drm/amdgpu: Add USBC PD FW load to PSP 11

Add the programming sequence.

v2:
Change donwload wait loop to more efficient.
Move C2PMSG_CMD_GFX_USB_PD_FW_VER defintion

v3: Fix lack of loop counter increment typo

v4: Remove superflous status reg read
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drivers/gpu/drm/amd/amdgpu/psp_gfx_if.h

@@ -31,6 +31,9 @@
 #define GFX_CMD_RESERVED_MASK       0x7FF00000
 #define GFX_CMD_RESPONSE_MASK       0x80000000
 
+/* USBC PD FW version retrieval command */
+#define C2PMSG_CMD_GFX_USB_PD_FW_VER 0x2000000
+
 /* TEE Gfx Command IDs for the register interface.
 *  Command ID must be between 0x00010000 and 0x000F0000.
 */

drivers/gpu/drm/amd/amdgpu/psp_v11_0.c

@@ -65,6 +65,9 @@ MODULE_FIRMWARE("amdgpu/arcturus_ta.bin");
 /* memory training timeout define */
 #define MEM_TRAIN_SEND_MSG_TIMEOUT_US	3000000
 
+/* For large FW files the time to complete can be very long */
+#define USBC_PD_POLLING_LIMIT_S 240
+
 static int psp_v11_0_init_microcode(struct psp_context *psp)
 {
 	struct amdgpu_device *adev = psp->adev;
@@ -1109,6 +1112,82 @@ static void psp_v11_0_ring_set_wptr(struct psp_context *psp, uint32_t value)
 		WREG32_SOC15(MP0, 0, mmMP0_SMN_C2PMSG_67, value);
 }
 
+static int psp_v11_0_load_usbc_pd_fw(struct psp_context *psp, dma_addr_t dma_addr)
+{
+	struct amdgpu_device *adev = psp->adev;
+	uint32_t reg_status;
+	int ret, i = 0;
+
+	/* Write lower 32-bit address of the PD Controller FW */
+	WREG32_SOC15(MP0, 0, mmMP0_SMN_C2PMSG_36, lower_32_bits(dma_addr));
+	ret = psp_wait_for(psp, SOC15_REG_OFFSET(MP0, 0, mmMP0_SMN_C2PMSG_35),
+			     0x80000000, 0x80000000, false);
+	if (ret)
+		return ret;
+
+	/* Fireup interrupt so PSP can pick up the lower address */
+	WREG32_SOC15(MP0, 0, mmMP0_SMN_C2PMSG_35, 0x800000);
+	ret = psp_wait_for(psp, SOC15_REG_OFFSET(MP0, 0, mmMP0_SMN_C2PMSG_35),
+			     0x80000000, 0x80000000, false);
+	if (ret)
+		return ret;
+
+	reg_status = RREG32_SOC15(MP0, 0, mmMP0_SMN_C2PMSG_35);
+
+	if ((reg_status & 0xFFFF) != 0) {
+		DRM_ERROR("Lower address load failed - MP0_SMN_C2PMSG_35.Bits [15:0] = %02x...\n",
+				reg_status & 0xFFFF);
+		return -EIO;
+	}
+
+	/* Write upper 32-bit address of the PD Controller FW */
+	WREG32_SOC15(MP0, 0, mmMP0_SMN_C2PMSG_36, upper_32_bits(dma_addr));
+
+	ret = psp_wait_for(psp, SOC15_REG_OFFSET(MP0, 0, mmMP0_SMN_C2PMSG_35),
+			     0x80000000, 0x80000000, false);
+	if (ret)
+		return ret;
+
+	/* Fireup interrupt so PSP can pick up the upper address */
+	WREG32_SOC15(MP0, 0, mmMP0_SMN_C2PMSG_35, 0x4000000);
+
+	/* FW load takes very long time */
+	do {
+		msleep(1000);
+		reg_status = RREG32_SOC15(MP0, 0, mmMP0_SMN_C2PMSG_35);
+
+		if (reg_status & 0x80000000)
+			goto done;
+
+	} while (++i < USBC_PD_POLLING_LIMIT_S);
+
+	return -ETIME;
+done:
+
+	if ((reg_status & 0xFFFF) != 0) {
+		DRM_ERROR("Upper address load failed - MP0_SMN_C2PMSG_35.Bits [15:0] = x%04x\n",
+				reg_status & 0xFFFF);
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int psp_v11_0_read_usbc_pd_fw(struct psp_context *psp, uint32_t *fw_ver)
+{
+	struct amdgpu_device *adev = psp->adev;
+	int ret;
+
+	WREG32_SOC15(MP0, 0, mmMP0_SMN_C2PMSG_35, C2PMSG_CMD_GFX_USB_PD_FW_VER);
+
+	ret = psp_wait_for(psp, SOC15_REG_OFFSET(MP0, 0, mmMP0_SMN_C2PMSG_35),
+				     0x80000000, 0x80000000, false);
+	if (!ret)
+		*fw_ver = RREG32_SOC15(MP0, 0, mmMP0_SMN_C2PMSG_36);
+
+	return ret;
+}
+
 static const struct psp_funcs psp_v11_0_funcs = {
 	.init_microcode = psp_v11_0_init_microcode,
 	.bootloader_load_kdb = psp_v11_0_bootloader_load_kdb,
@@ -1133,6 +1212,8 @@ static const struct psp_funcs psp_v11_0_funcs = {
 	.mem_training = psp_v11_0_memory_training,
 	.ring_get_wptr = psp_v11_0_ring_get_wptr,
 	.ring_set_wptr = psp_v11_0_ring_set_wptr,
+	.load_usbc_pd_fw = psp_v11_0_load_usbc_pd_fw,
+	.read_usbc_pd_fw = psp_v11_0_read_usbc_pd_fw
 };
 
 void psp_v11_0_set_psp_funcs(struct psp_context *psp)