Commit 1023ef5d authored by Andrey Smirnov's avatar Andrey Smirnov Committed by Greg Kroah-Hartman

ARM: dts: imx51: Specify IMX5_CLK_IPG as "ahb" clock to SDMA

[ Upstream commit 918bbde8 ]

Since 25aaa75d SDMA driver uses clock rates of "ipg" and "ahb"
clock to determine if it needs to configure the IP block as operating
at 1:1 or 1:2 clock ratio (ACR bit in SDMAARM_CONFIG). Specifying both
clocks as IMX5_CLK_SDMA results in driver incorrectly thinking that
ratio is 1:1 which results in broken SDMA funtionality. Fix the code
to specify IMX5_CLK_AHB as "ahb" clock for SDMA, to avoid detecting
incorrect clock ratio.
Signed-off-by: default avatarAndrey Smirnov <andrew.smirnov@gmail.com>
Cc: Angus Ainslie (Purism) <angus@akkea.ca>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: default avatarShawn Guo <shawnguo@kernel.org>
Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
parent d72da826
...@@ -489,7 +489,7 @@ sdma: sdma@83fb0000 { ...@@ -489,7 +489,7 @@ sdma: sdma@83fb0000 {
reg = <0x83fb0000 0x4000>; reg = <0x83fb0000 0x4000>;
interrupts = <6>; interrupts = <6>;
clocks = <&clks IMX5_CLK_SDMA_GATE>, clocks = <&clks IMX5_CLK_SDMA_GATE>,
<&clks IMX5_CLK_SDMA_GATE>; <&clks IMX5_CLK_AHB>;
clock-names = "ipg", "ahb"; clock-names = "ipg", "ahb";
#dma-cells = <3>; #dma-cells = <3>;
fsl,sdma-ram-script-name = "imx/sdma/sdma-imx51.bin"; fsl,sdma-ram-script-name = "imx/sdma/sdma-imx51.bin";
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment