Commit 0f18f767 authored by Mark Einon's avatar Mark Einon Committed by Greg Kroah-Hartman

staging: et131x: Use phy-device, mii_bus and ethtool_ops

Adding some basic ethtool ops and supporting functionality using a phy device.
Signed-off-by: default avatarMark Einon <mark.einon@gmail.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent fca7737f
......@@ -11,5 +11,6 @@ et131x-y := et1310_eeprom.o \
et1310_rx.o \
et1310_tx.o \
et131x_initpci.o \
et131x_ethtool.o \
et131x_isr.o \
et131x_netdev.o
/*
* Agere Systems Inc.
* 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs
* 10/100/1000 Base-T Ethernet Driver for the ET1310 and ET131x series MACs
*
* Copyright * 2005 Agere Systems Inc.
* All rights reserved.
......@@ -82,6 +82,7 @@
#include <linux/if_arp.h>
#include <linux/ioport.h>
#include <linux/random.h>
#include <linux/phy.h>
#include "et1310_phy.h"
......@@ -93,6 +94,40 @@
#include "et131x.h"
int et131x_mdio_read(struct mii_bus *bus, int phy_addr, int reg)
{
struct net_device *netdev = bus->priv;
struct et131x_adapter *adapter = netdev_priv(netdev);
u16 value;
int ret;
ret = et131x_phy_mii_read(adapter, phy_addr, reg, &value);
if (ret < 0)
return ret;
else
return value;
}
int et131x_mdio_write(struct mii_bus *bus, int phy_addr, int reg, u16 value)
{
struct net_device *netdev = bus->priv;
struct et131x_adapter *adapter = netdev_priv(netdev);
/* mii_write always uses the same phy_addr, xcvr_addr */
return et131x_mii_write(adapter, reg, value);
}
int et131x_mdio_reset(struct mii_bus *bus)
{
struct net_device *netdev = bus->priv;
struct et131x_adapter *adapter = netdev_priv(netdev);
et1310_phy_reset(adapter);
return 0;
}
/**
* et131x_phy_mii_read - Read from the PHY through the MII Interface on the MAC
* @adapter: pointer to our private adapter structure
......@@ -107,7 +142,7 @@ int et131x_phy_mii_read(struct et131x_adapter *adapter, u8 xcvr_addr,
{
struct mac_regs __iomem *mac = &adapter->regs->mac;
int status = 0;
u32 delay;
u32 delay = 0;
u32 mii_addr;
u32 mii_cmd;
u32 mii_indicator;
......@@ -124,9 +159,6 @@ int et131x_phy_mii_read(struct et131x_adapter *adapter, u8 xcvr_addr,
/* Set up the register we need to read from on the correct PHY */
writel(MII_ADDR(xcvr_addr, xcvr_reg), &mac->mii_mgmt_addr);
/* Kick the read cycle off */
delay = 0;
writel(0x1, &mac->mii_mgmt_cmd);
do {
......@@ -176,7 +208,7 @@ int et131x_mii_write(struct et131x_adapter *adapter, u8 xcvr_reg, u16 value)
struct mac_regs __iomem *mac = &adapter->regs->mac;
int status = 0;
u8 xcvr_addr = adapter->stats.xcvr_addr;
u32 delay;
u32 delay = 0;
u32 mii_addr;
u32 mii_cmd;
u32 mii_indicator;
......@@ -195,7 +227,6 @@ int et131x_mii_write(struct et131x_adapter *adapter, u8 xcvr_reg, u16 value)
/* Add the value to write to the registers to the mac */
writel(value, &mac->mii_mgmt_ctrl);
delay = 0;
do {
udelay(50);
......
......@@ -121,8 +121,8 @@ struct mi_regs {
u8 imr; /* Interrupt Mask Reg(Reg 0x18) */
u8 isr; /* Interrupt Status Reg(Reg 0x19) */
u8 psr; /* PHY Status Reg(Reg 0x1A) */
u8 lcr1; /* LED Control 1 Reg(Reg 0x1B) */
u8 lcr2; /* LED Control 2 Reg(Reg 0x1C) */
u8 lcr1; /* LED Control 1 Reg(Reg 0x1B) */
u8 lcr2; /* LED Control 2 Reg(Reg 0x1C) */
u8 mi_res4[3]; /* Future use by MI working group(Reg 0x1D - 0x1F) */
};
......
......@@ -116,6 +116,10 @@ int32_t et131x_mii_write(struct et131x_adapter *adapter,
void et131x_mii_check(struct et131x_adapter *pAdapter,
u16 bmsr, u16 bmsr_ints);
int et131x_mdio_read(struct mii_bus *bus, int phy_addr, int reg);
int et131x_mdio_write(struct mii_bus *bus, int phy_addr, int reg, u16 value);
int et131x_mdio_reset(struct mii_bus *bus);
/* et1310_rx.c */
int et131x_rx_dma_memory_alloc(struct et131x_adapter *adapter);
void et131x_rx_dma_memory_free(struct et131x_adapter *adapter);
......@@ -145,3 +149,5 @@ void et131x_handle_send_interrupt(struct et131x_adapter *adapter);
void et131x_free_busy_send_packets(struct et131x_adapter *adapter);
int et131x_send_packets(struct sk_buff *skb, struct net_device *netdev);
/* et131x_ethtool.c */
void et131x_set_ethtool_ops(struct net_device *netdev);
......@@ -144,7 +144,8 @@ struct ce_stats {
struct et131x_adapter {
struct net_device *netdev;
struct pci_dev *pdev;
struct mii_bus *mii_bus;
struct phy_device *phydev;
struct work_struct task;
/* Flags that indicate current state of the adapter */
......
/*
* Copyright (C) 2011 Mark Einon
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
* Mark Einon <mark.einon@gmail.com>
*/
#include "et131x_version.h"
#include "et131x_defs.h"
#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/netdevice.h>
#include <linux/ethtool.h>
#include <linux/phy.h>
#include <linux/pci.h>
#include "et131x_adapter.h"
#include "et131x.h"
static int et131x_get_settings(struct net_device *netdev,
struct ethtool_cmd *cmd)
{
struct et131x_adapter *adapter = netdev_priv(netdev);
return phy_ethtool_gset(adapter->phydev, cmd);
}
static int et131x_set_settings(struct net_device *netdev,
struct ethtool_cmd *cmd)
{
struct et131x_adapter *adapter = netdev_priv(netdev);
return phy_ethtool_sset(adapter->phydev, cmd);
}
#define ET131X_DRVINFO_LEN 32 /* value from ethtool.h */
static void et131x_get_drvinfo(struct net_device *netdev,
struct ethtool_drvinfo *info)
{
struct et131x_adapter *adapter = netdev_priv(netdev);
strncpy(info->driver, DRIVER_NAME, ET131X_DRVINFO_LEN);
strncpy(info->version, DRIVER_VERSION_STRING, ET131X_DRVINFO_LEN);
strncpy(info->bus_info, pci_name(adapter->pdev), ET131X_DRVINFO_LEN);
}
static struct ethtool_ops et131x_ethtool_ops = {
.get_settings = et131x_get_settings,
.set_settings = et131x_set_settings,
.get_drvinfo = et131x_get_drvinfo,
.get_link = ethtool_op_get_link,
};
void et131x_set_ethtool_ops(struct net_device *netdev)
{
SET_ETHTOOL_OPS(netdev, &et131x_ethtool_ops);
}
......@@ -80,6 +80,7 @@
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/phy.h>
#include <linux/skbuff.h>
#include <linux/if_arp.h>
#include <linux/ioport.h>
......@@ -329,7 +330,7 @@ void et131x_configure_global_regs(struct et131x_adapter *adapter)
*/
int et131x_adapter_setup(struct et131x_adapter *adapter)
{
int status = 0;
int status;
/* Configure the JAGCore */
et131x_configure_global_regs(adapter);
......@@ -351,7 +352,7 @@ int et131x_adapter_setup(struct et131x_adapter *adapter)
/* Move the following code to Timer function?? */
status = et131x_xcvr_find(adapter);
if (status != 0)
if (status)
dev_warn(&adapter->pdev->dev, "Could not find the xcvr\n");
/* Prepare the TRUEPHY library. */
......@@ -471,6 +472,80 @@ void et131x_adapter_memory_free(struct et131x_adapter *adapter)
et131x_rx_dma_memory_free(adapter);
}
static void et131x_adjust_link(struct net_device *netdev)
{
struct et131x_adapter *adapter = netdev_priv(netdev);
struct phy_device *phydev = adapter->phydev;
struct address_map __iomem *iomem = adapter->regs;
u32 pm_csr;
u16 bmsr_ints;
u16 bmsr_data;
/* If we are in coma mode, we need to disable it. */
pm_csr = readl(&iomem->global.pm_csr);
if (pm_csr & ET_PM_PHY_SW_COMA) {
/*
* Check to see if we are in coma mode and if
* so, disable it because we will not be able
* to read PHY values until we are out.
*/
et1310_disable_phy_coma(adapter);
}
et131x_mii_read(adapter,
(uint8_t) offsetof(struct mi_regs, bmsr),
&bmsr_data);
bmsr_ints = adapter->bmsr ^ bmsr_data;
adapter->bmsr = bmsr_data;
/* Do all the cable in / cable out stuff */
et131x_mii_check(adapter, bmsr_data, bmsr_ints);
phy_print_status(phydev);
}
int et131x_mii_probe(struct net_device *netdev)
{
struct et131x_adapter *adapter = netdev_priv(netdev);
struct phy_device *phydev = NULL;
phydev = phy_find_first(adapter->mii_bus);
if (!phydev) {
dev_err(&adapter->pdev->dev, "no PHY found\n");
return -ENODEV;
}
phydev = phy_connect(netdev, dev_name(&phydev->dev),
&et131x_adjust_link, 0, PHY_INTERFACE_MODE_MII);
if(IS_ERR(phydev)) {
dev_err(&adapter->pdev->dev, "Could not attach to PHY\n");
return PTR_ERR(phydev);
}
phydev->supported &= (SUPPORTED_10baseT_Half
| SUPPORTED_10baseT_Full
| SUPPORTED_100baseT_Half
| SUPPORTED_100baseT_Full
| SUPPORTED_Autoneg
| SUPPORTED_MII
| SUPPORTED_TP);
if (adapter->pdev->device != ET131X_PCI_DEVICE_ID_FAST)
phydev->supported |= SUPPORTED_1000baseT_Full;
phydev->advertising = phydev->supported;
adapter->phydev = phydev;
dev_info(&adapter->pdev->dev, "attached PHY driver [%s] "
"(mii_bus:phy_addr=%s)\n",
phydev->drv->name, dev_name(&phydev->dev));
return 0;
}
/**
* et131x_adapter_init
* @adapter: pointer to the private adapter struct
......@@ -538,8 +613,8 @@ static int __devinit et131x_pci_setup(struct pci_dev *pdev,
int pm_cap;
struct net_device *netdev;
struct et131x_adapter *adapter;
int ii;
/* Enable the device via the PCI subsystem */
result = pci_enable_device(pdev);
if (result) {
dev_err(&pdev->dev, "pci_enable_device() failed\n");
......@@ -602,8 +677,10 @@ static int __devinit et131x_pci_setup(struct pci_dev *pdev,
}
SET_NETDEV_DEV(netdev, &pdev->dev);
et131x_set_ethtool_ops(netdev);
adapter = et131x_adapter_init(netdev, pdev);
/* Initialise the PCI setup for the device */
et131x_pci_init(adapter, pdev);
......@@ -650,11 +727,43 @@ static int __devinit et131x_pci_setup(struct pci_dev *pdev,
adapter->error_timer.function = et131x_error_timer_handler;
adapter->error_timer.data = (unsigned long)adapter;
/* Initialize link state */
netif_carrier_off(adapter->netdev);
/* Init variable for counting how long we do not have link status */
adapter->boot_coma = 0;
et1310_disable_phy_coma(adapter);
/* Setup the mii_bus struct */
adapter->mii_bus = mdiobus_alloc();
if (!adapter->mii_bus) {
dev_err(&pdev->dev, "Alloc of mii_bus struct failed\n");
goto err_mem_free;
}
adapter->mii_bus->name = "et131x_eth_mii";
snprintf(adapter->mii_bus->id, MII_BUS_ID_SIZE, "%x",
(adapter->pdev->bus->number << 8) | adapter->pdev->devfn);
adapter->mii_bus->priv = netdev;
adapter->mii_bus->read = et131x_mdio_read;
adapter->mii_bus->write = et131x_mdio_write;
adapter->mii_bus->reset = et131x_mdio_reset;
adapter->mii_bus->irq = kmalloc(sizeof(int)*PHY_MAX_ADDR, GFP_KERNEL);
if (!adapter->mii_bus->irq) {
dev_err(&pdev->dev, "mii_bus irq allocation failed\n");
goto err_mdio_free;
}
for (ii = 0; ii < PHY_MAX_ADDR; ii++)
adapter->mii_bus->irq[ii] = PHY_POLL;
if (mdiobus_register(adapter->mii_bus)) {
dev_err(&pdev->dev, "failed to register MII bus\n");
mdiobus_free(adapter->mii_bus);
goto err_mdio_free_irq;
}
if (et131x_mii_probe(netdev)) {
dev_err(&pdev->dev, "failed to probe MII bus\n");
goto err_mdio_unregister;
}
/* We can enable interrupts now
*
......@@ -667,7 +776,7 @@ static int __devinit et131x_pci_setup(struct pci_dev *pdev,
result = register_netdev(netdev);
if (result != 0) {
dev_err(&pdev->dev, "register_netdev() failed\n");
goto err_mem_free;
goto err_mdio_unregister;
}
/* Register the net_device struct with the PCI subsystem. Save a copy
......@@ -679,6 +788,12 @@ static int __devinit et131x_pci_setup(struct pci_dev *pdev,
return result;
err_mdio_unregister:
mdiobus_unregister(adapter->mii_bus);
err_mdio_free_irq:
kfree(adapter->mii_bus->irq);
err_mdio_free:
mdiobus_free(adapter->mii_bus);
err_mem_free:
et131x_adapter_memory_free(adapter);
err_iounmap:
......@@ -704,20 +819,18 @@ static int __devinit et131x_pci_setup(struct pci_dev *pdev,
*/
static void __devexit et131x_pci_remove(struct pci_dev *pdev)
{
struct net_device *netdev;
struct et131x_adapter *adapter;
struct net_device *netdev = pci_get_drvdata(pdev);
struct et131x_adapter *adapter = netdev_priv(netdev);
/* Retrieve the net_device pointer from the pci_dev struct, as well
* as the private adapter struct
*/
netdev = pci_get_drvdata(pdev);
adapter = netdev_priv(netdev);
/* Perform device cleanup */
unregister_netdev(netdev);
mdiobus_unregister(adapter->mii_bus);
kfree(adapter->mii_bus->irq);
mdiobus_free(adapter->mii_bus);
et131x_adapter_memory_free(adapter);
iounmap(adapter->regs);
pci_dev_put(adapter->pdev);
pci_dev_put(pdev);
free_netdev(netdev);
pci_release_regions(pdev);
pci_disable_device(pdev);
......
/*
* Agere Systems Inc.
* 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs
* 10/100/1000 Base-T Ethernet Driver for the ET1310 and ET131x series MACs
*
* Copyright © 2005 Agere Systems Inc.
* All rights reserved.
......@@ -82,6 +82,7 @@
#include <linux/skbuff.h>
#include <linux/if_arp.h>
#include <linux/ioport.h>
#include <linux/phy.h>
#include "et1310_phy.h"
#include "et1310_tx.h"
......@@ -167,6 +168,8 @@ int et131x_open(struct net_device *netdev)
adapter->flags |= fMP_ADAPTER_INTERRUPT_IN_USE;
phy_start(adapter->phydev);
/* We're ready to move some data, so start the queue */
netif_start_queue(netdev);
return result;
......@@ -699,8 +702,6 @@ struct net_device *et131x_device_alloc(void)
netdev->watchdog_timeo = ET131X_TX_TIMEOUT;
netdev->netdev_ops = &et131x_netdev_ops;
/* netdev->ethtool_ops = &et131x_ethtool_ops; */
/* Poll? */
/* netdev->poll = &et131x_poll; */
/* netdev->poll_controller = &et131x_poll_controller; */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment