Commit 41579f49 authored by Catalin Marinas's avatar Catalin Marinas Committed by Russell King

[ARM] 4822/1: RealView: Change the REALVIEW_MPCORE configuration option

This patch changes the REALVIEW_MPCORE configuration option to
REALVIEW_EB_ARM11MP since this is only specific to RealView/EB.
Signed-off-by: default avatarCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
parent 39e823e3
......@@ -611,7 +611,7 @@ source "kernel/time/Kconfig"
config SMP
bool "Symmetric Multi-Processing (EXPERIMENTAL)"
depends on EXPERIMENTAL && REALVIEW_MPCORE
depends on EXPERIMENTAL && REALVIEW_EB_ARM11MP
help
This enables support for systems with more than one CPU. If you have
a system with only one CPU, like most personal computers, say N. If
......@@ -645,7 +645,7 @@ config HOTPLUG_CPU
config LOCAL_TIMERS
bool "Use local timer interrupts"
depends on SMP && REALVIEW_MPCORE
depends on SMP && REALVIEW_EB_ARM11MP
default y
help
Enable support for local timers on SMP platforms, rather then the
......
......@@ -7,24 +7,21 @@ config MACH_REALVIEW_EB
help
Include support for the ARM(R) RealView Emulation Baseboard platform.
config REALVIEW_MPCORE
bool "Support MPcore tile"
config REALVIEW_EB_ARM11MP
bool "Support ARM11MPCore tile"
depends on MACH_REALVIEW_EB
select CACHE_L2X0
help
Enable support for the MPCore tile on the Realview platform.
Since there are device address and interrupt differences, a
kernel built with this option enabled is not compatible with
other tiles.
Enable support for the ARM11MPCore tile on the Realview platform.
config REALVIEW_MPCORE_REVB
bool "Support MPcore RevB tile"
depends on REALVIEW_MPCORE
config REALVIEW_EB_ARM11MP_REVB
bool "Support ARM11MPCore RevB tile"
depends on REALVIEW_EB_ARM11MP
default n
help
Enable support for the MPCore RevB tile on the Realview platform.
Since there are device address differences, a
Enable support for the ARM11MPCore RevB tile on the Realview
platform. Since there are device address differences, a
kernel built with this option enabled is not compatible with
other tiles.
other revisions of the ARM11MPCore tile.
endmenu
......@@ -261,7 +261,7 @@ static void __init gic_init_irq(void)
gic_dist_init(0, __io_address(REALVIEW_EB11MP_GIC_DIST_BASE), 29);
gic_cpu_init(0, gic_cpu_base_addr);
#ifndef CONFIG_REALVIEW_MPCORE_REVB
#ifndef CONFIG_REALVIEW_EB_ARM11MP_REVB
/* board GIC, secondary */
gic_dist_init(1, __io_address(REALVIEW_GIC_DIST_BASE), 64);
gic_cpu_init(1, __io_address(REALVIEW_GIC_CPU_BASE));
......
......@@ -26,7 +26,7 @@
/*
* RealView EB + ARM11MPCore peripheral addresses
*/
#ifdef CONFIG_REALVIEW_MPCORE_REVB
#ifdef CONFIG_REALVIEW_EB_ARM11MP_REVB
#define REALVIEW_EB11MP_SCU_BASE 0x10100000 /* SCU registers */
#define REALVIEW_EB11MP_GIC_CPU_BASE 0x10100100 /* Generic interrupt controller CPU interface */
#define REALVIEW_EB11MP_TWD_BASE 0x10100700
......@@ -143,7 +143,7 @@
#define NR_IRQS NR_IRQS_EB
#endif
#if defined(CONFIG_REALVIEW_MPCORE) \
#if defined(CONFIG_REALVIEW_EB_ARM11MP) \
&& (!defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_EB11MP))
#undef MAX_GIC_NR
#define MAX_GIC_NR NR_GIC_EB11MP
......@@ -162,7 +162,7 @@
((readl(__io_address(REALVIEW_SYS_PROCID)) & REALVIEW_EB_PROC_MASK) \
== proc_type)
#ifdef CONFIG_REALVIEW_MPCORE
#ifdef CONFIG_REALVIEW_EB_ARM11MP
#define core_tile_eb11mp() check_eb_proc(REALVIEW_EB_PROC_ARM11MP)
#else
#define core_tile_eb11mp() 0
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment