ath9k: Fix RTC_DERIVED_CLK usage

commit 4e6ce4dc upstream.

Based on the reference clock, which could be 25MHz or 40MHz,
AR_RTC_DERIVED_CLK is programmed differently for AR9340 and AR9550.
But, when a chip reset is done, processing the initvals
sets the register back to the default value.

Fix this by moving the code in ath9k_hw_init_pll() to
ar9003_hw_override_ini(). Also, do this override for AR9531.

js: remove AR_SREV_9531 test as 9531 support is not in 3.12 yet
Signed-off-by: Miaoqing Pan <miaoqing@qca.qualcomm.com>
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>

drivers/net/wireless/ath/ath9k/ar9003_phy.c

@@ -648,6 +648,19 @@ static void ar9003_hw_override_ini(struct ath_hw *ah)
 		else
 			ah->enabled_cals &= ~TX_CL_CAL;
 	}
+
+	if (AR_SREV_9340(ah) || AR_SREV_9550(ah)) {
+		if (ah->is_clk_25mhz) {
+			REG_WRITE(ah, AR_RTC_DERIVED_CLK, 0x17c << 1);
+			REG_WRITE(ah, AR_SLP32_MODE, 0x0010f3d7);
+			REG_WRITE(ah, AR_SLP32_INC, 0x0001e7ae);
+		} else {
+			REG_WRITE(ah, AR_RTC_DERIVED_CLK, 0x261 << 1);
+			REG_WRITE(ah, AR_SLP32_MODE, 0x0010f400);
+			REG_WRITE(ah, AR_SLP32_INC, 0x0001e800);
+		}
+		udelay(100);
+	}
 }
 
 static void ar9003_hw_prog_ini(struct ath_hw *ah,

drivers/net/wireless/ath/ath9k/hw.c

@@ -916,19 +916,6 @@ static void ath9k_hw_init_pll(struct ath_hw *ah,
 	udelay(RTC_PLL_SETTLE_DELAY);
 
 	REG_WRITE(ah, AR_RTC_SLEEP_CLK, AR_RTC_FORCE_DERIVED_CLK);
-
-	if (AR_SREV_9340(ah) || AR_SREV_9550(ah)) {
-		if (ah->is_clk_25mhz) {
-			REG_WRITE(ah, AR_RTC_DERIVED_CLK, 0x17c << 1);
-			REG_WRITE(ah, AR_SLP32_MODE, 0x0010f3d7);
-			REG_WRITE(ah,  AR_SLP32_INC, 0x0001e7ae);
-		} else {
-			REG_WRITE(ah, AR_RTC_DERIVED_CLK, 0x261 << 1);
-			REG_WRITE(ah, AR_SLP32_MODE, 0x0010f400);
-			REG_WRITE(ah,  AR_SLP32_INC, 0x0001e800);
-		}
-		udelay(100);
-	}
 }
 
 static void ath9k_hw_init_interrupt_masks(struct ath_hw *ah,