Commit 0ed0b22d authored by Antti Palosaari's avatar Antti Palosaari Committed by Mauro Carvalho Chehab

[media] e4000: fix PLL calc to allow higher frequencies

There was 32-bit overflow on VCO frequency calculation which blocks
tuning to 1073 - 1104 MHz. Use 64 bit number in order to avoid VCO
frequency overflow.

After that fix device in question tunes to following range:
60 - 1104 MHz
1250 - 2207 MHz
Signed-off-by: default avatarAntti Palosaari <crope@iki.fi>
Signed-off-by: default avatarMauro Carvalho Chehab <m.chehab@samsung.com>
parent adaa616f
......@@ -221,11 +221,11 @@ static int e4000_set_params(struct dvb_frontend *fe)
struct e4000_priv *priv = fe->tuner_priv;
struct dtv_frontend_properties *c = &fe->dtv_property_cache;
int ret, i, sigma_delta;
unsigned int f_vco;
u64 f_vco;
u8 buf[5], i_data[4], q_data[4];
dev_dbg(&priv->client->dev,
"%s: delivery_system=%d frequency=%d bandwidth_hz=%d\n",
"%s: delivery_system=%d frequency=%u bandwidth_hz=%u\n",
__func__, c->delivery_system, c->frequency,
c->bandwidth_hz);
......@@ -248,20 +248,16 @@ static int e4000_set_params(struct dvb_frontend *fe)
goto err;
}
/*
* Note: Currently f_vco overflows when c->frequency is 1 073 741 824 Hz
* or more.
*/
f_vco = c->frequency * e4000_pll_lut[i].mul;
f_vco = 1ull * c->frequency * e4000_pll_lut[i].mul;
sigma_delta = div_u64(0x10000ULL * (f_vco % priv->clock), priv->clock);
buf[0] = f_vco / priv->clock;
buf[0] = div_u64(f_vco, priv->clock);
buf[1] = (sigma_delta >> 0) & 0xff;
buf[2] = (sigma_delta >> 8) & 0xff;
buf[3] = 0x00;
buf[4] = e4000_pll_lut[i].div;
dev_dbg(&priv->client->dev,
"%s: f_vco=%u pll div=%d sigma_delta=%04x\n",
"%s: f_vco=%llu pll div=%d sigma_delta=%04x\n",
__func__, f_vco, buf[0], sigma_delta);
ret = e4000_wr_regs(priv, 0x09, buf, 5);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment