Commit 0fc6a323 authored by Rafał Miłecki's avatar Rafał Miłecki Committed by Mark Brown

spi: bcm53xx: driver for SPI controller on Broadcom bcma SoC

Broadcom 53xx ARM SoCs use bcma bus that contains various cores (AKA
devices). If board has a serial flash, it's connected over SPI and the
bcma bus includes a SPI controller. Example log from such a board:
bus0: Found chip with id 53010, rev 0x00 and package 0x02
(...)
bus0: Core 18 found: SPI flash controller (manuf 0x4BF, id 0x50A, rev 0x01, class 0x0)

This patch adds a bcma driver for SPI core, it registers SPI master
controller and "bcm53xxspiflash" SPI device.
Signed-off-by: default avatarRafał Miłecki <zajec5@gmail.com>
Signed-off-by: default avatarMark Brown <broonie@linaro.org>
parent 7d1311b9
...@@ -112,6 +112,12 @@ config SPI_AU1550 ...@@ -112,6 +112,12 @@ config SPI_AU1550
If you say yes to this option, support will be included for the If you say yes to this option, support will be included for the
PSC SPI controller found on Au1550, Au1200 and Au1300 series. PSC SPI controller found on Au1550, Au1200 and Au1300 series.
config SPI_BCM53XX
tristate "Broadcom BCM53xx SPI controller"
depends on ARCH_BCM_5301X
help
Enable support for the SPI controller on Broadcom BCM53xx ARM SoCs.
config SPI_BCM63XX config SPI_BCM63XX
tristate "Broadcom BCM63xx SPI controller" tristate "Broadcom BCM63xx SPI controller"
depends on BCM63XX depends on BCM63XX
......
...@@ -15,6 +15,7 @@ obj-$(CONFIG_SPI_ATMEL) += spi-atmel.o ...@@ -15,6 +15,7 @@ obj-$(CONFIG_SPI_ATMEL) += spi-atmel.o
obj-$(CONFIG_SPI_ATH79) += spi-ath79.o obj-$(CONFIG_SPI_ATH79) += spi-ath79.o
obj-$(CONFIG_SPI_AU1550) += spi-au1550.o obj-$(CONFIG_SPI_AU1550) += spi-au1550.o
obj-$(CONFIG_SPI_BCM2835) += spi-bcm2835.o obj-$(CONFIG_SPI_BCM2835) += spi-bcm2835.o
obj-$(CONFIG_SPI_BCM53XX) += spi-bcm53xx.o
obj-$(CONFIG_SPI_BCM63XX) += spi-bcm63xx.o obj-$(CONFIG_SPI_BCM63XX) += spi-bcm63xx.o
obj-$(CONFIG_SPI_BCM63XX_HSSPI) += spi-bcm63xx-hsspi.o obj-$(CONFIG_SPI_BCM63XX_HSSPI) += spi-bcm63xx-hsspi.o
obj-$(CONFIG_SPI_BFIN5XX) += spi-bfin5xx.o obj-$(CONFIG_SPI_BFIN5XX) += spi-bfin5xx.o
......
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/bcma/bcma.h>
#include <linux/spi/spi.h>
#include "spi-bcm53xx.h"
#define BCM53XXSPI_MAX_SPI_BAUD 13500000 /* 216 MHz? */
/* The longest observed required wait was 19 ms */
#define BCM53XXSPI_SPE_TIMEOUT_MS 80
struct bcm53xxspi {
struct bcma_device *core;
struct spi_master *master;
size_t read_offset;
};
static inline u32 bcm53xxspi_read(struct bcm53xxspi *b53spi, u16 offset)
{
return bcma_read32(b53spi->core, offset);
}
static inline void bcm53xxspi_write(struct bcm53xxspi *b53spi, u16 offset,
u32 value)
{
bcma_write32(b53spi->core, offset, value);
}
static inline unsigned int bcm53xxspi_calc_timeout(size_t len)
{
/* Do some magic calculation based on length and buad. Add 10% and 1. */
return (len * 9000 / BCM53XXSPI_MAX_SPI_BAUD * 110 / 100) + 1;
}
static int bcm53xxspi_wait(struct bcm53xxspi *b53spi, unsigned int timeout_ms)
{
unsigned long deadline;
u32 tmp;
/* SPE bit has to be 0 before we read MSPI STATUS */
deadline = jiffies + BCM53XXSPI_SPE_TIMEOUT_MS * HZ / 1000;
do {
tmp = bcm53xxspi_read(b53spi, B53SPI_MSPI_SPCR2);
if (!(tmp & B53SPI_MSPI_SPCR2_SPE))
break;
udelay(5);
} while (!time_after_eq(jiffies, deadline));
if (tmp & B53SPI_MSPI_SPCR2_SPE)
goto spi_timeout;
/* Check status */
deadline = jiffies + timeout_ms * HZ / 1000;
do {
tmp = bcm53xxspi_read(b53spi, B53SPI_MSPI_MSPI_STATUS);
if (tmp & B53SPI_MSPI_MSPI_STATUS_SPIF) {
bcm53xxspi_write(b53spi, B53SPI_MSPI_MSPI_STATUS, 0);
return 0;
}
cpu_relax();
udelay(100);
} while (!time_after_eq(jiffies, deadline));
spi_timeout:
bcm53xxspi_write(b53spi, B53SPI_MSPI_MSPI_STATUS, 0);
pr_err("Timeout waiting for SPI to be ready!\n");
return -EBUSY;
}
static void bcm53xxspi_buf_write(struct bcm53xxspi *b53spi, u8 *w_buf,
size_t len, bool cont)
{
u32 tmp;
int i;
for (i = 0; i < len; i++) {
/* Transmit Register File MSB */
bcm53xxspi_write(b53spi, B53SPI_MSPI_TXRAM + 4 * (i * 2),
(unsigned int)w_buf[i]);
}
for (i = 0; i < len; i++) {
tmp = B53SPI_CDRAM_CONT | B53SPI_CDRAM_PCS_DISABLE_ALL |
B53SPI_CDRAM_PCS_DSCK;
if (!cont && i == len - 1)
tmp &= ~B53SPI_CDRAM_CONT;
tmp &= ~0x1;
/* Command Register File */
bcm53xxspi_write(b53spi, B53SPI_MSPI_CDRAM + 4 * i, tmp);
}
/* Set queue pointers */
bcm53xxspi_write(b53spi, B53SPI_MSPI_NEWQP, 0);
bcm53xxspi_write(b53spi, B53SPI_MSPI_ENDQP, len - 1);
if (cont)
bcm53xxspi_write(b53spi, B53SPI_MSPI_WRITE_LOCK, 1);
/* Start SPI transfer */
tmp = bcm53xxspi_read(b53spi, B53SPI_MSPI_SPCR2);
tmp |= B53SPI_MSPI_SPCR2_SPE;
if (cont)
tmp |= B53SPI_MSPI_SPCR2_CONT_AFTER_CMD;
bcm53xxspi_write(b53spi, B53SPI_MSPI_SPCR2, tmp);
/* Wait for SPI to finish */
bcm53xxspi_wait(b53spi, bcm53xxspi_calc_timeout(len));
if (!cont)
bcm53xxspi_write(b53spi, B53SPI_MSPI_WRITE_LOCK, 0);
b53spi->read_offset = len;
}
static void bcm53xxspi_buf_read(struct bcm53xxspi *b53spi, u8 *r_buf,
size_t len, bool cont)
{
u32 tmp;
int i;
for (i = 0; i < b53spi->read_offset + len; i++) {
tmp = B53SPI_CDRAM_CONT | B53SPI_CDRAM_PCS_DISABLE_ALL |
B53SPI_CDRAM_PCS_DSCK;
if (!cont && i == b53spi->read_offset + len - 1)
tmp &= ~B53SPI_CDRAM_CONT;
tmp &= ~0x1;
/* Command Register File */
bcm53xxspi_write(b53spi, B53SPI_MSPI_CDRAM + 4 * i, tmp);
}
/* Set queue pointers */
bcm53xxspi_write(b53spi, B53SPI_MSPI_NEWQP, 0);
bcm53xxspi_write(b53spi, B53SPI_MSPI_ENDQP,
b53spi->read_offset + len - 1);
if (cont)
bcm53xxspi_write(b53spi, B53SPI_MSPI_WRITE_LOCK, 1);
/* Start SPI transfer */
tmp = bcm53xxspi_read(b53spi, B53SPI_MSPI_SPCR2);
tmp |= B53SPI_MSPI_SPCR2_SPE;
if (cont)
tmp |= B53SPI_MSPI_SPCR2_CONT_AFTER_CMD;
bcm53xxspi_write(b53spi, B53SPI_MSPI_SPCR2, tmp);
/* Wait for SPI to finish */
bcm53xxspi_wait(b53spi, bcm53xxspi_calc_timeout(len));
if (!cont)
bcm53xxspi_write(b53spi, B53SPI_MSPI_WRITE_LOCK, 0);
for (i = 0; i < len; ++i) {
int offset = b53spi->read_offset + i;
/* Data stored in the transmit register file LSB */
r_buf[i] = (u8)bcm53xxspi_read(b53spi, B53SPI_MSPI_RXRAM + 4 * (1 + offset * 2));
}
b53spi->read_offset = 0;
}
static int bcm53xxspi_transfer_one(struct spi_master *master,
struct spi_device *spi,
struct spi_transfer *t)
{
struct bcm53xxspi *b53spi = spi_master_get_devdata(master);
u8 *buf;
size_t left;
if (t->tx_buf) {
buf = (u8 *)t->tx_buf;
left = t->len;
while (left) {
size_t to_write = min_t(size_t, 16, left);
bool cont = left - to_write > 0;
bcm53xxspi_buf_write(b53spi, buf, to_write, cont);
left -= to_write;
buf += to_write;
}
}
if (t->rx_buf) {
buf = (u8 *)t->rx_buf;
left = t->len;
while (left) {
size_t to_read = min_t(size_t, 16 - b53spi->read_offset,
left);
bool cont = left - to_read > 0;
bcm53xxspi_buf_read(b53spi, buf, to_read, cont);
left -= to_read;
buf += to_read;
}
}
return 0;
}
/**************************************************
* BCMA
**************************************************/
struct spi_board_info bcm53xx_info = {
.modalias = "bcm53xxspiflash",
};
static const struct bcma_device_id bcm53xxspi_bcma_tbl[] = {
BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_NS_QSPI, BCMA_ANY_REV, BCMA_ANY_CLASS),
BCMA_CORETABLE_END
};
MODULE_DEVICE_TABLE(bcma, bcm53xxspi_bcma_tbl);
static int bcm53xxspi_bcma_probe(struct bcma_device *core)
{
struct bcm53xxspi *b53spi;
struct spi_master *master;
int err;
if (core->bus->drv_cc.core->id.rev != 42) {
pr_err("SPI on SoC with unsupported ChipCommon rev\n");
return -ENOTSUPP;
}
master = spi_alloc_master(&core->dev, sizeof(*b53spi));
if (!master)
return -ENOMEM;
b53spi = spi_master_get_devdata(master);
b53spi->master = master;
b53spi->core = core;
master->transfer_one = bcm53xxspi_transfer_one;
bcma_set_drvdata(core, b53spi);
err = devm_spi_register_master(&core->dev, master);
if (err) {
spi_master_put(master);
bcma_set_drvdata(core, NULL);
goto out;
}
/* Broadcom SoCs (at least with the CC rev 42) use SPI for flash only */
spi_new_device(master, &bcm53xx_info);
out:
return err;
}
static void bcm53xxspi_bcma_remove(struct bcma_device *core)
{
struct bcm53xxspi *b53spi = bcma_get_drvdata(core);
spi_unregister_master(b53spi->master);
}
static struct bcma_driver bcm53xxspi_bcma_driver = {
.name = KBUILD_MODNAME,
.id_table = bcm53xxspi_bcma_tbl,
.probe = bcm53xxspi_bcma_probe,
.remove = bcm53xxspi_bcma_remove,
};
/**************************************************
* Init & exit
**************************************************/
static int __init bcm53xxspi_module_init(void)
{
int err = 0;
err = bcma_driver_register(&bcm53xxspi_bcma_driver);
if (err)
pr_err("Failed to register bcma driver: %d\n", err);
return err;
}
static void __exit bcm53xxspi_module_exit(void)
{
bcma_driver_unregister(&bcm53xxspi_bcma_driver);
}
module_init(bcm53xxspi_module_init);
module_exit(bcm53xxspi_module_exit);
#ifndef SPI_BCM53XX_H
#define SPI_BCM53XX_H
#define B53SPI_BSPI_REVISION_ID 0x000
#define B53SPI_BSPI_SCRATCH 0x004
#define B53SPI_BSPI_MAST_N_BOOT_CTRL 0x008
#define B53SPI_BSPI_BUSY_STATUS 0x00c
#define B53SPI_BSPI_INTR_STATUS 0x010
#define B53SPI_BSPI_B0_STATUS 0x014
#define B53SPI_BSPI_B0_CTRL 0x018
#define B53SPI_BSPI_B1_STATUS 0x01c
#define B53SPI_BSPI_B1_CTRL 0x020
#define B53SPI_BSPI_STRAP_OVERRIDE_CTRL 0x024
#define B53SPI_BSPI_FLEX_MODE_ENABLE 0x028
#define B53SPI_BSPI_BITS_PER_CYCLE 0x02c
#define B53SPI_BSPI_BITS_PER_PHASE 0x030
#define B53SPI_BSPI_CMD_AND_MODE_BYTE 0x034
#define B53SPI_BSPI_BSPI_FLASH_UPPER_ADDR_BYTE 0x038
#define B53SPI_BSPI_BSPI_XOR_VALUE 0x03c
#define B53SPI_BSPI_BSPI_XOR_ENABLE 0x040
#define B53SPI_BSPI_BSPI_PIO_MODE_ENABLE 0x044
#define B53SPI_BSPI_BSPI_PIO_IODIR 0x048
#define B53SPI_BSPI_BSPI_PIO_DATA 0x04c
/* RAF */
#define B53SPI_RAF_START_ADDR 0x100
#define B53SPI_RAF_NUM_WORDS 0x104
#define B53SPI_RAF_CTRL 0x108
#define B53SPI_RAF_FULLNESS 0x10c
#define B53SPI_RAF_WATERMARK 0x110
#define B53SPI_RAF_STATUS 0x114
#define B53SPI_RAF_READ_DATA 0x118
#define B53SPI_RAF_WORD_CNT 0x11c
#define B53SPI_RAF_CURR_ADDR 0x120
/* MSPI */
#define B53SPI_MSPI_SPCR0_LSB 0x200
#define B53SPI_MSPI_SPCR0_MSB 0x204
#define B53SPI_MSPI_SPCR1_LSB 0x208
#define B53SPI_MSPI_SPCR1_MSB 0x20c
#define B53SPI_MSPI_NEWQP 0x210
#define B53SPI_MSPI_ENDQP 0x214
#define B53SPI_MSPI_SPCR2 0x218
#define B53SPI_MSPI_SPCR2_SPE 0x00000040
#define B53SPI_MSPI_SPCR2_CONT_AFTER_CMD 0x00000080
#define B53SPI_MSPI_MSPI_STATUS 0x220
#define B53SPI_MSPI_MSPI_STATUS_SPIF 0x00000001
#define B53SPI_MSPI_CPTQP 0x224
#define B53SPI_MSPI_TXRAM 0x240 /* 32 registers, up to 0x2b8 */
#define B53SPI_MSPI_RXRAM 0x2c0 /* 32 registers, up to 0x33c */
#define B53SPI_MSPI_CDRAM 0x340 /* 16 registers, up to 0x37c */
#define B53SPI_CDRAM_PCS_PCS0 0x00000001
#define B53SPI_CDRAM_PCS_PCS1 0x00000002
#define B53SPI_CDRAM_PCS_PCS2 0x00000004
#define B53SPI_CDRAM_PCS_PCS3 0x00000008
#define B53SPI_CDRAM_PCS_DISABLE_ALL 0x0000000f
#define B53SPI_CDRAM_PCS_DSCK 0x00000010
#define B53SPI_CDRAM_BITSE 0x00000040
#define B53SPI_CDRAM_CONT 0x00000080
#define B53SPI_MSPI_WRITE_LOCK 0x380
#define B53SPI_MSPI_DISABLE_FLUSH_GEN 0x384
/* Interrupt */
#define B53SPI_INTR_RAF_LR_FULLNESS_REACHED 0x3a0
#define B53SPI_INTR_RAF_LR_TRUNCATED 0x3a4
#define B53SPI_INTR_RAF_LR_IMPATIENT 0x3a8
#define B53SPI_INTR_RAF_LR_SESSION_DONE 0x3ac
#define B53SPI_INTR_RAF_LR_OVERREAD 0x3b0
#define B53SPI_INTR_MSPI_DONE 0x3b4
#define B53SPI_INTR_MSPI_HALT_SET_TRANSACTION_DONE 0x3b8
#endif /* SPI_BCM53XX_H */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment