drm: Check crtc_state->enable rather than crtc->enabled in drm_plane_helper_check_state()

drm_plane_helper_check_state() is supposed to do things the atomic way,
so it should not be inspecting crtc->enabled. Rather we should be
looking at crtc_state->enable.

We have a slight complication due to drm_plane_helper_check_update()
reusing drm_plane_helper_check_state() for non-atomic drivers. Thus
we'll have to pass the crtc_state in manally and construct a fake
crtc_state in drm_plane_helper_check_update().

v2: Fix the WARNs about plane_state->crtc matching crtc_state->crtc
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171101201558.6059-1-ville.syrjala@linux.intel.comReviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drivers/gpu/drm/arm/hdlcd_crtc.c

@@ -252,7 +252,7 @@ static int hdlcd_plane_atomic_check(struct drm_plane *plane,
 	clip.x2 = crtc_state->adjusted_mode.hdisplay;
 	clip.y2 = crtc_state->adjusted_mode.vdisplay;
 
-	return drm_plane_helper_check_state(state, &clip,
+	return drm_plane_helper_check_state(state, crtc_state, &clip,
 					    DRM_PLANE_HELPER_NO_SCALING,
 					    DRM_PLANE_HELPER_NO_SCALING,
 					    false, true);

drivers/gpu/drm/arm/malidp_planes.c

@@ -150,7 +150,8 @@ static int malidp_se_check_scaling(struct malidp_plane *mp,
 
 	clip.x2 = crtc_state->adjusted_mode.hdisplay;
 	clip.y2 = crtc_state->adjusted_mode.vdisplay;
-	ret = drm_plane_helper_check_state(state, &clip, 0, INT_MAX, true, true);
+	ret = drm_plane_helper_check_state(state, crtc_state, &clip,
+					   0, INT_MAX, true, true);
 	if (ret)
 		return ret;
 

drivers/gpu/drm/drm_plane_helper.c

@@ -101,7 +101,8 @@ static int get_connectors_for_crtc(struct drm_crtc *crtc,
 
 /**
  * drm_plane_helper_check_state() - Check plane state for validity
- * @state: plane state to check
+ * @plane_state: plane state to check
+ * @crtc_state: crtc state to check
  * @clip: integer clipping coordinates
  * @min_scale: minimum @src:@dest scaling factor in 16.16 fixed point
  * @max_scale: maximum @src:@dest scaling factor in 16.16 fixed point
@@ -120,35 +121,37 @@ static int get_connectors_for_crtc(struct drm_crtc *crtc,
  * RETURNS:
  * Zero if update appears valid, error code on failure
  */
-int drm_plane_helper_check_state(struct drm_plane_state *state,
+int drm_plane_helper_check_state(struct drm_plane_state *plane_state,
+				 const struct drm_crtc_state *crtc_state,
 				 const struct drm_rect *clip,
 				 int min_scale,
 				 int max_scale,
 				 bool can_position,
 				 bool can_update_disabled)
 {
-	struct drm_crtc *crtc = state->crtc;
-	struct drm_framebuffer *fb = state->fb;
-	struct drm_rect *src = &state->src;
-	struct drm_rect *dst = &state->dst;
-	unsigned int rotation = state->rotation;
+	struct drm_framebuffer *fb = plane_state->fb;
+	struct drm_rect *src = &plane_state->src;
+	struct drm_rect *dst = &plane_state->dst;
+	unsigned int rotation = plane_state->rotation;
 	int hscale, vscale;
 
-	*src = drm_plane_state_src(state);
-	*dst = drm_plane_state_dest(state);
+	WARN_ON(plane_state->crtc && plane_state->crtc != crtc_state->crtc);
+
+	*src = drm_plane_state_src(plane_state);
+	*dst = drm_plane_state_dest(plane_state);
 
 	if (!fb) {
-		state->visible = false;
+		plane_state->visible = false;
 		return 0;
 	}
 
 	/* crtc should only be NULL when disabling (i.e., !fb) */
-	if (WARN_ON(!crtc)) {
-		state->visible = false;
+	if (WARN_ON(!plane_state->crtc)) {
+		plane_state->visible = false;
 		return 0;
 	}
 
-	if (!crtc->enabled && !can_update_disabled) {
+	if (!crtc_state->enable && !can_update_disabled) {
 		DRM_DEBUG_KMS("Cannot update plane of a disabled CRTC.\n");
 		return -EINVAL;
 	}
@@ -160,16 +163,16 @@ int drm_plane_helper_check_state(struct drm_plane_state *state,
 	vscale = drm_rect_calc_vscale(src, dst, min_scale, max_scale);
 	if (hscale < 0 || vscale < 0) {
 		DRM_DEBUG_KMS("Invalid scaling of plane\n");
-		drm_rect_debug_print("src: ", &state->src, true);
-		drm_rect_debug_print("dst: ", &state->dst, false);
+		drm_rect_debug_print("src: ", &plane_state->src, true);
+		drm_rect_debug_print("dst: ", &plane_state->dst, false);
 		return -ERANGE;
 	}
 
