mt76: move interface_modes definition in mt76_core module

Move interface modes declaration in common code since now mt76
chipsets support all modes (NL80211_IFTYPE_STATION, NL80211_IFTYPE_AP,
NL80211_IFTYPE_MESH_POINT and NL80211_IFTYPE_ADHOC)
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

drivers/net/wireless/mediatek/mt76/mac80211.c

@@ -340,6 +340,13 @@ int mt76_register_device(struct mt76_dev *dev, bool vht,
 	ieee80211_hw_set(hw, SUPPORTS_REORDERING_BUFFER);
 
 	wiphy->flags |= WIPHY_FLAG_IBSS_RSN;
+	wiphy->interface_modes =
+		BIT(NL80211_IFTYPE_STATION) |
+		BIT(NL80211_IFTYPE_AP) |
+#ifdef CONFIG_MAC80211_MESH
+		BIT(NL80211_IFTYPE_MESH_POINT) |
+#endif
+		BIT(NL80211_IFTYPE_ADHOC);
 
 	if (dev->cap.has_2ghz) {
 		ret = mt76_init_sband_2g(dev, rates, n_rates);

drivers/net/wireless/mediatek/mt76/mt7603/init.c

@@ -564,16 +564,7 @@ int mt7603_register_device(struct mt7603_dev *dev)
 		dev->mt76.led_cdev.blink_set = mt7603_led_set_blink;
 	}
 
-	wiphy->interface_modes =
-		BIT(NL80211_IFTYPE_STATION) |
-		BIT(NL80211_IFTYPE_AP) |
-#ifdef CONFIG_MAC80211_MESH
-		BIT(NL80211_IFTYPE_MESH_POINT) |
-#endif
-		BIT(NL80211_IFTYPE_ADHOC);
-
 	wiphy->flags |= WIPHY_FLAG_HAS_CHANNEL_SWITCH;
-
 	wiphy->reg_notifier = mt7603_regd_notifier;
 
 	ret = mt76_register_device(&dev->mt76, true, mt7603_rates,

drivers/net/wireless/mediatek/mt76/mt7615/init.c

@@ -307,13 +307,6 @@ int mt7615_register_device(struct mt7615_dev *dev)
 	dev->mt76.antenna_mask = 0xf;
 	dev->dfs_state = -1;
 
-	wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) |
-				 BIT(NL80211_IFTYPE_ADHOC) |
-#ifdef CONFIG_MAC80211_MESH
-				 BIT(NL80211_IFTYPE_MESH_POINT) |
-#endif
-				 BIT(NL80211_IFTYPE_AP);
-
 	ret = mt76_register_device(&dev->mt76, true, mt7615_rates,
 				   ARRAY_SIZE(mt7615_rates));
 	if (ret)

drivers/net/wireless/mediatek/mt76/mt76x02_util.c

@@ -153,14 +153,6 @@ void mt76x02_init_device(struct mt76x02_dev *dev)
 	hw->max_rate_tries = 1;
 	hw->extra_tx_headroom = 2;
 
-	wiphy->interface_modes =
-		BIT(NL80211_IFTYPE_STATION) |
-		BIT(NL80211_IFTYPE_AP) |
-#ifdef CONFIG_MAC80211_MESH
-		BIT(NL80211_IFTYPE_MESH_POINT) |
-#endif
-		BIT(NL80211_IFTYPE_ADHOC);
-
 	if (mt76_is_usb(&dev->mt76)) {
 		hw->extra_tx_headroom += sizeof(struct mt76x02_txwi) +
 					 MT_DMA_HDR_LEN;