Commit 0d976313 authored by Thiago Jung Bauermann's avatar Thiago Jung Bauermann Committed by Michael Ellerman

powerpc: Add purgatory for kexec_file_load() implementation.

This purgatory implementation is based on the versions from kexec-tools
and kexec-lite, with additional changes.
Signed-off-by: default avatarThiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
parent a0458284
......@@ -250,6 +250,7 @@ core-y += arch/powerpc/kernel/ \
core-$(CONFIG_XMON) += arch/powerpc/xmon/
core-$(CONFIG_KVM) += arch/powerpc/kvm/
core-$(CONFIG_PERF_EVENTS) += arch/powerpc/perf/
core-$(CONFIG_KEXEC_FILE) += arch/powerpc/purgatory/
drivers-$(CONFIG_OPROFILE) += arch/powerpc/oprofile/
......
......@@ -310,7 +310,7 @@ void default_machine_kexec(struct kimage *image)
if (!kdump_in_progress())
kexec_prepare_cpus();
pr_debug("kexec: Starting switchover sequence.\n");
printk("kexec: Starting switchover sequence.\n");
/* switch to a staticly allocated stack. Based on irq stack code.
* We setup preempt_count to avoid using VMX in memcpy.
......
kexec-purgatory.c
purgatory.ro
targets += trampoline.o purgatory.ro kexec-purgatory.c
LDFLAGS_purgatory.ro := -e purgatory_start -r --no-undefined
$(obj)/purgatory.ro: $(obj)/trampoline.o FORCE
$(call if_changed,ld)
CMD_BIN2C = $(objtree)/scripts/basic/bin2c
quiet_cmd_bin2c = BIN2C $@
cmd_bin2c = $(CMD_BIN2C) kexec_purgatory < $< > $@
$(obj)/kexec-purgatory.c: $(obj)/purgatory.ro FORCE
$(call if_changed,bin2c)
obj-y += kexec-purgatory.o
/*
* kexec trampoline
*
* Based on code taken from kexec-tools and kexec-lite.
*
* Copyright (C) 2004 - 2005, Milton D Miller II, IBM Corporation
* Copyright (C) 2006, Mohan Kumar M, IBM Corporation
* Copyright (C) 2013, Anton Blanchard, IBM Corporation
*
* This program is free software; you can redistribute it and/or modify it under
* the terms of the GNU General Public License as published by the Free
* Software Foundation (version 2 of the License).
*/
#if defined(__LITTLE_ENDIAN__)
#define STWX_BE stwbrx
#define LWZX_BE lwbrx
#elif defined(__BIG_ENDIAN__)
#define STWX_BE stwx
#define LWZX_BE lwzx
#else
#error no endianness defined!
#endif
.machine ppc64
.balign 256
.globl purgatory_start
purgatory_start:
b master
/* ABI: possible run_at_load flag at 0x5c */
.org purgatory_start + 0x5c
.globl run_at_load
run_at_load:
.long 0
.size run_at_load, . - run_at_load
/* ABI: slaves start at 60 with r3=phys */
.org purgatory_start + 0x60
slave:
b .
/* ABI: end of copied region */
.org purgatory_start + 0x100
.size purgatory_start, . - purgatory_start
/*
* The above 0x100 bytes at purgatory_start are replaced with the
* code from the kernel (or next stage) by setup_purgatory().
*/
master:
or %r1,%r1,%r1 /* low priority to let other threads catchup */
isync
mr %r17,%r3 /* save cpu id to r17 */
mr %r15,%r4 /* save physical address in reg15 */
or %r3,%r3,%r3 /* ok now to high priority, lets boot */
lis %r6,0x1
mtctr %r6 /* delay a bit for slaves to catch up */
bdnz . /* before we overwrite 0-100 again */
bl 0f /* Work out where we're running */
0: mflr %r18
/* load device-tree address */
ld %r3, (dt_offset - 0b)(%r18)
mr %r16,%r3 /* save dt address in reg16 */
li %r4,20
LWZX_BE %r6,%r3,%r4 /* fetch __be32 version number at byte 20 */
cmpwi %r0,%r6,2 /* v2 or later? */
blt 1f
li %r4,28
STWX_BE %r17,%r3,%r4 /* Store my cpu as __be32 at byte 28 */
1:
/* load the kernel address */
ld %r4,(kernel - 0b)(%r18)
/* load the run_at_load flag */
/* possibly patched by kexec */
ld %r6,(run_at_load - 0b)(%r18)
/* and patch it into the kernel */
stw %r6,(0x5c)(%r4)
mr %r3,%r16 /* restore dt address */
li %r5,0 /* r5 will be 0 for kernel */
mfmsr %r11
andi. %r10,%r11,1 /* test MSR_LE */
bne .Little_endian
mtctr %r4 /* prepare branch to */
bctr /* start kernel */
.Little_endian:
mtsrr0 %r4 /* prepare branch to */
clrrdi %r11,%r11,1 /* clear MSR_LE */
mtsrr1 %r11
rfid /* update MSR and start kernel */
.balign 8
.globl kernel
kernel:
.llong 0x0
.size kernel, . - kernel
.balign 8
.globl dt_offset
dt_offset:
.llong 0x0
.size dt_offset, . - dt_offset
.data
.balign 8
.globl sha256_digest
sha256_digest:
.skip 32
.size sha256_digest, . - sha256_digest
.balign 8
.globl sha_regions
sha_regions:
.skip 8 * 2 * 16
.size sha_regions, . - sha_regions
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment