usb: phy: samsung: Remove unnecessary lines of register bit definitions

Remove unnecessary lines of register bit definitions in order
to enhance the readability. In this case, there are lines
per register offset definitions. There is no functional change.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

drivers/usb/phy/phy-samsung-usb.h

@@ -21,7 +21,6 @@
 /* Register definitions */
 
 #define SAMSUNG_PHYPWR				(0x00)
-
 #define PHYPWR_NORMAL_MASK			(0x19 << 0)
 #define PHYPWR_OTG_DISABLE			(0x1 << 4)
 #define PHYPWR_ANALOG_POWERDOWN			(0x1 << 3)
@@ -31,7 +30,6 @@
 #define PHYPWR_SLEEP_PHY0			(0x1 << 5)
 
 #define SAMSUNG_PHYCLK				(0x04)
-
 #define PHYCLK_MODE_USB11			(0x1 << 6)
 #define PHYCLK_EXT_OSC				(0x1 << 5)
 #define PHYCLK_COMMON_ON_N			(0x1 << 4)
@@ -42,7 +40,6 @@
 #define PHYCLK_CLKSEL_24M			(0x3 << 0)
 
 #define SAMSUNG_RSTCON				(0x08)
-
 #define RSTCON_PHYLINK_SWRST			(0x1 << 2)
 #define RSTCON_HLINK_SWRST			(0x1 << 1)
 #define RSTCON_SWRST				(0x1 << 0)
@@ -50,26 +47,20 @@
 /* EXYNOS4X12 */
 #define EXYNOS4X12_PHY_HSIC_CTRL0		(0x04)
 #define EXYNOS4X12_PHY_HSIC_CTRL1		(0x08)
-
 #define PHYPWR_NORMAL_MASK_HSIC1		(0x7 << 12)
 #define PHYPWR_NORMAL_MASK_HSIC0		(0x7 << 9)
 #define PHYPWR_NORMAL_MASK_PHY1			(0x7 << 6)
-
 #define RSTCON_HOSTPHY_SWRST			(0xf << 3)
 
 /* EXYNOS5 */
 #define EXYNOS5_PHY_HOST_CTRL0			(0x00)
-
 #define HOST_CTRL0_PHYSWRSTALL			(0x1 << 31)
-
 #define HOST_CTRL0_REFCLKSEL_MASK		(0x3 << 19)
 #define HOST_CTRL0_REFCLKSEL_XTAL		(0x0 << 19)
 #define HOST_CTRL0_REFCLKSEL_EXTL		(0x1 << 19)
 #define HOST_CTRL0_REFCLKSEL_CLKCORE		(0x2 << 19)
-
 #define HOST_CTRL0_FSEL_MASK			(0x7 << 16)
 #define HOST_CTRL0_FSEL(_x)			((_x) << 16)
-
 #define FSEL_CLKSEL_50M				(0x7)
 #define FSEL_CLKSEL_24M				(0x5)
 #define FSEL_CLKSEL_20M				(0x4)
@@ -77,7 +68,6 @@
 #define FSEL_CLKSEL_12M				(0x2)
 #define FSEL_CLKSEL_10M				(0x1)
 #define FSEL_CLKSEL_9600K			(0x0)
-
 #define HOST_CTRL0_TESTBURNIN			(0x1 << 11)
 #define HOST_CTRL0_RETENABLE			(0x1 << 10)
 #define HOST_CTRL0_COMMONON_N			(0x1 << 9)
@@ -98,10 +88,8 @@
 #define EXYNOS5_PHY_HSIC_CTRL2			(0x20)
 
 #define EXYNOS5_PHY_HSIC_TUNE2			(0x24)
-
 #define HSIC_CTRL_REFCLKSEL_MASK		(0x3 << 23)
 #define HSIC_CTRL_REFCLKSEL			(0x2 << 23)
-
 #define HSIC_CTRL_REFCLKDIV_MASK		(0x7f << 16)
 #define HSIC_CTRL_REFCLKDIV(_x)			((_x) << 16)
 #define HSIC_CTRL_REFCLKDIV_12			(0x24 << 16)
@@ -109,7 +97,6 @@
 #define HSIC_CTRL_REFCLKDIV_16			(0x1a << 16)
 #define HSIC_CTRL_REFCLKDIV_19_2		(0x15 << 16)
 #define HSIC_CTRL_REFCLKDIV_20			(0x14 << 16)
-
 #define HSIC_CTRL_SIDDQ				(0x1 << 6)
 #define HSIC_CTRL_FORCESLEEP			(0x1 << 5)
 #define HSIC_CTRL_FORCESUSPEND			(0x1 << 4)
@@ -118,36 +105,29 @@
 #define HSIC_CTRL_PHYSWRST			(0x1 << 0)
 
 #define EXYNOS5_PHY_HOST_EHCICTRL		(0x30)
-
 #define HOST_EHCICTRL_ENAINCRXALIGN		(0x1 << 29)
 #define HOST_EHCICTRL_ENAINCR4			(0x1 << 28)
 #define HOST_EHCICTRL_ENAINCR8			(0x1 << 27)
 #define HOST_EHCICTRL_ENAINCR16			(0x1 << 26)
 
 #define EXYNOS5_PHY_HOST_OHCICTRL		(0x34)
-
 #define HOST_OHCICTRL_SUSPLGCY			(0x1 << 3)
 #define HOST_OHCICTRL_APPSTARTCLK		(0x1 << 2)
 #define HOST_OHCICTRL_CNTSEL			(0x1 << 1)
 #define HOST_OHCICTRL_CLKCKTRST			(0x1 << 0)
 
 #define EXYNOS5_PHY_OTG_SYS			(0x38)
-
 #define OTG_SYS_PHYLINK_SWRESET			(0x1 << 14)
 #define OTG_SYS_LINKSWRST_UOTG			(0x1 << 13)
 #define OTG_SYS_PHY0_SWRST			(0x1 << 12)
-
 #define OTG_SYS_REFCLKSEL_MASK			(0x3 << 9)
 #define OTG_SYS_REFCLKSEL_XTAL			(0x0 << 9)
 #define OTG_SYS_REFCLKSEL_EXTL			(0x1 << 9)
 #define OTG_SYS_REFCLKSEL_CLKCORE		(0x2 << 9)
-
 #define OTG_SYS_IDPULLUP_UOTG			(0x1 << 8)
 #define OTG_SYS_COMMON_ON			(0x1 << 7)
-
 #define OTG_SYS_FSEL_MASK			(0x7 << 4)
 #define OTG_SYS_FSEL(_x)			((_x) << 4)
-
 #define OTG_SYS_FORCESLEEP			(0x1 << 3)
 #define OTG_SYS_OTGDISABLE			(0x1 << 2)
 #define OTG_SYS_SIDDQ_UOTG			(0x1 << 1)
@@ -157,13 +137,11 @@
 
 /* EXYNOS5: USB 3.0 DRD */
 #define EXYNOS5_DRD_LINKSYSTEM			(0x04)
-
 #define LINKSYSTEM_FLADJ_MASK			(0x3f << 1)
 #define LINKSYSTEM_FLADJ(_x)			((_x) << 1)
 #define LINKSYSTEM_XHCI_VERSION_CONTROL		(0x1 << 27)
 
 #define EXYNOS5_DRD_PHYUTMI			(0x08)
-
 #define PHYUTMI_OTGDISABLE			(0x1 << 6)
 #define PHYUTMI_FORCESUSPEND			(0x1 << 1)
 #define PHYUTMI_FORCESLEEP			(0x1 << 0)
@@ -171,68 +149,58 @@
 #define EXYNOS5_DRD_PHYPIPE			(0x0c)
 
 #define EXYNOS5_DRD_PHYCLKRST			(0x10)
-
 #define PHYCLKRST_SSC_REFCLKSEL_MASK		(0xff << 23)
 #define PHYCLKRST_SSC_REFCLKSEL(_x)		((_x) << 23)
-
 #define PHYCLKRST_SSC_RANGE_MASK		(0x03 << 21)
 #define PHYCLKRST_SSC_RANGE(_x)			((_x) << 21)
-
 #define PHYCLKRST_SSC_EN			(0x1 << 20)
 #define PHYCLKRST_REF_SSP_EN			(0x1 << 19)
 #define PHYCLKRST_REF_CLKDIV2			(0x1 << 18)
-
 #define PHYCLKRST_MPLL_MULTIPLIER_MASK		(0x7f << 11)
 #define PHYCLKRST_MPLL_MULTIPLIER_100MHZ_REF	(0x19 << 11)
 #define PHYCLKRST_MPLL_MULTIPLIER_50M_REF	(0x02 << 11)
 #define PHYCLKRST_MPLL_MULTIPLIER_24MHZ_REF	(0x68 << 11)
 #define PHYCLKRST_MPLL_MULTIPLIER_20MHZ_REF	(0x7d << 11)
 #define PHYCLKRST_MPLL_MULTIPLIER_19200KHZ_REF	(0x02 << 11)
-
 #define PHYCLKRST_FSEL_MASK			(0x3f << 5)
 #define PHYCLKRST_FSEL(_x)			((_x) << 5)
 #define PHYCLKRST_FSEL_PAD_100MHZ		(0x27 << 5)
 #define PHYCLKRST_FSEL_PAD_24MHZ		(0x2a << 5)
 #define PHYCLKRST_FSEL_PAD_20MHZ		(0x31 << 5)
 #define PHYCLKRST_FSEL_PAD_19_2MHZ		(0x38 << 5)
-
 #define PHYCLKRST_RETENABLEN			(0x1 << 4)
-
 #define PHYCLKRST_REFCLKSEL_MASK		(0x03 << 2)
 #define PHYCLKRST_REFCLKSEL_PAD_REFCLK		(0x2 << 2)
 #define PHYCLKRST_REFCLKSEL_EXT_REFCLK		(0x3 << 2)
-
 #define PHYCLKRST_PORTRESET			(0x1 << 1)
 #define PHYCLKRST_COMMONONN			(0x1 << 0)
 
 #define EXYNOS5_DRD_PHYREG0			(0x14)
+
 #define EXYNOS5_DRD_PHYREG1			(0x18)
 
 #define EXYNOS5_DRD_PHYPARAM0			(0x1c)
-
 #define PHYPARAM0_REF_USE_PAD			(0x1 << 31)
 #define PHYPARAM0_REF_LOSLEVEL_MASK		(0x1f << 26)
 #define PHYPARAM0_REF_LOSLEVEL			(0x9 << 26)
 
 #define EXYNOS5_DRD_PHYPARAM1			(0x20)
-
 #define PHYPARAM1_PCS_TXDEEMPH_MASK		(0x1f << 0)
 #define PHYPARAM1_PCS_TXDEEMPH			(0x1c)
 
 #define EXYNOS5_DRD_PHYTERM			(0x24)
 
 #define EXYNOS5_DRD_PHYTEST			(0x28)
-
 #define PHYTEST_POWERDOWN_SSP			(0x1 << 3)
 #define PHYTEST_POWERDOWN_HSP			(0x1 << 2)
 
 #define EXYNOS5_DRD_PHYADP			(0x2c)
 
 #define EXYNOS5_DRD_PHYBATCHG			(0x30)
-
 #define PHYBATCHG_UTMI_CLKSEL			(0x1 << 2)
 
 #define EXYNOS5_DRD_PHYRESUME			(0x34)
+
 #define EXYNOS5_DRD_LINKPORT			(0x44)
 
 #ifndef MHZ