sleep_save)
-{
-	pr_debug("PM: CKENA=%08x CKENB=%08x\n", CKENA, CKENB);
+#define SAVE(x)		sleep_save[SLEEP_SAVE_##x] = x
+#define RESTORE(x)	x = sleep_save[SLEEP_SAVE_##x]
 
-	if (CKENA & (1 << CKEN_USBH)) {
-		printk(KERN_ERR "PM: USB host clock not stopped?\n");
-		CKENA &= ~(1 << CKEN_USBH);
-	}
-//	CKENA |= 1 << (CKEN_ISC & 31);
+enum {	SLEEP_SAVE_START = 0,
+	SLEEP_SAVE_CKENA,
+	SLEEP_SAVE_CKENB,
+	SLEEP_SAVE_ACCR,
 
-	/*
-	 * Low power modes require the HSIO2 clock to be enabled.
-	 */
-	CKENB |= 1 << (CKEN_HSIO2 & 31);
+	SLEEP_SAVE_SIZE,
+};
+
+static void pxa3xx_cpu_pm_save(unsigned long *sleep_save)
+{
+	SAVE(CKENA);
+	SAVE(CKENB);
+	SAVE(ACCR);
 }
 
 static void pxa3xx_cpu_pm_restore(unsigned long *sleep_save)
 {
-	CKENB &= ~(1 << (CKEN_HSIO2 & 31));
+	RESTORE(ACCR);
+	RESTORE(CKENA);
+	RESTORE(CKENB);
 }
 
 /*
@@ -265,6 +270,46 @@ static void pxa3xx_cpu_standby(unsigned int pwrmode)
 	printk("PM: AD2D0SR=%08x ASCR=%08x\n", AD2D0SR, ASCR);
 }
 
+/*
+ * NOTE:  currently, the OBM (OEM Boot Module) binary comes along with
+ * PXA3xx development kits assumes that the resuming process continues
+ * with the address stored within the first 4 bytes of SDRAM. The PSPR
+ * register is used privately by BootROM and OBM, and _must_ be set to
+ * 0x5c014000 for the moment.
+ */
+static void pxa3xx_cpu_pm_suspend(void)
+{
+	volatile unsigned long *p = (volatile void *)0xc0000000;
+	unsigned long saved_data = *p;
+
+	extern void pxa3xx_cpu_suspend(void);
+	extern void pxa3xx_cpu_resume(void);
+
+	/* resuming from D2 requires the HSIO2/BOOT/TPM clocks enabled */
+	CKENA |= (1 << CKEN_BOOT) | (1 << CKEN_TPM);
+	CKENB |= 1 << (CKEN_HSIO2 & 0x1f);
+
+	/* clear and setup wakeup source */
+	AD3SR = ~0;
+	AD3ER = wakeup_src;
+	ASCR = ASCR;
+	ARSR = ARSR;
+
+	PCFR |= (1u << 13);			/* L1_DIS */
+	PCFR &= ~((1u << 12) | (1u << 1));	/* L0_EN | SL_ROD */
+
+	PSPR = 0x5c014000;
+
+	/* overwrite with the resume address */
+	*p = virt_to_phys(pxa3xx_cpu_resume);
+
+	pxa3xx_cpu_suspend();
+
+	*p = saved_data;
+
+	AD3ER = 0;
+}
+
 static void pxa3xx_cpu_pm_enter(suspend_state_t state)
 {
 	/*
@@ -279,6 +324,7 @@ static void pxa3xx_cpu_pm_enter(suspend_state_t state)
 		break;
 
 	case PM_SUSPEND_MEM:
+		pxa3xx_cpu_pm_suspend();
 		break;
 	}
 }
@@ -452,9 +498,21 @@ static struct platform_device *devices[] __initdata = {
 	&pxa3xx_device_ssp4,
 };
 
+static struct sys_device pxa3xx_sysdev[] = {
+	{
+		.id	= 0,
+		.cls	= &pxa_irq_sysclass,
+	}, {
+		.id	= 1,
+		.cls	= &pxa_irq_sysclass,
+	}, {
+		.cls	= &pxa_gpio_sysclass,
+	},
+};
+
 static int __init pxa3xx_init(void)
 {
-	int ret = 0;
+	int i, ret = 0;
 
 	if (cpu_is_pxa3xx()) {
 		clks_register(pxa3xx_clks, ARRAY_SIZE(pxa3xx_clks));
@@ -464,9 +522,16 @@ static int __init pxa3xx_init(void)
 
 		pxa3xx_init_pm();
 
-		return platform_add_devices(devices, ARRAY_SIZE(devices));
+		for (i = 0; i < ARRAY_SIZE(pxa3xx_sysdev); i++) {
+			ret = sysdev_register(&pxa3xx_sysdev[i]);
+			if (ret)
+				pr_err("failed to register sysdev[%d]\n", i);
 		}
-	return 0;
+
+		ret = platform_add_devices(devices, ARRAY_SIZE(devices));
+	}
+
+	return ret;
 }
 
 subsys_initcall(pxa3xx_init);

arch/arm/mach-pxa/sleep.S

@@ -50,6 +50,108 @@ pxa_cpu_save_sp:
 	str	r0, [r1]
 	ldr	pc, [sp], #4
 
+#ifdef CONFIG_PXA3xx
+/*
+ * pxa3xx_cpu_suspend() - forces CPU into sleep state (S2D3C4)
+ *
+ * NOTE:  unfortunately, pxa_cpu_save_cp can not be reused here since
+ * the auxiliary control register address is different between pxa3xx
+ * and pxa{25x,27x}
+ */
+
+ENTRY(pxa3xx_cpu_suspend)
+
+#ifndef CONFIG_IWMMXT
+	mra	r2, r3, acc0
+#endif
+	stmfd	sp!, {r2 - r12, lr}	@ save registers on stack
+
+	mrc	p14, 0, r3, c6, c0, 0		@ clock configuration, for turbo mode
+	mrc	p15, 0, r4, c15, c1, 0		@ CP access reg
+	mrc	p15, 0, r5, c13, c0, 0		@ PID
+	mrc 	p15, 0, r6, c3, c0, 0		@ domain ID
+	mrc 	p15, 0, r7, c2, c0, 0		@ translation table base addr
+	mrc	p15, 0, r8, c1, c0, 1           @ auxiliary control reg
+	mrc 	p15, 0, r9, c1, c0, 0		@ control reg
+
+	bic	r3, r3, #2			@ clear frequency change bit
+
+	@ store them plus current virtual stack ptr on stack
+	mov	r10, sp
+	stmfd	sp!, {r3 - r10}
+
+	@ store physical address of stack pointer
+	mov	r0, sp
+	bl	sleep_phys_sp
+	ldr	r1, =sleep_save_sp
+	str	r0, [r1]
+
+	@ clean data cache
+	bl	xsc3_flush_kern_cache_all
+
+	mov	r0, #0x06		@ S2D3C4 mode
+	mcr	p14, 0, r0, c7, c0, 0	@ enter sleep
+
+20:	b	20b			@ waiting for sleep
+
+	.data
+	.align 5
+/*
+ * pxa3xx_cpu_resume
+ */
+
+ENTRY(pxa3xx_cpu_resume)
+
+	mov	r0, #PSR_I_BIT | PSR_F_BIT | SVC_MODE	@ set SVC, irqs off
+	msr	cpsr_c, r0
+
+	ldr	r0, sleep_save_sp		@ stack phys addr
+	ldmfd	r0, {r3 - r9, sp}		@ CP regs + virt stack ptr
+
+	mov	r1, #0
+	mcr	p15, 0, r1, c7, c7, 0		@ invalidate I & D caches, BTB
+	mcr	p15, 0, r1, c7, c10, 4		@ drain write (&fill) buffer
+	mcr	p15, 0, r1, c7, c5, 4		@ flush prefetch buffer
+	mcr	p15, 0, r1, c8, c7, 0   	@ invalidate I & D TLBs
+
+	mcr	p14, 0, r3, c6, c0, 0		@ clock configuration, turbo mode.
+	mcr	p15, 0, r4, c15, c1, 0		@ CP access reg
+	mcr	p15, 0, r5, c13, c0, 0		@ PID
+	mcr 	p15, 0, r6, c3, c0, 0		@ domain ID
+	mcr 	p15, 0, r7, c2, c0, 0		@ translation table base addr
+	mcr	p15, 0, r8, c1, c0, 1           @ auxiliary control reg
+
+	@ temporarily map resume_turn_on_mmu into the page table,
+	@ otherwise prefetch abort occurs after MMU is turned on
+	mov	r1, r7
+	bic	r1, r1, #0x00ff
+	bic	r1, r1, #0x3f00
+	ldr	r2, =0x542e
+
+	adr	r3, resume_turn_on_mmu
+	mov	r3, r3, lsr #20
+	orr	r4, r2, r3, lsl #20
+	ldr	r5, [r1, r3, lsl #2]
+	str     r4, [r1, r3, lsl #2]
+
+	@ Mapping page table address in the page table
+	mov	r6, r1, lsr #20
+	orr	r7, r2, r6, lsl #20
+	ldr	r8, [r1, r6, lsl #2]
+	str	r7, [r1, r6, lsl #2]
+
+	ldr	r2, =pxa3xx_resume_after_mmu	@ absolute virtual address
+	b	resume_turn_on_mmu		@ cache align execution
+
+	.text
+pxa3xx_resume_after_mmu:
+	/* restore the temporary mapping */
+	str	r5, [r1, r3, lsl #2]
+	str	r8, [r1, r6, lsl #2]
+	b	resume_after_mmu
+
+#endif /* CONFIG_PXA3xx */
+
 #ifdef CONFIG_PXA27x
 /*
  * pxa27x_cpu_suspend()

arch/arm/mach-pxa/smemc.c

+/*
+ * Static Memory Controller
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/sysdev.h>
+
+#define SMEMC_PHYS_BASE	(0x4A000000)
+#define SMEMC_PHYS_SIZE	(0x90)
+
+#define MSC0		(0x08)	/* Static Memory Controller Register 0 */
+#define MSC1		(0x0C)	/* Static Memory Controller Register 1 */
+#define SXCNFG		(0x1C)	/* Synchronous Static Memory Control Register */
+#define MEMCLKCFG	(0x68)	/* Clock Configuration */
+#define CSADRCFG0	(0x80)	/* Address Configuration Register for CS0 */
+#define CSADRCFG1	(0x84)	/* Address Configuration Register for CS1 */
+#define CSADRCFG2	(0x88)	/* Address Configuration Register for CS2 */
+#define CSADRCFG3	(0x8C)	/* Address Configuration Register for CS3 */
+
+#ifdef CONFIG_PM
+static void __iomem *smemc_mmio_base;
+
+static unsigned long msc[2];
+static unsigned long sxcnfg, memclkcfg;
+static unsigned long csadrcfg[4];
+
+static int pxa3xx_smemc_suspend(struct sys_device *dev, pm_message_t state)
+{
+	msc[0] = __raw_readl(smemc_mmio_base + MSC0);
+	msc[1] = __raw_readl(smemc_mmio_base + MSC1);
+	sxcnfg = __raw_readl(smemc_mmio_base + SXCNFG);
+	memclkcfg = __raw_readl(smemc_mmio_base + MEMCLKCFG);
+	csadrcfg[0] = __raw_readl(smemc_mmio_base + CSADRCFG0);
+	csadrcfg[1] = __raw_readl(smemc_mmio_base + CSADRCFG1);
+	csadrcfg[2] = __raw_readl(smemc_mmio_base + CSADRCFG2);
+	csadrcfg[3] = __raw_readl(smemc_mmio_base + CSADRCFG3);
+
+	return 0;
+}
+
+static int pxa3xx_smemc_resume(struct sys_device *dev)
+{
+	__raw_writel(msc[0], smemc_mmio_base + MSC0);
+	__raw_writel(msc[1], smemc_mmio_base + MSC1);
+	__raw_writel(sxcnfg, smemc_mmio_base + SXCNFG);
+	__raw_writel(memclkcfg, smemc_mmio_base + MEMCLKCFG);
+	__raw_writel(csadrcfg[0], smemc_mmio_base + CSADRCFG0);
+	__raw_writel(csadrcfg[1], smemc_mmio_base + CSADRCFG1);
+	__raw_writel(csadrcfg[2], smemc_mmio_base + CSADRCFG2);
+	__raw_writel(csadrcfg[3], smemc_mmio_base + CSADRCFG3);
+
+	return 0;
+}
+
+static struct sysdev_class smemc_sysclass = {
+	.name		= "smemc",
+	.suspend	= pxa3xx_smemc_suspend,
+	.resume		= pxa3xx_smemc_resume,
+};
+
+static struct sys_device smemc_sysdev = {
+	.id		= 0,
+	.cls		= &smemc_sysclass,
+};
+
+static int __init smemc_init(void)
+{
+	int ret = 0;
+
+	if (cpu_is_pxa3xx()) {
+		smemc_mmio_base = ioremap(SMEMC_PHYS_BASE, SMEMC_PHYS_SIZE);
+		if (smemc_mmio_base == NULL)
+			return -ENODEV;
+
+		ret = sysdev_class_register(&smemc_sysclass);
+		if (ret)
+			return ret;
+
+		ret = sysdev_register(&smemc_sysdev);
+	}
+
+	return ret;
+}
+subsys_initcall(smemc_init);
+#endif

arch/arm/mach-pxa/spitz.c

@@ -36,6 +36,7 @@
 #include <asm/mach/irq.h>
 
 #include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-regs.h>
 #include <asm/arch/irda.h>
 #include <asm/arch/mmc.h>
 #include <asm/arch/ohci.h>

arch/arm/mach-pxa/tosa.c

@@ -29,6 +29,7 @@
 #include <asm/irq.h>
 #include <asm/system.h>
 #include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-regs.h>
 #include <asm/arch/irda.h>
 #include <asm/arch/mmc.h>
 #include <asm/arch/udc.h>

arch/arm/mach-realview/Kconfig

@@ -7,24 +7,21 @@ config MACH_REALVIEW_EB
 	help
 	  Include support for the ARM(R) RealView Emulation Baseboard platform.
 
-config REALVIEW_MPCORE
-	bool "Support MPcore tile"
+config REALVIEW_EB_ARM11MP
+	bool "Support ARM11MPCore tile"
 	depends on MACH_REALVIEW_EB
 	select CACHE_L2X0
 	help
-	  Enable support for the MPCore tile on the Realview platform.
-	  Since there are device address and interrupt differences, a
-	  kernel built with this option enabled is not compatible with
-	  other tiles.
+	  Enable support for the ARM11MPCore tile on the Realview platform.
 
-config REALVIEW_MPCORE_REVB
-	bool "Support MPcore RevB tile"
-	depends on REALVIEW_MPCORE
+config REALVIEW_EB_ARM11MP_REVB
+	bool "Support ARM11MPCore RevB tile"
+	depends on REALVIEW_EB_ARM11MP
 	default n
 	help
-	  Enable support for the MPCore RevB tile on the Realview platform.
-	  Since there are device address differences, a
+	  Enable support for the ARM11MPCore RevB tile on the Realview
+	  platform. Since there are device address differences, a
 	  kernel built with this option enabled is not compatible with
-	  other tiles.
+	  other revisions of the ARM11MPCore tile.
 
 endmenu

arch/arm/mach-realview/Makefile

@@ -4,6 +4,5 @@
 
 obj-y					:= core.o clock.o
 obj-$(CONFIG_MACH_REALVIEW_EB)		+= realview_eb.o
-obj-$(CONFIG_SMP)			+= platsmp.o headsmp.o
+obj-$(CONFIG_SMP)			+= platsmp.o headsmp.o localtimer.o
 obj-$(CONFIG_HOTPLUG_CPU)		+= hotplug.o
-obj-$(CONFIG_LOCAL_TIMERS)		+= localtimer.o

arch/arm/mach-realview/core.h

@@ -27,8 +27,6 @@
 #include <asm/leds.h>
 #include <asm/io.h>
 
-extern struct sys_timer realview_timer;
-
 #define AMBA_DEVICE(name,busid,base,plat)			\
 static struct amba_device name##_device = {			\
 	.dev		= {					\
@@ -38,7 +36,7 @@ static struct amba_device name##_device = {			\
 	},							\
 	.res		= {					\
 		.start	= REALVIEW_##base##_BASE,		\
-		.end	= (REALVIEW_##base##_BASE) + SZ_4K - 1,\
+		.end	= (REALVIEW_##base##_BASE) + SZ_4K - 1,	\
 		.flags	= IORESOURCE_MEM,			\
 	},							\
 	.dma_mask	= ~0,					\
@@ -46,74 +44,19 @@ static struct amba_device name##_device = {			\
 	/* .dma		= base##_DMA,*/				\
 }
 
-/*
- * These devices are connected via the core APB bridge
- */
-#define GPIO2_IRQ	{ IRQ_GPIOINT2, NO_IRQ }
-#define GPIO2_DMA	{ 0, 0 }
-#define GPIO3_IRQ	{ IRQ_GPIOINT3, NO_IRQ }
-#define GPIO3_DMA	{ 0, 0 }
-
-#define AACI_IRQ	{ IRQ_AACI, NO_IRQ }
-#define AACI_DMA	{ 0x80, 0x81 }
-#define MMCI0_IRQ	{ IRQ_MMCI0A,IRQ_MMCI0B }
-#define MMCI0_DMA	{ 0x84, 0 }
-#define KMI0_IRQ	{ IRQ_KMI0, NO_IRQ }
-#define KMI0_DMA	{ 0, 0 }
-#define KMI1_IRQ	{ IRQ_KMI1, NO_IRQ }
-#define KMI1_DMA	{ 0, 0 }
-
-/*
- * These devices are connected directly to the multi-layer AHB switch
- */
-#define SMC_IRQ		{ NO_IRQ, NO_IRQ }
-#define SMC_DMA		{ 0, 0 }
-#define MPMC_IRQ	{ NO_IRQ, NO_IRQ }
-#define MPMC_DMA	{ 0, 0 }
-#define CLCD_IRQ	{ IRQ_CLCDINT, NO_IRQ }
-#define CLCD_DMA	{ 0, 0 }
-#define DMAC_IRQ	{ IRQ_DMAINT, NO_IRQ }
-#define DMAC_DMA	{ 0, 0 }
-
-/*
- * These devices are connected via the core APB bridge
- */
-#define SCTL_IRQ	{ NO_IRQ, NO_IRQ }
-#define SCTL_DMA	{ 0, 0 }
-#define WATCHDOG_IRQ	{ IRQ_WDOGINT, NO_IRQ }
-#define WATCHDOG_DMA	{ 0, 0 }
-#define GPIO0_IRQ	{ IRQ_GPIOINT0, NO_IRQ }
-#define GPIO0_DMA	{ 0, 0 }
-#define GPIO1_IRQ	{ IRQ_GPIOINT1, NO_IRQ }
-#define GPIO1_DMA	{ 0, 0 }
-#define RTC_IRQ		{ IRQ_RTCINT, NO_IRQ }
-#define RTC_DMA		{ 0, 0 }
-
-/*
- * These devices are connected via the DMA APB bridge
- */
-#define SCI_IRQ		{ IRQ_SCIINT, NO_IRQ }
-#define SCI_DMA		{ 7, 6 }
-#define UART0_IRQ	{ IRQ_UARTINT0, NO_IRQ }
-#define UART0_DMA	{ 15, 14 }
-#define UART1_IRQ	{ IRQ_UARTINT1, NO_IRQ }
-#define UART1_DMA	{ 13, 12 }
-#define UART2_IRQ	{ IRQ_UARTINT2, NO_IRQ }
-#define UART2_DMA	{ 11, 10 }
-#define UART3_IRQ	{ IRQ_UART3, NO_IRQ }
-#define UART3_DMA	{ 0x86, 0x87 }
-#define SSP_IRQ		{ IRQ_SSPINT, NO_IRQ }
-#define SSP_DMA		{ 9, 8 }
-
-
 extern struct platform_device realview_flash_device;
-extern struct platform_device realview_smc91x_device;
 extern struct platform_device realview_i2c_device;
 extern struct mmc_platform_data realview_mmc0_plat_data;
 extern struct mmc_platform_data realview_mmc1_plat_data;
 extern struct clk realview_clcd_clk;
 extern struct clcd_board clcd_plat_data;
+extern void __iomem *gic_cpu_base_addr;
+#ifdef CONFIG_LOCAL_TIMERS
+extern void __iomem *twd_base_addr;
+extern unsigned int twd_size;
+#endif
 
 extern void realview_leds_event(led_event_t ledevt);
+extern void realview_timer_init(unsigned int timer_irq);
 
 #endif