RISC-V: Initial DTS for Microchip ICICLE board

Add initial DTS for Microchip ICICLE board having only
essential devices (clocks, sdhci, ethernet, serial, etc).
The device tree is based on the U-Boot patch.

https://patchwork.ozlabs.org/project/uboot/patch/20201110103414.10142-6-padmarao.begari@microchip.com/Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

arch/riscv/boot/dts/Makefile

 # SPDX-License-Identifier: GPL-2.0
 subdir-y += sifive
 subdir-$(CONFIG_SOC_CANAAN_K210_DTB_BUILTIN) += canaan
+subdir-y += microchip
 
 obj-$(CONFIG_BUILTIN_DTB) := $(addsuffix /, $(subdir-y))

arch/riscv/boot/dts/microchip/Makefile

+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_SOC_MICROCHIP_POLARFIRE) += microchip-mpfs-icicle-kit.dtb

arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dts

+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/* Copyright (c) 2020 Microchip Technology Inc */
+
+/dts-v1/;
+
+#include "microchip-mpfs.dtsi"
+
+/* Clock frequency (in Hz) of the rtcclk */
+#define RTCCLK_FREQ		1000000
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	model = "Microchip PolarFire-SoC Icicle Kit";
+	compatible = "microchip,mpfs-icicle-kit";
+
+	chosen {
+		stdout-path = &serial0;
+	};
+
+	cpus {
+		timebase-frequency = <RTCCLK_FREQ>;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x40000000>;
+		clocks = <&clkcfg 26>;
+	};
+
+	soc {
+	};
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&serial1 {
+	status = "okay";
+};
+
+&serial2 {
+	status = "okay";
+};
+
+&serial3 {
+	status = "okay";
+};
+
+&sdcard {
+	status = "okay";
+};
+
+&emac0 {
+	phy-mode = "sgmii";
+	phy-handle = <&phy0>;
+	phy0: ethernet-phy@8 {
+		reg = <8>;
+		ti,fifo-depth = <0x01>;
+	};
+};
+
+&emac1 {
+	status = "okay";
+	phy-mode = "sgmii";
+	phy-handle = <&phy1>;
+	phy1: ethernet-phy@9 {
+		reg = <9>;
+		ti,fifo-depth = <0x01>;
+	};
+};

arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi

+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/* Copyright (c) 2020 Microchip Technology Inc */
+
+/dts-v1/;
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	model = "Microchip MPFS Icicle Kit";
+	compatible = "microchip,mpfs-icicle-kit";
+
+	chosen {
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			clock-frequency = <0>;
+			compatible = "sifive,e51", "sifive,rocket0", "riscv";
+			device_type = "cpu";
+			i-cache-block-size = <64>;
+			i-cache-sets = <128>;
+			i-cache-size = <16384>;
+			reg = <0>;
+			riscv,isa = "rv64imac";
+			status = "disabled";
+
+			cpu0_intc: interrupt-controller {
+				#interrupt-cells = <1>;
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+			};
+		};
+
+		cpu@1 {
+			clock-frequency = <0>;
+			compatible = "sifive,u54-mc", "sifive,rocket0", "riscv";
+			d-cache-block-size = <64>;
+			d-cache-sets = <64>;
+			d-cache-size = <32768>;
+			d-tlb-sets = <1>;
+			d-tlb-size = <32>;
+			device_type = "cpu";
+			i-cache-block-size = <64>;
+			i-cache-sets = <64>;
+			i-cache-size = <32768>;
+			i-tlb-sets = <1>;
+			i-tlb-size = <32>;
+			mmu-type = "riscv,sv39";
+			reg = <1>;
+			riscv,isa = "rv64imafdc";
+			tlb-split;
+			status = "okay";
+
+			cpu1_intc: interrupt-controller {
+				#interrupt-cells = <1>;
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+			};
+		};
+
+		cpu@2 {
+			clock-frequency = <0>;
+			compatible = "sifive,u54-mc", "sifive,rocket0", "riscv";
+			d-cache-block-size = <64>;
+			d-cache-sets = <64>;
+			d-cache-size = <32768>;
+			d-tlb-sets = <1>;
+			d-tlb-size = <32>;
+			device_type = "cpu";
+			i-cache-block-size = <64>;
+			i-cache-sets = <64>;
+			i-cache-size = <32768>;
+			i-tlb-sets = <1>;
+			i-tlb-size = <32>;
+			mmu-type = "riscv,sv39";
+			reg = <2>;
+			riscv,isa = "rv64imafdc";
+			tlb-split;
+			status = "okay";
+
+			cpu2_intc: interrupt-controller {
+				#interrupt-cells = <1>;
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+			};
+		};
+
+		cpu@3 {
+			clock-frequency = <0>;
+			compatible = "sifive,u54-mc", "sifive,rocket0", "riscv";
+			d-cache-block-size = <64>;
+			d-cache-sets = <64>;
+			d-cache-size = <32768>;
+			d-tlb-sets = <1>;
+			d-tlb-size = <32>;
+			device_type = "cpu";
+			i-cache-block-size = <64>;
+			i-cache-sets = <64>;
+			i-cache-size = <32768>;
+			i-tlb-sets = <1>;
+			i-tlb-size = <32>;
+			mmu-type = "riscv,sv39";
+			reg = <3>;
+			riscv,isa = "rv64imafdc";
+			tlb-split;
+			status = "okay";
+
+			cpu3_intc: interrupt-controller {
+				#interrupt-cells = <1>;
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+			};
+		};
+
+		cpu@4 {
+			clock-frequency = <0>;
+			compatible = "sifive,u54-mc", "sifive,rocket0", "riscv";
+			d-cache-block-size = <64>;
+			d-cache-sets = <64>;
+			d-cache-size = <32768>;
+			d-tlb-sets = <1>;
+			d-tlb-size = <32>;
+			device_type = "cpu";
+			i-cache-block-size = <64>;
+			i-cache-sets = <64>;
+			i-cache-size = <32768>;
+			i-tlb-sets = <1>;
+			i-tlb-size = <32>;
+			mmu-type = "riscv,sv39";
+			reg = <4>;
+			riscv,isa = "rv64imafdc";
+			tlb-split;
+			status = "okay";
+			cpu4_intc: interrupt-controller {
+				#interrupt-cells = <1>;
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+			};
+		};
+	};
+
+	soc {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		ranges;
+
+		cache-controller@2010000 {
+			compatible = "sifive,fu540-c000-ccache", "cache";
+			cache-block-size = <64>;
+			cache-level = <2>;
+			cache-sets = <1024>;
+			cache-size = <2097152>;
+			cache-unified;
+			interrupt-parent = <&plic>;
+			interrupts = <1 2 3>;
+			reg = <0x0 0x2010000 0x0 0x1000>;
+		};
+
+		clint@2000000 {
+			compatible = "sifive,clint0";
+			reg = <0x0 0x2000000 0x0 0xC000>;
+			interrupts-extended = <&cpu0_intc 3 &cpu0_intc 7
+						&cpu1_intc 3 &cpu1_intc 7
+						&cpu2_intc 3 &cpu2_intc 7
+						&cpu3_intc 3 &cpu3_intc 7
+						&cpu4_intc 3 &cpu4_intc 7>;
+		};
+
+		plic: interrupt-controller@c000000 {
+			#interrupt-cells = <1>;
+			compatible = "sifive,plic-1.0.0";
+			reg = <0x0 0xc000000 0x0 0x4000000>;
+			riscv,ndev = <186>;
+			interrupt-controller;
+			interrupts-extended = <&cpu0_intc 11
+					&cpu1_intc 11 &cpu1_intc 9
+					&cpu2_intc 11 &cpu2_intc 9
+					&cpu3_intc 11 &cpu3_intc 9
+					&cpu4_intc 11 &cpu4_intc 9>;
+		};
+
+		dma@3000000 {
+			compatible = "sifive,fu540-c000-pdma";
+			reg = <0x0 0x3000000 0x0 0x8000>;
+			interrupt-parent = <&plic>;
+			interrupts = <23 24 25 26 27 28 29 30>;
+			#dma-cells = <1>;
+		};
+
+		refclk: refclk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <600000000>;
+			clock-output-names = "msspllclk";
+		};
+
+		clkcfg: clkcfg@20002000 {
+			compatible = "microchip,mpfs-clkcfg";
+			reg = <0x0 0x20002000 0x0 0x1000>;
+			reg-names = "mss_sysreg";
+			clocks = <&refclk>;
+			#clock-cells = <1>;
+			clock-output-names = "cpu", "axi", "ahb", "envm",	/* 0-3   */
+				 "mac0", "mac1", "mmc", "timer",		/* 4-7   */
+				"mmuart0", "mmuart1", "mmuart2", "mmuart3",	/* 8-11  */
+				"mmuart4", "spi0", "spi1", "i2c0",		/* 12-15 */
+				"i2c1", "can0", "can1", "usb",			/* 16-19 */
+				"rsvd", "rtc", "qspi", "gpio0",			/* 20-23 */
+				"gpio1", "gpio2", "ddrc", "fic0",		/* 24-27 */
+				"fic1", "fic2", "fic3", "athena", "cfm";	/* 28-32 */
+		};
+
+		serial0: serial@20000000 {
+			compatible = "ns16550a";
+			reg = <0x0 0x20000000 0x0 0x400>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+			interrupt-parent = <&plic>;
+			interrupts = <90>;
+			current-speed = <115200>;
+			clocks = <&clkcfg 8>;
+			status = "disabled";
+		};
+
+		serial1: serial@20100000 {
+			compatible = "ns16550a";
+			reg = <0x0 0x20100000 0x0 0x400>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+			interrupt-parent = <&plic>;
+			interrupts = <91>;
+			current-speed = <115200>;
+			clocks = <&clkcfg 9>;
+			status = "disabled";
+		};
+
+		serial2: serial@20102000 {
+			compatible = "ns16550a";
+			reg = <0x0 0x20102000 0x0 0x400>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+			interrupt-parent = <&plic>;
+			interrupts = <92>;
+			current-speed = <115200>;
+			clocks = <&clkcfg 10>;
+			status = "disabled";
+		};
+
+		serial3: serial@20104000 {
+			compatible = "ns16550a";
+			reg = <0x0 0x20104000 0x0 0x400>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+			interrupt-parent = <&plic>;
+			interrupts = <93>;
+			current-speed = <115200>;
+			clocks = <&clkcfg 11>;
+			status = "disabled";
+		};
+
+		emmc: mmc@20008000 {
+			compatible = "cdns,sd4hc";
+			reg = <0x0 0x20008000 0x0 0x1000>;
+			interrupt-parent = <&plic>;
+			interrupts = <88 89>;
+			pinctrl-names = "default";
+			clocks = <&clkcfg 6>;
+			bus-width = <4>;
+			cap-mmc-highspeed;
+			mmc-ddr-3_3v;
+			max-frequency = <200000000>;
+			non-removable;
+			no-sd;
+			no-sdio;
+			voltage-ranges = <3300 3300>;
+			status = "disabled";
+		};
+
+		sdcard: sdhc@20008000 {
+			compatible = "cdns,sd4hc";
+			reg = <0x0 0x20008000 0x0 0x1000>;
+			interrupt-parent = <&plic>;
+			interrupts = <88>;
+			pinctrl-names = "default";
+			clocks = <&clkcfg 6>;
+			bus-width = <4>;
+			disable-wp;
+			cap-sd-highspeed;
+			card-detect-delay = <200>;
+			sd-uhs-sdr12;
+			sd-uhs-sdr25;
+			sd-uhs-sdr50;
+			sd-uhs-sdr104;
+			max-frequency = <200000000>;
+			status = "disabled";
+		};
+
+		emac0: ethernet@20110000 {
+			compatible = "cdns,macb";
+			reg = <0x0 0x20110000 0x0 0x2000>;
+			interrupt-parent = <&plic>;
+			interrupts = <64 65 66 67>;
+			local-mac-address = [00 00 00 00 00 00];
+			clocks = <&clkcfg 4>, <&clkcfg 2>;
+			clock-names = "pclk", "hclk";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		emac1: ethernet@20112000 {
+			compatible = "cdns,macb";
+			reg = <0x0 0x20112000 0x0 0x2000>;
+			interrupt-parent = <&plic>;
+			interrupts = <70 71 72 73>;
+			mac-address = [00 00 00 00 00 00];
+			clocks = <&clkcfg 5>, <&clkcfg 2>;
+			status = "disabled";
+			clock-names = "pclk", "hclk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+	};
+};