ARM: dts: imx: Use 'pmic' as node name

Devicetree node names should be generic. Use 'pmic' as node name
to avoid devicetree check warning from pfuze100.yaml.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

arch/arm/boot/dts/imx6dl-riotboard.dts

@@ -177,7 +177,7 @@ codec: sgtl5000@a {
 		VDDIO-supply = <&reg_3p3v>;
 	};
 
-	pmic: pf0100@8 {
+	pmic: pmic@8 {
 		compatible = "fsl,pfuze100";
 		reg = <0x08>;
 		interrupt-parent = <&gpio5>;

arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts

@@ -134,7 +134,7 @@ &pinctrl_stmpe2
 		     &pinctrl_pfuze>;
 	status = "okay";
 
-	pmic: pfuze100@8 {
+	pmic: pmic@8 {
 		compatible = "fsl,pfuze100";
 		reg = <0x08>;
 		interrupt-parent = <&gpio3>;

arch/arm/boot/dts/imx6q-gw5400-a.dts

@@ -206,7 +206,7 @@ &i2c2 {
 	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
 
-	pmic: pfuze100@8 {
+	pmic: pmic@8 {
 		compatible = "fsl,pfuze100";
 		reg = <0x08>;
 

arch/arm/boot/dts/imx6q-novena.dts

@@ -308,7 +308,7 @@ &i2c2 {
 	pinctrl-0 = <&pinctrl_i2c2_novena>;
 	status = "okay";
 
-	pmic: pfuze100@8 {
+	pmic: pmic@8 {
 		compatible = "fsl,pfuze100";
 		reg = <0x08>;
 

arch/arm/boot/dts/imx6q-pistachio.dts

@@ -208,7 +208,7 @@ &i2c2 {
 	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
 
-	pmic: pfuze100@8 {
+	pmic: pmic@8 {
 		compatible = "fsl,pfuze100";
 		reg = <0x08>;
 

arch/arm/boot/dts/imx6qdl-gw54xx.dtsi

@@ -398,7 +398,7 @@ &i2c2 {
 	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
 
-	pmic: pfuze100@8 {
+	pmic: pmic@8 {
 		compatible = "fsl,pfuze100";
 		reg = <0x08>;
 

arch/arm/boot/dts/imx6qdl-sabreauto.dtsi

@@ -336,7 +336,7 @@ &i2c2 {
 	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
 
-	pmic: pfuze100@8 {
+	pmic: pmic@8 {
 		compatible = "fsl,pfuze100";
 		reg = <0x08>;
 

arch/arm/boot/dts/imx6qdl-sabresd.dtsi

@@ -338,7 +338,7 @@ ov5640_to_mipi_csi2: endpoint {
 		};
 	};
 
-	pmic: pfuze100@8 {
+	pmic: pmic@8 {
 		compatible = "fsl,pfuze100";
 		reg = <0x08>;
 

arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi

@@ -27,7 +27,7 @@ &i2c3 {
 	pinctrl-0 = <&pinctrl_i2c3>;
 	status = "okay";
 
-	pmic: pfuze100@8 {
+	pmic: pmic@8 {
 		compatible = "fsl,pfuze100";
 		reg = <0x08>;
 

arch/arm/boot/dts/imx6sl-evk.dts

@@ -160,7 +160,7 @@ &i2c1 {
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
-	pmic: pfuze100@8 {
+	pmic: pmic@8 {
 		compatible = "fsl,pfuze100";
 		reg = <0x08>;
 

arch/arm/boot/dts/imx6sx-sdb-reva.dts

@@ -15,7 +15,7 @@ &i2c1 {
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
-	pmic: pfuze100@8 {
+	pmic: pmic@8 {
 		compatible = "fsl,pfuze100";
 		reg = <0x08>;
 

arch/arm/boot/dts/imx6sx-sdb.dts

@@ -14,7 +14,7 @@ &i2c1 {
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
-	pmic: pfuze100@8 {
+	pmic: pmic@8 {
 		compatible = "fsl,pfuze200";
 		reg = <0x08>;
 

arch/arm/boot/dts/imx6sx-softing-vining-2000.dts

@@ -171,7 +171,7 @@ proximity: sx9500@28 {
 		reset-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
 	};
 
-	pmic: pfuze100@8 {
+	pmic: pmic@8 {
 		compatible = "fsl,pfuze200";
 		reg = <0x08>;
 

arch/arm/boot/dts/imx6ul-pico.dtsi

@@ -131,7 +131,7 @@ &i2c1 {
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
-	pmic: pfuze3000@8 {
+	pmic: pmic@8 {
 		compatible = "fsl,pfuze3000";
 		reg = <0x08>;
 

arch/arm/boot/dts/imx7d-nitrogen7.dts

@@ -159,7 +159,7 @@ &i2c1 {
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
-	pmic: pfuze3000@8 {
+	pmic: pmic@8 {
 		compatible = "fsl,pfuze3000";
 		reg = <0x08>;
 

arch/arm/boot/dts/imx7d-pico.dtsi

@@ -170,7 +170,7 @@ &i2c4 {
 	pinctrl-0 = <&pinctrl_i2c4>;
 	status = "okay";
 
-	pmic: pfuze3000@8 {
+	pmic: pmic@8 {
 		compatible = "fsl,pfuze3000";
 		reg = <0x08>;
 

arch/arm/boot/dts/imx7d-sdb.dts

@@ -275,7 +275,7 @@ &i2c1 {
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
-	pmic: pfuze3000@8 {
+	pmic: pmic@8 {
 		compatible = "fsl,pfuze3000";
 		reg = <0x08>;
 

arch/arm/boot/dts/imx7s-warp.dts

@@ -94,7 +94,7 @@ &i2c1 {
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
-	pmic: pfuze3000@8 {
+	pmic: pmic@8 {
 		compatible = "fsl,pfuze3000";
 		reg = <0x08>;