-	state->visible = drm_rect_clip_scaled(src, dst, clip, hscale, vscale);
+	plane_state->visible = drm_rect_clip_scaled(src, dst, clip, hscale, vscale);
 
 	drm_rect_rotate_inv(src, fb->width << 16, fb->height << 16, rotation);
 
-	if (!state->visible)
+	if (!plane_state->visible)
 		/*
 		 * Plane isn't visible; some drivers can handle this
 		 * so we just return success here.  Drivers that can't
@@ -230,7 +233,7 @@ int drm_plane_helper_check_update(struct drm_plane *plane,
 				  bool can_update_disabled,
 				  bool *visible)
 {
-	struct drm_plane_state state = {
+	struct drm_plane_state plane_state = {
 		.plane = plane,
 		.crtc = crtc,
 		.fb = fb,
@@ -245,18 +248,22 @@ int drm_plane_helper_check_update(struct drm_plane *plane,
 		.rotation = rotation,
 		.visible = *visible,
 	};
+	struct drm_crtc_state crtc_state = {
+		.crtc = crtc,
+		.enable = crtc->enabled,
+	};
 	int ret;
 
-	ret = drm_plane_helper_check_state(&state, clip,
+	ret = drm_plane_helper_check_state(&plane_state, &crtc_state, clip,
 					   min_scale, max_scale,
 					   can_position,
 					   can_update_disabled);
 	if (ret)
 		return ret;
 
-	*src = state.src;
-	*dst = state.dst;
-	*visible = state.visible;
+	*src = plane_state.src;
+	*dst = plane_state.dst;
+	*visible = plane_state.visible;
 
 	return 0;
 }

drivers/gpu/drm/drm_simple_kms_helper.c

@@ -103,7 +103,7 @@ static int drm_simple_kms_plane_atomic_check(struct drm_plane *plane,
 	clip.x2 = crtc_state->adjusted_mode.hdisplay;
 	clip.y2 = crtc_state->adjusted_mode.vdisplay;
 
-	ret = drm_plane_helper_check_state(plane_state, &clip,
+	ret = drm_plane_helper_check_state(plane_state, crtc_state, &clip,
 					   DRM_PLANE_HELPER_NO_SCALING,
 					   DRM_PLANE_HELPER_NO_SCALING,
 					   false, true);

drivers/gpu/drm/i915/intel_display.c

@@ -9419,6 +9419,7 @@ static int intel_check_cursor(struct intel_crtc_state *crtc_state,
 	int ret;
 
 	ret = drm_plane_helper_check_state(&plane_state->base,
+					   &crtc_state->base,
 					   &plane_state->clip,
 					   DRM_PLANE_HELPER_NO_SCALING,
 					   DRM_PLANE_HELPER_NO_SCALING,
@@ -12842,6 +12843,7 @@ intel_check_primary_plane(struct intel_plane *plane,
 	}
 
 	ret = drm_plane_helper_check_state(&state->base,
+					   &crtc_state->base,
 					   &state->clip,
 					   min_scale, max_scale,
 					   can_position, true);

drivers/gpu/drm/imx/ipuv3-plane.c

@@ -342,7 +342,7 @@ static int ipu_plane_atomic_check(struct drm_plane *plane,
 	clip.y1 = 0;
 	clip.x2 = crtc_state->adjusted_mode.hdisplay;
 	clip.y2 = crtc_state->adjusted_mode.vdisplay;
-	ret = drm_plane_helper_check_state(state, &clip,
+	ret = drm_plane_helper_check_state(state, crtc_state, &clip,
 					   DRM_PLANE_HELPER_NO_SCALING,
 					   DRM_PLANE_HELPER_NO_SCALING,
 					   can_position, true);

drivers/gpu/drm/mediatek/mtk_drm_plane.c

@@ -111,7 +111,7 @@ static int mtk_plane_atomic_check(struct drm_plane *plane,
 	clip.x2 = crtc_state->mode.hdisplay;
 	clip.y2 = crtc_state->mode.vdisplay;
 
-	return drm_plane_helper_check_state(state, &clip,
+	return drm_plane_helper_check_state(state, crtc_state, &clip,
 					    DRM_PLANE_HELPER_NO_SCALING,
 					    DRM_PLANE_HELPER_NO_SCALING,
 					    true, true);

drivers/gpu/drm/meson/meson_plane.c

@@ -61,7 +61,7 @@ static int meson_plane_atomic_check(struct drm_plane *plane,
 	clip.x2 = crtc_state->mode.hdisplay;
 	clip.y2 = crtc_state->mode.vdisplay;
 
-	return drm_plane_helper_check_state(state, &clip,
+	return drm_plane_helper_check_state(state, crtc_state, &clip,
 					    DRM_PLANE_HELPER_NO_SCALING,
 					    DRM_PLANE_HELPER_NO_SCALING,
 					    true, true);

drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c

@@ -348,8 +348,8 @@ static int mdp5_plane_atomic_check_with_state(struct drm_crtc_state *crtc_state,
 	min_scale = FRAC_16_16(1, 8);
 	max_scale = FRAC_16_16(8, 1);
 
-	ret = drm_plane_helper_check_state(state, &clip, min_scale,
-					   max_scale, true, true);
+	ret = drm_plane_helper_check_state(state, crtc_state, &clip,
+					   min_scale, max_scale, true, true);
 	if (ret)
 		return ret;
 

drivers/gpu/drm/nouveau/nv50_display.c

@@ -1143,7 +1143,8 @@ nv50_curs_acquire(struct nv50_wndw *wndw, struct nv50_wndw_atom *asyw,
 {
 	int ret;
 
-	ret = drm_plane_helper_check_state(&asyw->state, &asyw->clip,
+	ret = drm_plane_helper_check_state(&asyw->state, &asyh->state,
+					   &asyw->clip,
 					   DRM_PLANE_HELPER_NO_SCALING,
 					   DRM_PLANE_HELPER_NO_SCALING,
 					   true, true);
@@ -1432,7 +1433,8 @@ nv50_base_acquire(struct nv50_wndw *wndw, struct nv50_wndw_atom *asyw,
 	if (!fb->format->depth)
 		return -EINVAL;
 
-	ret = drm_plane_helper_check_state(&asyw->state, &asyw->clip,
+	ret = drm_plane_helper_check_state(&asyw->state, &asyh->state,
+					   &asyw->clip,
 					   DRM_PLANE_HELPER_NO_SCALING,
 					   DRM_PLANE_HELPER_NO_SCALING,
 					   false, true);

drivers/gpu/drm/rockchip/rockchip_drm_vop.c

@@ -659,7 +659,7 @@ static int vop_plane_atomic_check(struct drm_plane *plane,
 	clip.x2 = crtc_state->adjusted_mode.hdisplay;
 	clip.y2 = crtc_state->adjusted_mode.vdisplay;
 
-	ret = drm_plane_helper_check_state(state, &clip,
+	ret = drm_plane_helper_check_state(state, crtc_state, &clip,
 					   min_scale, max_scale,
 					   true, true);
 	if (ret)

drivers/gpu/drm/tegra/dc.c

@@ -500,8 +500,8 @@ static int tegra_plane_state_add(struct tegra_plane *plane,
 	clip.y2 = crtc_state->mode.vdisplay;
 
 	/* Check plane state for visibility and calculate clipping bounds */
-	err = drm_plane_helper_check_state(state, &clip, 0, INT_MAX,
-					   true, true);
+	err = drm_plane_helper_check_state(state, crtc_state, &clip,
+					   0, INT_MAX, true, true);
 	if (err < 0)
 		return err;
 

drivers/gpu/drm/vmwgfx/vmwgfx_kms.c

@@ -454,7 +454,7 @@ int vmw_du_primary_plane_atomic_check(struct drm_plane *plane,
 		clip.y2 = crtc_state->adjusted_mode.vdisplay;
 	}
 
-	ret = drm_plane_helper_check_state(state, &clip,
+	ret = drm_plane_helper_check_state(state, crtc_state, &clip,
 					   DRM_PLANE_HELPER_NO_SCALING,
 					   DRM_PLANE_HELPER_NO_SCALING,
 					   false, true);

drivers/gpu/drm/zte/zx_plane.c

@@ -80,7 +80,7 @@ static int zx_vl_plane_atomic_check(struct drm_plane *plane,
 	clip.x2 = crtc_state->adjusted_mode.hdisplay;
 	clip.y2 = crtc_state->adjusted_mode.vdisplay;
 
-	return drm_plane_helper_check_state(plane_state, &clip,
+	return drm_plane_helper_check_state(plane_state, crtc_state, &clip,
 					    min_scale, max_scale,
 					    true, true);
 }
@@ -315,7 +315,7 @@ static int zx_gl_plane_atomic_check(struct drm_plane *plane,
 	clip.x2 = crtc_state->adjusted_mode.hdisplay;
 	clip.y2 = crtc_state->adjusted_mode.vdisplay;
 
-	return drm_plane_helper_check_state(plane_state, &clip,
+	return drm_plane_helper_check_state(plane_state, crtc_state, &clip,
 					    DRM_PLANE_HELPER_NO_SCALING,
 					    DRM_PLANE_HELPER_NO_SCALING,
 					    false, true);

include/drm/drm_plane_helper.h

@@ -38,7 +38,8 @@
  */
 #define DRM_PLANE_HELPER_NO_SCALING (1<<16)
 
-int drm_plane_helper_check_state(struct drm_plane_state *state,
+int drm_plane_helper_check_state(struct drm_plane_state *plane_state,
+				 const struct drm_crtc_state *crtc_state,
 				 const struct drm_rect *clip,
 				 int min_scale, int max_scale,
 				 bool can_position,