Skip to content

L
linux
Commit 0f2c7af4 authored by Fabio Estevam's avatar Fabio Estevam Committed by Linus Walleij
Browse files
Options

gpio: mxc: Convert the driver to DT-only 

Since 5.10-rc1 i.MX is a devicetree-only platform, so simplify the code
by removing the unused non-DT support.
Signed-off-by: default avatarFabio Estevam <festevam@gmail.com>
Reviewed-by: default avatarAndy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20201117105917.27591-1-festevam@gmail.comSigned-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
parent 8b516583
Hide whitespace changes
Inline Side-by-side
Showing with 22 additions and 80 deletions
drivers/gpio/gpio-mxc.c
View file @ 0f2c7af4
......@@ -24,13 +24,6 @@
#include <linux/of_device.h>
#include <linux/bug.h>
enum mxc_gpio_hwtype {
IMX1_GPIO, /* runs on i.mx1 */
IMX21_GPIO, /* runs on i.mx21 and i.mx27 */
IMX31_GPIO, /* runs on i.mx31 */
IMX35_GPIO, /* runs on all other i.mx */
};
/* device type dependent stuff */
struct mxc_gpio_hwdata {
unsigned dr_reg;
......@@ -68,6 +61,7 @@ struct mxc_gpio_port {
u32 both_edges;
struct mxc_gpio_reg_saved gpio_saved_reg;
bool power_off;
const struct mxc_gpio_hwdata *hwdata;
};
static struct mxc_gpio_hwdata imx1_imx21_gpio_hwdata = {
......@@ -115,48 +109,27 @@ static struct mxc_gpio_hwdata imx35_gpio_hwdata = {
.fall_edge = 0x03,
};
static enum mxc_gpio_hwtype mxc_gpio_hwtype;
static struct mxc_gpio_hwdata *mxc_gpio_hwdata;
#define GPIO_DR (mxc_gpio_hwdata->dr_reg)
#define GPIO_GDIR (mxc_gpio_hwdata->gdir_reg)
#define GPIO_PSR (mxc_gpio_hwdata->psr_reg)
#define GPIO_ICR1 (mxc_gpio_hwdata->icr1_reg)
#define GPIO_ICR2 (mxc_gpio_hwdata->icr2_reg)
#define GPIO_IMR (mxc_gpio_hwdata->imr_reg)
#define GPIO_ISR (mxc_gpio_hwdata->isr_reg)
#define GPIO_EDGE_SEL (mxc_gpio_hwdata->edge_sel_reg)
#define GPIO_INT_LOW_LEV (mxc_gpio_hwdata->low_level)
#define GPIO_INT_HIGH_LEV (mxc_gpio_hwdata->high_level)
#define GPIO_INT_RISE_EDGE (mxc_gpio_hwdata->rise_edge)
#define GPIO_INT_FALL_EDGE (mxc_gpio_hwdata->fall_edge)
#define GPIO_DR (port->hwdata->dr_reg)
#define GPIO_GDIR (port->hwdata->gdir_reg)
#define GPIO_PSR (port->hwdata->psr_reg)
#define GPIO_ICR1 (port->hwdata->icr1_reg)
#define GPIO_ICR2 (port->hwdata->icr2_reg)
#define GPIO_IMR (port->hwdata->imr_reg)
#define GPIO_ISR (port->hwdata->isr_reg)
#define GPIO_EDGE_SEL (port->hwdata->edge_sel_reg)
#define GPIO_INT_LOW_LEV (port->hwdata->low_level)
#define GPIO_INT_HIGH_LEV (port->hwdata->high_level)
#define GPIO_INT_RISE_EDGE (port->hwdata->rise_edge)
#define GPIO_INT_FALL_EDGE (port->hwdata->fall_edge)
#define GPIO_INT_BOTH_EDGES 0x4
static const struct platform_device_id mxc_gpio_devtype[] = {
{
.name = "imx1-gpio",
.driver_data = IMX1_GPIO,
}, {
.name = "imx21-gpio",
.driver_data = IMX21_GPIO,
}, {
.name = "imx31-gpio",
.driver_data = IMX31_GPIO,
}, {
.name = "imx35-gpio",
.driver_data = IMX35_GPIO,
}, {
/* sentinel */
}
};
static const struct of_device_id mxc_gpio_dt_ids[] = {
{ .compatible = "fsl,imx1-gpio", .data = &mxc_gpio_devtype[IMX1_GPIO], },
{ .compatible = "fsl,imx21-gpio", .data = &mxc_gpio_devtype[IMX21_GPIO], },
{ .compatible = "fsl,imx31-gpio", .data = &mxc_gpio_devtype[IMX31_GPIO], },
{ .compatible = "fsl,imx35-gpio", .data = &mxc_gpio_devtype[IMX35_GPIO], },
{ .compatible = "fsl,imx7d-gpio", .data = &mxc_gpio_devtype[IMX35_GPIO], },
{ .compatible = "fsl,imx1-gpio", .data = &imx1_imx21_gpio_hwdata },
{ .compatible = "fsl,imx21-gpio", .data = &imx1_imx21_gpio_hwdata },
{ .compatible = "fsl,imx31-gpio", .data = &imx31_gpio_hwdata },
{ .compatible = "fsl,imx35-gpio", .data = &imx35_gpio_hwdata },
{ .compatible = "fsl,imx7d-gpio", .data = &imx35_gpio_hwdata },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, mxc_gpio_dt_ids);
......@@ -372,36 +345,6 @@ static int mxc_gpio_init_gc(struct mxc_gpio_port *port, int irq_base)
return rv;
}
static void mxc_gpio_get_hw(struct platform_device *pdev)
{
const struct of_device_id *of_id =
of_match_device(mxc_gpio_dt_ids, &pdev->dev);
enum mxc_gpio_hwtype hwtype;
if (of_id)
pdev->id_entry = of_id->data;
hwtype = pdev->id_entry->driver_data;
if (mxc_gpio_hwtype) {
/*
* The driver works with a reasonable presupposition,
* that is all gpio ports must be the same type when
* running on one soc.
*/
BUG_ON(mxc_gpio_hwtype != hwtype);
return;
}
if (hwtype == IMX35_GPIO)
mxc_gpio_hwdata = &imx35_gpio_hwdata;
else if (hwtype == IMX31_GPIO)
mxc_gpio_hwdata = &imx31_gpio_hwdata;
else
mxc_gpio_hwdata = &imx1_imx21_gpio_hwdata;
mxc_gpio_hwtype = hwtype;
}
static int mxc_gpio_to_irq(struct gpio_chip *gc, unsigned offset)
{
struct mxc_gpio_port *port = gpiochip_get_data(gc);
......@@ -417,14 +360,14 @@ static int mxc_gpio_probe(struct platform_device *pdev)
int irq_base;
int err;
mxc_gpio_get_hw(pdev);
port = devm_kzalloc(&pdev->dev, sizeof(*port), GFP_KERNEL);
if (!port)
return -ENOMEM;
port->dev = &pdev->dev;
port->hwdata = device_get_match_data(&pdev->dev);
port->base = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(port->base))
return PTR_ERR(port->base);
......@@ -461,7 +404,7 @@ static int mxc_gpio_probe(struct platform_device *pdev)
writel(0, port->base + GPIO_IMR);
writel(~0, port->base + GPIO_ISR);
if (mxc_gpio_hwtype == IMX21_GPIO) {
if (of_device_is_compatible(np, "fsl,imx21-gpio")) {
/*
* Setup one handler for all GPIO interrupts. Actually setting
* the handler is needed only once, but doing it for every port
......@@ -596,7 +539,6 @@ static struct platform_driver mxc_gpio_driver = {
.suppress_bind_attrs = true,
},
.probe = mxc_gpio_probe,
.id_table = mxc_gpio_devtype,
};
static int __init gpio_mxc_init(void)
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7