drm/vc4: hdmi: Fix timings for interlaced modes

Increase the number of post-sync blanking lines on odd fields instead of
decreasing it on even fields. This makes the total number of lines
properly match the modelines.

Additionally fix the value of PV_VCONTROL_ODD_DELAY, which did not take
pixels_per_clock into account, causing some displays to invert the
fields when driven by bcm2711.

Fixes: 682e62c4 ("drm/vc4: Fix support for interlaced modes on HDMI.")
Signed-off-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Link: https://lore.kernel.org/r/20220613144800.326124-31-maxime@cerno.techSigned-off-by: Maxime Ripard <maxime@cerno.tech>

drivers/gpu/drm/vc4/vc4_crtc.c

@@ -347,7 +347,8 @@ static void vc4_crtc_config_pv(struct drm_crtc *crtc, struct drm_encoder *encode
 				 PV_HORZB_HACTIVE));
 
 	CRTC_WRITE(PV_VERTA,
-		   VC4_SET_FIELD(mode->crtc_vtotal - mode->crtc_vsync_end,
+		   VC4_SET_FIELD(mode->crtc_vtotal - mode->crtc_vsync_end +
+				 interlace,
 				 PV_VERTA_VBP) |
 		   VC4_SET_FIELD(mode->crtc_vsync_end - mode->crtc_vsync_start,
 				 PV_VERTA_VSYNC));
@@ -359,7 +360,7 @@ static void vc4_crtc_config_pv(struct drm_crtc *crtc, struct drm_encoder *encode
 	if (interlace) {
 		CRTC_WRITE(PV_VERTA_EVEN,
 			   VC4_SET_FIELD(mode->crtc_vtotal -
-					 mode->crtc_vsync_end - 1,
+					 mode->crtc_vsync_end,
 					 PV_VERTA_VBP) |
 			   VC4_SET_FIELD(mode->crtc_vsync_end -
 					 mode->crtc_vsync_start,
@@ -379,7 +380,7 @@ static void vc4_crtc_config_pv(struct drm_crtc *crtc, struct drm_encoder *encode
 			   PV_VCONTROL_CONTINUOUS |
 			   (is_dsi ? PV_VCONTROL_DSI : 0) |
 			   PV_VCONTROL_INTERLACE |
-			   VC4_SET_FIELD(mode->htotal * pixel_rep / 2,
+			   VC4_SET_FIELD(mode->htotal * pixel_rep / (2 * ppc),
 					 PV_VCONTROL_ODD_DELAY));
 		CRTC_WRITE(PV_VSYNCD_EVEN, 0);
 	} else {

drivers/gpu/drm/vc4/vc4_hdmi.c

@@ -984,12 +984,12 @@ static void vc4_hdmi_set_timings(struct vc4_hdmi *vc4_hdmi,
 				   VC4_HDMI_VERTA_VFP) |
 		     VC4_SET_FIELD(mode->crtc_vdisplay, VC4_HDMI_VERTA_VAL));
 	u32 vertb = (VC4_SET_FIELD(0, VC4_HDMI_VERTB_VSPO) |
-		     VC4_SET_FIELD(mode->crtc_vtotal - mode->crtc_vsync_end,
+		     VC4_SET_FIELD(mode->crtc_vtotal - mode->crtc_vsync_end +
+				   interlaced,
 				   VC4_HDMI_VERTB_VBP));
 	u32 vertb_even = (VC4_SET_FIELD(0, VC4_HDMI_VERTB_VSPO) |
 			  VC4_SET_FIELD(mode->crtc_vtotal -
-					mode->crtc_vsync_end -
-					interlaced,
+					mode->crtc_vsync_end,
 					VC4_HDMI_VERTB_VBP));
 	unsigned long flags;
 
@@ -1037,12 +1037,12 @@ static void vc5_hdmi_set_timings(struct vc4_hdmi *vc4_hdmi,
 				   VC5_HDMI_VERTA_VFP) |
 		     VC4_SET_FIELD(mode->crtc_vdisplay, VC5_HDMI_VERTA_VAL));
 	u32 vertb = (VC4_SET_FIELD(0, VC5_HDMI_VERTB_VSPO) |
-		     VC4_SET_FIELD(mode->crtc_vtotal - mode->crtc_vsync_end,
+		     VC4_SET_FIELD(mode->crtc_vtotal - mode->crtc_vsync_end +
+				   interlaced,
 				   VC4_HDMI_VERTB_VBP));
 	u32 vertb_even = (VC4_SET_FIELD(0, VC5_HDMI_VERTB_VSPO) |
 			  VC4_SET_FIELD(mode->crtc_vtotal -
-					mode->crtc_vsync_end -
-					interlaced,
+					mode->crtc_vsync_end,
 					VC4_HDMI_VERTB_VBP));
 	unsigned long flags;
 	unsigned char gcp;